1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your BURCAM 600652SS 16 US gallon stainless horizontal steel captive air pressure tank. Please read this manual thoroughly before use and retain it for future reference.
Product Overview
The BURCAM 600652SS 16 US gallon stainless horizontal steel captive air pressure tank is engineered for use with water systems that utilize either a jet pump or a deep well submersible pump. Its design incorporates a replaceable bladder made of synthetic butyl rubber, enhancing both reliability and lifespan. The tank features a stainless steel flange with a 1-inch NPT connection, ensuring no water-to-metal contact for rust-free operation.
Key Features
- Horizontal Pressure Tank: 16 gallon stainless steel tank with a synthetic butyl rubber bladder for reliability and long lifespan. Designed with no water to air contact and no water to tank contact.
- Corrosion-Resistant Tank Body: Constructed from stainless steel for cleaner water and enhanced durability.
- Jet Pump Replacement Tank: This pressure tank is suitable as a direct replacement for conventional steel tanks.
- Easy Installation: Specifically designed for straightforward integration into water systems assembled with a jet pump.
- Versatile Application: Ideal for use in cottages, farms, and homes requiring a larger sized pressure tank.
Figure 1: Front view of the BURCAM 600652SS 16 Gallon Horizontal Stainless Steel Pressure Tank, showcasing its polished stainless steel finish and robust construction.
2. Safety Information
Always observe the following safety precautions to reduce the risk of injury or property damage. Failure to follow these instructions may result in serious injury or death.
- Electrical Safety: Ensure all electrical connections to the pump and pressure switch are made by a qualified electrician and comply with local codes. Disconnect power before servicing.
- Pressure Safety: Never exceed the maximum working pressure of the tank. Always relieve system pressure before performing any maintenance or adjustments.
- Installation: Install the tank on a level, stable surface capable of supporting its full weight when filled with water.
- Water Quality: This tank is designed for use with potable water. Do not use with flammable liquids or chemicals.
- Children and Pets: Keep children and pets away from the pressure tank and associated plumbing.
- Temperature: Do not install the tank in an area where it may be exposed to freezing temperatures.
3. Setup and Installation
Proper installation is crucial for the optimal performance and longevity of your pressure tank. This tank is designed for easy integration into water systems using a jet pump or deep well submersible pump.
Pre-Installation Checks
- Inspect the tank for any shipping damage.
- Ensure the installation location is dry, protected from freezing, and has adequate space for maintenance.
- Verify that the existing pump and pressure switch are compatible with the tank's specifications.
Air Precharge Adjustment
The tank comes precharged from the factory, but the air pressure must be adjusted to match your system's pressure switch settings before connecting to the water supply. Use an accurate pressure gauge to check and adjust the air pressure through the Schrader valve located on the tank.
- For a 20/40 PSI pressure switch: Adjust tank precharge to 18 PSI.
- For a 30/50 PSI pressure switch: Adjust tank precharge to 28 PSI.
Important: Always adjust the air precharge when the tank is empty of water.
Connecting the Tank
- The tank features a 1-inch NPT connection on its stainless steel flange.
- Connect the tank to your water system's main line using appropriate plumbing fittings. Ensure all connections are watertight.
- Use thread sealant on all threaded connections to prevent leaks.
- Secure the tank in its final position, ensuring it is stable and level.
Figure 2: Detailed view of the BURCAM 600652SS pressure tank, highlighting key specifications such as NPT connection size, recommended precharge pressures for different pressure switches, and drawdown capacities. This image also shows the overall design and the BURCAM logo.
4. Operation
Once installed and properly precharged, the BURCAM 600652SS pressure tank operates automatically in conjunction with your water pump and pressure switch to maintain consistent water pressure in your system.
How it Works
- When the pump starts, it fills the tank with water, compressing the air in the bladder.
- As water is drawn from the system, the compressed air pushes the water out, providing a steady flow without the pump needing to run constantly.
- The pressure switch monitors the system pressure and turns the pump on when pressure drops to the cut-in setting and off when it reaches the cut-out setting.
Drawdown Capacity
The drawdown capacity refers to the amount of water the tank can deliver between pump cycles. This tank offers:
- 5 US gallons (with a 20/40 PSI pressure switch)
- 4 US gallons (with a 30/50 PSI pressure switch)
Understanding drawdown helps optimize pump cycling and extend pump life.
5. Maintenance
Regular maintenance ensures the longevity and efficient operation of your BURCAM pressure tank. The tank's design, featuring a synthetic butyl rubber bladder and stainless steel construction, minimizes maintenance needs.
Annual Air Pressure Check
- At least once a year, or if you notice frequent pump cycling, check the tank's air precharge.
- Procedure:
- Turn off the power to the pump.
- Drain all water from the system by opening a faucet downstream from the tank.
- Use an accurate tire pressure gauge to check the air pressure at the Schrader valve.
- Add or release air as necessary to match the recommended precharge for your pressure switch (18 PSI for 20/40 PSI switch, 28 PSI for 30/50 PSI switch).
- Close the faucet, restore power to the pump, and allow the system to repressurize.
Inspection
- Periodically inspect the tank for any signs of external damage, leaks, or corrosion. The stainless steel construction is designed to be rust-free.
- Check all plumbing connections for leaks and tighten if necessary.
The replaceable bladder design contributes to the tank's long lifespan and ease of service, as there is no water-to-metal contact within the tank, preventing internal corrosion.
6. Troubleshooting
This section provides solutions to common issues you might encounter with your pressure tank. For problems not listed here, or if solutions do not resolve the issue, contact BURCAM Technical Service.
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump cycles too frequently (short cycling) | Low or no air precharge in the tank; Waterlogged tank; Leaking plumbing. | Check and adjust tank air precharge (see Section 5); Inspect for and repair any leaks in the system. |
| Low water pressure | Incorrect tank precharge; Pump issue; Clogged filter/pipes. | Verify and adjust tank precharge; Check pump operation; Inspect and clean filters. |
| Water leaking from air valve | Damaged bladder. | The bladder may need replacement. Contact BURCAM Technical Service for assistance. |
| Tank not holding air pressure | Leaky air valve stem; Damaged bladder. | Tighten or replace air valve core; If issue persists, bladder may be damaged (contact support). |
7. Specifications
Detailed technical specifications for the BURCAM 600652SS pressure tank:
| Model Number | 600652SS |
| Manufacturer | BURCAM |
| Capacity | 16 US Gallons |
| Material | Stainless Steel |
| Bladder Material | Synthetic Butyl Rubber |
| Connection Type | 1 inch NPT |
| Recommended Precharge (20/40 PSI switch) | 18 PSI |
| Recommended Precharge (30/50 PSI switch) | 28 PSI |
| Drawdown (20/40 PSI) | 5 US Gallons |
| Drawdown (30/50 PSI) | 4 US Gallons |
| Product Dimensions (L x W x H) | 45.72 x 45.72 x 45.72 cm (approx. 18 x 18 x 18 inches) |
| Item Weight | 9.07 kg (approx. 20 lbs) |
| Style | Above Ground |
| UPC | 772910066529 |
8. Warranty and Support
BURCAM stands behind the quality of its products. Your BURCAM 600652SS pressure tank comes with a comprehensive warranty and dedicated technical support.
Warranty Information
This product is covered by a 2-Year Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service.
Please retain your proof of purchase for warranty claims.
Technical Assistance
Should you require additional assistance with installation, have questions regarding warranty issues, or need further information about your BURCAM product, please do not hesitate to contact our Technical Service Line:
Telephone: 1.800.361.1820
Our team is available to provide expert guidance and support.
