Introduction
This manual provides comprehensive instructions for assembling, operating, and maintaining your Mould King 13080 Vintage Car Building Kit. This kit features 3564 high-quality ABS pieces, designed for an engaging and rewarding building experience. The finished model serves as both a decorative piece and a collector's item.
The model dimensions are approximately 64 cm (25.1 inches) long, 21 cm (8.0 inches) wide, and 18 cm (6.8 inches) high.
Image: The Mould King 13080 Vintage Car Building Kit, fully assembled, showcasing its dimensions of 25.1 inches length, 8.0 inches width, and 6.8 inches height.
1. Setup and Assembly
The Mould King 13080 kit is designed for straightforward assembly. Follow the detailed instructions provided in the separate instruction manual included in your package.
1.1 Unpacking
- Carefully open the product packaging.
- Verify all numbered bags of building blocks are present according to the packing list.
- Locate the detailed instruction manual.
1.2 Assembly Process
- Follow the step-by-step instructions in the included manual. Each step is illustrated for clarity.
- Organize pieces by bag number as indicated in the manual to simplify the building process.
- Ensure each connection is firm to maintain the structural integrity of the model.
Image: An example of a building block assembly sequence, illustrating the detailed steps involved in constructing a model.
2. Operating Features
The Mould King 13080 Vintage Car model includes several interactive features designed to enhance its realism and display value.
2.1 Opening Hood and Engine Detail
The hood of the vintage car can be opened to reveal a detailed engine compartment, showcasing the intricate design of the model's internal components.
Image: Close-up view of the Mould King 13080 model with the hood open, revealing the detailed engine assembly.
2.2 Functional Doors
The classic front doors of the model are designed to open, allowing a view into the detailed interior cabin.
Image: Close-up of the Mould King 13080 model showing a classic front opening door mechanism.
2.3 Switchable Gear Mode
The model features a switchable gear mode mechanism, adding to its interactive elements and showcasing engineering principles.
Image: Close-up of the Mould King 13080 model's interior, highlighting the switchable gear mode mechanism.
2.4 Simulation Spare Tire
A detailed simulation spare tire is included, enhancing the authentic vintage car appearance.
Image: Close-up of the Mould King 13080 model's rear, showing the detailed simulation spare tire.
3. Maintenance
To ensure the longevity and appearance of your Mould King 13080 Vintage Car model, follow these simple maintenance guidelines:
- Cleaning: Dust the model regularly with a soft, dry cloth or a soft brush. For stubborn dirt, lightly dampen a cloth with water (no harsh chemicals) and gently wipe.
- Storage: Store the model in a cool, dry place away from direct sunlight to prevent discoloration and material degradation.
- Handling: Handle the model carefully to avoid accidental disassembly or damage to delicate parts.
- Disassembly: If partial disassembly is required for cleaning or modification, refer to the original instruction manual for guidance on proper part removal and reassembly.
4. Troubleshooting
This section addresses common issues you might encounter during assembly or with the finished model.
4.1 Missing Pieces
If you discover any missing pieces during assembly:
- Double-check all packaging materials and bags to ensure no small pieces were overlooked.
- Refer to the packing list in your instruction manual to confirm the missing part number.
- Contact Mould King customer support (see Section 7. Customer Support) with details of the missing parts. The manufacturer is committed to ensuring complete kits.
4.2 Loose Connections or Instability
If parts feel loose or the model is unstable:
- Review the assembly steps for the affected section in the instruction manual.
- Ensure all blocks are firmly pressed together. Sometimes, a piece may not be fully seated.
- Verify that the correct pieces were used for each step, as similar-looking pieces can sometimes be confused.
4.3 Difficulty with Interactive Features
If doors, hood, or gear mechanisms are stiff or not functioning smoothly:
- Check for any misaligned or incorrectly placed pieces obstructing movement.
- Ensure that all connecting pins and axles are properly inserted and not bent.
- Avoid forcing parts; gentle manipulation should be sufficient.
5. Product Specifications
| Feature | Detail |
|---|---|
| Brand | Mould King |
| Model Name | Mould King 13080 |
| Model Number | WX13080-HJY |
| Number of Pieces | 3564 |
| Material | High-quality ABS Plastic |
| Color | Green (Note: Product images often show a yellow/black variant, but this specific variant is Green) |
| Dimensions (L x W x H) | 63.5 x 20.3 x 17.3 cm (25.1 x 8.0 x 6.8 inches) |
| Item Weight | 2.4 Grams (Note: This value appears unusually low for a 3564-piece kit and may be a data entry error. Actual weight will be significantly higher.) |
| Recommended Age | 8 years and up |
| Educational Objective | Creative Thinking, Practical Skills, Imagination |
| Power Source | Manual (No batteries required for core model, unless motorization kit is added separately) |
| UPC | 731694942191 |
6. Warranty Information
Mould King products are rigorously checked to meet high safety and quality standards. While specific warranty details are not provided in this manual, the manufacturer ensures product quality and completeness.
In case of manufacturing defects or missing parts, please retain your proof of purchase and contact customer support for assistance. The manufacturer is committed to resolving issues related to product quality and completeness.
7. Customer Support
For any questions, concerns, or assistance with your Mould King 13080 Vintage Car Building Kit, please contact our customer support team.
- Online Support: Visit the official Mould King website or the retailer's support page where you purchased the product.
- Missing Parts: If you encounter missing pieces, please refer to the "Troubleshooting" section and contact support with the specific part numbers from your instruction manual.
- General Inquiries: For assembly tips, product information, or other inquiries, please reach out to the seller or manufacturer directly.
We are dedicated to providing a satisfactory building experience.
Image: An image indicating support for replacement parts, showing the Mould King 13080 kit box and the assembled car.