1. Introduction
Thank you for purchasing the OnLyee Projection Alarm Clock. This device combines a digital alarm clock with a projection feature, USB charging port, and battery backup for convenience. Please read this manual carefully to understand its functions and ensure proper operation.
2. Safety Instructions
- Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
- Avoid dropping or subjecting the clock to strong impacts.
- Use only the provided power adapter or a compatible 5V/1A adapter.
- Keep the device away from water or other liquids.
- Do not attempt to disassemble or repair the unit yourself. Contact customer support if service is required.
3. Package Contents
Verify that all items are present in the package:
- OnLyee Projection Alarm Clock
- Power Adapter
- User Manual
Image: The package contents include the projection alarm clock, power adapter, and user manual. The image also shows the clock in various room settings like a bedroom, kitchen, office, and living room.
4. Product Overview
Familiarize yourself with the clock's components and controls.
Image: A detailed view of the OnLyee Projection Alarm Clock, highlighting its dimensions (7.87 inches length, 3.15 inches height, 1.18 inches depth) and key features such as 5-level dimmer, dual alarm, 12/24 hours, adjustable volume, USB charger port, snooze function, 7-inch large screen, and reversible projection.
Control Buttons:
- TIME SET: Press to enter time setting mode.
- ALARM 1/2: Press to set Alarm 1 or Alarm 2.
- SNOOZE/DIMMER: Press to activate snooze or adjust display brightness.
- PROJECTION ON/OFF: Toggles the projection feature.
- 12/24H & DST: Switches between 12-hour and 24-hour format, and activates/deactivates Daylight Saving Time.
- VOLUME +/-: Adjusts alarm volume.
- PROJECTION ROTATION WHEEL: Adjusts projection angle.
- FOCUS RING: Adjusts projection clarity.
5. Setup
5.1 Powering On
- Connect the provided power adapter to the DC IN port on the back of the clock.
- Plug the adapter into a standard 100-240V AC power outlet. The display will light up.
- For battery backup, insert two AAA batteries (not included) into the battery compartment. This will preserve your settings during a power outage but will not power the display or projection.
5.2 Initial Time Setting
- Press and hold the TIME SET button for 3 seconds to enter time setting mode. The hour digits will flash.
- Use the +/- buttons to adjust the hour.
- Press TIME SET again to confirm the hour and move to minute setting. The minute digits will flash.
- Use the +/- buttons to adjust the minutes.
- Press TIME SET again to save the time and exit setting mode.
5.3 12/24 Hour Format & DST
- Press the 12/24H & DST button to switch between 12-hour (with AM/PM indicator) and 24-hour time formats.
- Press and hold the 12/24H & DST button for 3 seconds to activate or deactivate Daylight Saving Time (DST). An indicator will appear on the display when DST is active.
6. Operating the Clock
6.1 Display Brightness Adjustment
The clock display has 5 levels of brightness.
Image: The clock display showing 5 different brightness levels, from 100% to 5%, demonstrating the adjustable dimmer function for optimal viewing in various lighting conditions.
- Press the SNOOZE/DIMMER button repeatedly to cycle through the 5 brightness levels (100%, 75%, 50%, 25%, 5%).
6.2 Setting Alarms (Dual Alarms)
The clock features two independent alarms.
Image: Two scenarios demonstrating the dual alarm feature. One shows Alarm 1 set for 7:30 AM, and the other shows Alarm 2 set for 8:30 PM with the time projected onto the ceiling.
- Press the ALARM 1/2 button once to set Alarm 1. The alarm icon and hour digits will flash.
- Use the +/- buttons to adjust the hour.
- Press ALARM 1/2 again to confirm the hour and move to minute setting. The minute digits will flash.
- Use the +/- buttons to adjust the minutes.
- Press ALARM 1/2 again to save Alarm 1 time.
- Repeat steps 1-5 for Alarm 2 by pressing ALARM 1/2 twice initially.
- To turn an alarm ON or OFF, press the ALARM 1/2 button repeatedly until the corresponding alarm icon appears or disappears from the display.
6.3 Snooze Function
When an alarm sounds, you can activate the snooze function for an additional 9 minutes of sleep.
Image: A person reaching for the large SNOOZE/OK button on top of the alarm clock, which is displaying 7:30. The time is also projected onto the wall, indicating the snooze function provides an extra 9 minutes of sleep.
- When the alarm rings, press the large SNOOZE/DIMMER button on top of the clock. The alarm will pause for 9 minutes and then sound again.
- To stop the alarm completely, press any other button on the clock.
6.4 Projection Feature
The clock can project the time onto your ceiling or wall.
Image: The OnLyee Projection Alarm Clock projecting a blue digital time (23:15) onto a bedroom ceiling. The image also indicates an optimal projection distance of 1.64 to 11.4 feet and a button to flip the projection 180 degrees.
Image: The OnLyee Projection Alarm Clock projecting a red digital time (10:28) onto a bedroom ceiling. This image demonstrates the alternative color option for the projected time.
- Press the PROJECTION ON/OFF button to turn the projection on or off.
- Adjust the PROJECTION ROTATION WHEEL on the side of the projector to change the angle of the projected time (up to 180 degrees).
- Rotate the FOCUS RING on the projector lens to achieve a clear image at your desired distance (optimal distance: 1.64-11.4 feet / 0.5-3 meters).
- To flip the projected image 180 degrees, press the small button located near the projector lens.
6.5 USB Charging Port
- A USB charging port is located on the side of the clock.
- Connect your smartphone, tablet, or other USB-powered device to this port using a compatible USB cable to charge it.
6.6 Alarm Volume Adjustment
- Press the VOLUME +/- buttons to adjust the alarm sound level. There are 5 volume levels.
7. Maintenance
7.1 Cleaning
- Wipe the clock's surface with a soft, dry cloth.
- Do not use abrasive cleaners or solvents.
7.2 Battery Replacement
- If the battery backup function is not working, replace the two AAA batteries in the compartment on the bottom of the clock.
- Ensure correct polarity when inserting new batteries.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock display is off. | No power connection. | Ensure the power adapter is securely plugged into the clock and a working outlet. |
| Projection is blurry. | Focus not adjusted. | Rotate the focus ring on the projector lens until the image is clear. |
| Alarm does not sound. | Alarm is not activated or volume is too low. | Ensure the alarm icon is displayed and adjust the alarm volume using the +/- buttons. |
| Settings lost after power outage. | No battery backup or batteries are dead. | Install two fresh AAA batteries for backup. |
| USB charging not working. | Device not properly connected or clock not powered. | Ensure the clock is powered by AC and the USB cable is securely connected to both devices. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | OnLyee |
| Display Type | Digital LED |
| Power Source | Corded Electric (AC 100-240V), Battery Powered (2x AAA for backup) |
| Special Features | Projection, Dual Alarm, Snooze, Auto Dimmable Display, USB Charging Port, 12/24H Format, DST |
| Projection Angle | 180° Adjustable |
| Optimal Projection Distance | 1.64 - 11.4 ft (0.5 - 3 meters) |
| Display Size | 7-inch LED |
| Frame Material | Plastic |
| Room Type | Bedroom |
10. Warranty and Support
OnLyee products are designed for reliability and performance. For warranty information or technical support, please refer to the warranty card included with your purchase or contact OnLyee customer service through the retailer where the product was purchased.
