Introduction
Thank you for choosing the NuPhy Air60 Portable Wireless Mechanical Keyboard. This manual provides essential information for the proper setup, operation, and maintenance of your new keyboard. The Air60 is a compact 60% layout (64 keys) low-profile mechanical keyboard designed for versatility and portability, offering multiple connectivity options and broad compatibility.
Image: NuPhy Air60 keyboard highlighting its key features including ANSI 60% layout, ultra-thin PBT keycaps, 2.4G, Bluetooth & Wired connectivity, hot-swap PCB, AirFeet, NuFolio V2 compatibility, and RGB sidelit & backlit.
Setup
1. Unboxing and Initial Inspection
Carefully remove all components from the packaging. Ensure the following items are present:
- NuPhy Air60 Keyboard
- Keycap Puller
- USB Cable (Type-C)
- 2.4G Receiver
- Replacement Keycaps (for Windows layout)
- Foot Pads (magnetic)
2. Charging the Keyboard
Before first use, it is recommended to fully charge the keyboard. Connect the supplied USB-C cable to the keyboard's USB-C port and the other end to a power source (e.g., computer USB port or USB wall adapter). The keyboard features a 2500mAh battery, providing extended usage time.
3. Connecting the Keyboard
The Air60 supports three connection modes: 2.4G wireless, Bluetooth wireless, and wired USB-C.
Image: Top-down view of the NuPhy Air60 keyboard, showcasing its compact 60% layout with Gateron Red switches and multi-color keycaps.
3.1. 2.4G Wireless Connection
- Locate the 2.4G receiver in the packaging.
- Plug the 2.4G receiver into an available USB port on your computer.
- On the keyboard, switch the mode selector to the 2.4G position. The keyboard should automatically connect.
3.2. Bluetooth Wireless Connection
The Air60 can connect to up to four Bluetooth devices simultaneously.
- On the keyboard, switch the mode selector to the Bluetooth position.
- Press and hold the Fn key along with one of the Bluetooth channel keys (BT1, BT2, BT3, BT4, usually indicated by numbers 1-4 on the top row) for 3-5 seconds until the indicator light flashes rapidly, indicating pairing mode.
- On your device (Laptop, PC, Smartphone, Tablet), open Bluetooth settings and search for available devices.
- Select "NuPhy Air60" from the list to pair. The indicator light will stop flashing once connected.
- Repeat for other Bluetooth channels to connect additional devices.
3.3. Wired USB-C Connection
- Connect the supplied USB-C cable to the keyboard's USB-C port.
- Connect the other end of the USB-C cable to an available USB port on your computer.
- On the keyboard, switch the mode selector to the Wired position. The keyboard will function as a wired device and charge simultaneously.
4. Operating System Compatibility
The Air60 is compatible with Windows and Mac OS systems. Use the dedicated switch on the side of the keyboard to select the appropriate operating system layout (Win/Android or Mac/iOS). Replacement keycaps for Windows-specific keys are included for customization.
Image: NuPhy Air60 keyboard displaying the standard layout and additional keycaps for Windows users, including Alt and menu keys.
5. Laptop Integration (AirFeet)
The Air60 features four foot pads on its back, designed to fit perfectly between the keys of most laptop keyboards, including recent MacBooks. This allows the Air60 to sit directly on top of your laptop's keyboard, providing an enhanced typing experience without interfering with the laptop's built-in keys.
Image: The NuPhy Air60 keyboard positioned directly over a laptop keyboard, demonstrating its compatibility and ergonomic design for laptop users.
Operating the Keyboard
1. Basic Key Functions
The Air60 features a 60% layout, meaning some functions are accessed via the Fn key combination. Refer to the keycap legends for specific Fn layer functions, which typically include F-row keys (F1-F12), navigation keys (Home, End, PgUp, PgDn), and media controls.
2. Switching Between Connected Devices
To switch between paired Bluetooth devices, simply press Fn + BT1, Fn + BT2, Fn + BT3, or Fn + BT4. To switch to 2.4G mode, move the mode selector switch to 2.4G. For wired mode, ensure the USB-C cable is connected and the mode selector is set to Wired.
3. Backlight Control
The Air60 features RGB backlighting and sidelighting. Use Fn key combinations (refer to your keyboard's specific legends) to cycle through different lighting effects, adjust brightness, and change colors. Turning off the backlight can significantly extend battery life.
Maintenance
1. Cleaning the Keyboard
To clean the keyboard, power it off and disconnect any cables. Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution. For dust and debris between keycaps, use compressed air. Avoid spraying liquids directly onto the keyboard.
2. Keycap and Switch Replacement
The NuPhy Air60 features a hot-swappable PCB, allowing you to change mechanical switches without soldering. Use the included keycap puller to carefully remove keycaps, then use a switch puller (not included, but commonly available) to remove switches. When installing new switches, ensure the pins are aligned correctly to avoid damage.
Image: Close-up view of Gateron mechanical switches, illustrating the hot-swappable design of the keyboard.
Troubleshooting
1. Keyboard Not Responding
- Check Connection Mode: Ensure the mode selector switch is set to the correct position (2.4G, Bluetooth, or Wired).
- Battery Level: Connect the keyboard via USB-C to charge it. A low battery can prevent functionality.
- Wired Connection: If using wired mode, try a different USB-C cable or port.
- 2.4G Connection: Re-insert the 2.4G receiver into a different USB port.
- Bluetooth Connection: Re-pair the keyboard with your device. Ensure your device's Bluetooth is enabled.
2. Keys Not Registering or Double Typing
- Clean Under Keycaps: Remove the affected keycap and clean any debris around the switch using compressed air.
- Check Switch: If the issue persists, the switch might be faulty. As the keyboard is hot-swappable, you can replace the switch.
3. Bluetooth Disconnection Issues
- Interference: Move the keyboard closer to your device and away from other wireless devices that might cause interference.
- Re-pair: Delete the keyboard from your device's Bluetooth list and re-pair it.
- Firmware: Check the NuPhy website for any available firmware updates for your keyboard.
Specifications
| Model | NuPhy Air60 |
| Layout | 60% (64 keys) |
| Switches | Gateron Low-Profile Mechanical (Red Switch variant) |
| Connectivity | Bluetooth 5.0, 2.4G Wireless, USB-C Wired |
| Battery Capacity | 2500mAh |
| Backlighting | RGB (Backlit and Sidelit) |
| Compatible Devices | Laptop, PC, Smartphone, Tablet |
| Operating Systems | Windows, Mac OS, Android, iOS |
| Product Dimensions | 11.69 x 4.21 x 0.67 inches (29.7 x 10.7 x 1.7 cm) |
| Item Weight | 1.79 pounds (0.81 kg) |
Warranty and Support
1. Product Warranty
The NuPhy Air60 keyboard is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty information provided with your purchase or visit the official NuPhy website for specific terms and conditions.
2. Customer Support
For technical assistance, troubleshooting, or warranty claims, please visit the official NuPhy support page on their website. You can find FAQs, driver downloads, and contact information for customer service there.
