Introduction
This manual provides comprehensive instructions for the operation and maintenance of your Timex Men's Expedition Vibe Shock 50mm Watch. Designed for durability and functionality, this timepiece features a shock-resistant construction, advanced timing functions, and water resistance suitable for various activities. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your watch.
Setup
Battery Installation
Your Timex Expedition Vibe Shock watch comes with a Lithium Metal battery (CR2032) included and pre-installed. No initial battery installation is typically required. If the display is dim or unresponsive, the battery may need replacement. Battery replacement should be performed by a qualified watch technician to maintain water resistance.
Initial Time and Date Setting
To set the time and date, refer to the watch's buttons. The watch typically features buttons labeled "MODE/NEXT", "START/SPLIT", "STOP/RESET", and "INDIGLO".
- Press the MODE/NEXT button repeatedly until the time setting mode is displayed.
- Use the START/SPLIT or STOP/RESET buttons to adjust the flashing digits (hours, minutes, seconds).
- Press MODE/NEXT to move to the next setting (e.g., date, month, day of week).
- Once all settings are adjusted, press the DONE/SET button (if available, or the MODE/NEXT button again) to exit the setting mode.
Note: Specific button functions may vary slightly. Consult the on-screen prompts for guidance.
Figure 1: Front view of the Timex Expedition Vibe Shock watch, displaying its digital interface and button labels.
Operating Instructions
Chronograph (Stopwatch)
The watch features a 100-hour chronograph for measuring elapsed time.
- From the main time display, press MODE/NEXT until "CHR" (Chronograph) appears.
- Press START/SPLIT to begin timing.
- Press START/SPLIT again to record a split time or lap time without stopping the main timer.
- Press STOP/RESET to pause the chronograph. Press START/SPLIT to resume.
- To reset the chronograph, press STOP/RESET while the chronograph is paused.
Countdown Timer
A 24-hour countdown timer is available for specific activities.
- Press MODE/NEXT until "TMR" (Timer) appears.
- Set the desired countdown duration using the START/SPLIT or STOP/RESET buttons.
- Press START/SPLIT to begin the countdown.
- The watch will provide an audible or vibrating alert when the timer reaches zero.
Alarms
Set up to 3 vibrating and audible daily, weekday, or weekend alarms.
- Press MODE/NEXT until "ALM" (Alarm) appears.
- Select an alarm (AL1, AL2, AL3) and set the desired time using START/SPLIT or STOP/RESET.
- Choose the alarm type: daily, weekday, or weekend.
- Activate or deactivate the alarm.
Indiglo Night-Light
Press the INDIGLO button to illuminate the watch dial for easy viewing in low-light conditions.
Figure 2: Side profile of the watch, highlighting the robust case and button placement.
Maintenance
Cleaning Your Watch
To clean your watch, wipe it with a soft, damp cloth. For resin straps, mild soap and water can be used. Avoid harsh chemicals or abrasive materials that could damage the watch case or strap.
Water Resistance
This watch is water resistant to 200 meters (660 feet). This rating makes it suitable for professional marine activity and serious surface water sports. It is not suitable for scuba diving.
- Do not operate the watch buttons while submerged in water to maintain water resistance.
- Avoid exposing the watch to extreme temperature changes, which can affect its water resistance.
- After exposure to saltwater, rinse the watch with fresh water and dry it thoroughly.
Figure 3: Water resistance chart, detailing suitable activities for various depth ratings. This watch is rated for 200 meters.
Troubleshooting
- Watch display is dim or blank: The battery may be low or depleted. Replace the battery (CR2032) by a qualified technician.
- Buttons are unresponsive: Ensure the watch is not in a locked mode. If the issue persists, a soft reset may be required (refer to online manual or contact support).
- Time is inaccurate: Re-set the time and ensure the correct time zone is selected. If the problem continues, the watch may require servicing.
- Water inside the watch: Immediately take the watch to a professional watch repair service. Do not attempt to open the watch yourself, as this will void the warranty and compromise water resistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | TW4B242009J |
| Case Diameter | 50mm |
| Strap Material | Resin |
| Strap Width | 22mm |
| Water Resistance | 200m (660 ft) |
| Crystal Material | Mineral Crystal |
| Battery Type | 1 Lithium Metal (CR2032) |
| Chronograph | 100-hour |
| Countdown Timer | 24-hour |
| Alarms | 3 vibrating & audible (daily, weekday, weekend) |
| Special Features | Shock Resistant (I.S.O. standards), Indiglo Night-Light, 24-hour military time mode, Time Zones |
| Weight | 2.88 ounces |
Warranty and Support
Timex watches are manufactured to high quality standards and are covered by a limited warranty against manufacturing defects. For specific warranty details, duration, and terms, please refer to the warranty card included with your purchase or visit the official Timex website.
For technical support, service, or to purchase replacement parts, please contact Timex customer service or visit their official brand store:
When contacting support, please have your watch model number (TW4B242009J) and purchase information readily available.
