PEMP PP-5823-11

PEMP Ultra-Thin 12.3-inch Display User Manual

For BMW 5 Series E60 CCC (2005-2010) - CarPlay, Android Auto, Mirror Link Head Unit

1. Introduction

This manual provides detailed instructions for the installation, operation, and troubleshooting of your PEMP Ultra-Thin 12.3-inch Display Head Unit. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. Safety Information

  • Power Off: Ensure the vehicle's power is completely off before beginning any installation or wiring procedures.
  • Professional Installation: If you are unsure about any part of the installation process, it is recommended to seek professional assistance.
  • Cable Management: Secure all cables to prevent interference with vehicle operation or damage.
  • Compatibility: This unit is specifically designed for BMW 2005-2010 E60 3 Series vehicles with the CCC Original 10 PIN LVDS system. Verify your vehicle's compatibility before installation.

3. Compatibility

This PEMP Ultra-Thin 12.3-inch Display Head Unit is compatible with:

  • Vehicle Models: BMW 5 Series E60 (2005-2010)
  • Original System: CCC Original 10 PIN LVDS system.

Important: Please confirm your OEM display has the Aux Audio Menu. If not, an activator (ASIN: B08XXF2T5Q) may be required to activate Aux Audio first.

Image showing compatible 10 PIN CCC UI and incompatible 4 PIN CIC UI for BMW E60
Figure 3.1: Applicable Models - Confirm your vehicle has the 10 PIN CCC UI, not the 4 PIN CIC UI.

4. Product Features

  • Ultra-Thin Design: 12.3-inch large display with an 82.3% screen-to-body ratio, metal material shell, and Non-Airgap process for realistic picture quality.
  • Connectivity: Supports Wired and Wireless CarPlay and Android Auto.
  • Operating System: Linux System for quick boot-up and fast access to CarPlay/Android Auto interface.
  • OEM Integration: Supports factory monitor information display. Long press the Menu button to switch between the factory OEM interface and the CarPlay interface.
  • Controls: Supports steering wheel button functions.
  • Display Quality: Multi-Point Capacitive Touch Screen, 12.3-inch HD IPS Display Screen with a resolution of 1920 x 720.
  • Camera Support: Supports the car's reversing camera and radar information display. Compatible with OEM cameras and aftermarket cameras (720P or less). Provides clear reversing picture.
Image showing wireless CarPlay, Android Auto, Mirror Link, 82.3% screen-to-body ratio, 1920x720 resolution, and 12.3 inch display.
Figure 4.1: Key features including wireless connectivity and display specifications.
Exploded view of the ultra-thin screen showing metallic silver trim, full-lamination screen, 2.5D curved screen, pure aluminum hardware shell, CPU, and V-shaped heat sink.
Figure 4.2: Internal components and design of the ultra-thin display.
Video 4.1: A demonstration of the ultra-thin screen's design and functionality.

5. Setup and Installation Guide

Safety First: Ensure your car is completely powered off before starting installation.

5.1. General Installation Overview

Before and after installation comparison of the car's dashboard with the new 12.3-inch display.
Figure 5.1: Visual comparison of the car's interior before and after installing the PEMP display.
Product comparison showing an old style non-centered display versus the new PEMP style centered design.
Figure 5.2: Product comparison highlighting the centered design of the PEMP display.

5.2. Fiber Optic Cable Connection

If your OEM ISO harness includes a fiber optic cable, it must be adapted to the PEMP ISO harness for proper functionality.

Diagram showing how to transfer the 2P green optical fiber cable from the original CD unit to the Linux harness.
Figure 5.3: Diagram for connecting the fiber optic cable.
Video 5.1: Detailed instructions on how to connect the fiber optic cable and address potential sound issues.

5.3. Wired CarPlay and Android Auto Connection

For wired CarPlay and Android Auto, ensure your device is connected to USB IN 1.

Diagram showing USB IN 1 and USB IN 2 connections, indicating USB IN 1 for wired CarPlay and Android Auto.
Figure 5.4: Connect wired CarPlay/Android Auto to USB IN 1.

6. Operating Instructions

6.1. Switching Between OEM and New System

You can easily switch between your original BMW interface and the PEMP display's interface by long-pressing the Menu button on your iDrive controller.

Image showing the ability to switch between OEM car information and the new system's CarPlay/Android Auto interface.
Figure 6.1: Seamless switching between OEM and new system interfaces.

6.2. Camera Settings

The unit supports both OEM and aftermarket front and rear view cameras. You can select the camera type in the settings menu.

  1. Go to Setup.
  2. Select Car settings.
  3. Choose Reversing Settings.
  4. Select Camera type (Original Camera or Aftermarket Camera).
Image showing support for OEM and aftermarket front and rear view cameras, with settings for camera type and format.
Figure 6.2: Camera settings interface and visual representation of camera support.
Screenshot of the camera type selection menu within the settings.
Figure 6.3: Camera Type selection in settings.

7. Troubleshooting

7.1. No Sound Issue

If you experience no sound from the display, follow these steps:

  1. Check OEM Audio: Press the FM/AM button on your original radio to confirm if the OEM radio has sound.
  2. Bluetooth Disconnection: If the OEM radio has sound, go to Settings > System on the PEMP unit. Turn off "Use Car's BT Channel". Then, disconnect the original Bluetooth from your phone's settings.
  3. AUX Feature: After disconnecting Bluetooth, go to the car's settings and select "Auto Switch to AUX" feature off.
  4. Adjust Volume: Go back to the original car interface, select AUX Front. If there is still no sound, adjust the volume knob on your car's radio.
  5. AUX Harness: If there is still no sound, you may need to connect the AUX harness. This involves connecting the provided AUX cable from the PEMP unit to your car's AUX-IN port, usually found in the center console.
  6. ISO Harness Check: Ensure the ISO harness is securely plugged in. If it feels loose, unplug and re-plug it firmly.
  7. Power/LVDS Cables: Check that the power cable and LVDS cables on the back of the PEMP machine are not loose. Re-plug them if necessary.
Diagram showing automatic and manual AUX setting methods, including navigating through car settings and long-pressing button 8.
Figure 7.1: Automatic and manual AUX setting methods.
Troubleshooting guide for 'Why can't hear the sound' with steps to check AUX audio menu and use an E60 AUX activator.
Figure 7.2: Troubleshooting steps for no AUX audio menu, suggesting an activator.
Video 7.1: A video guide on how to fix the no sound issue, including checking OEM Bluetooth and AUX connections.

7.2. Splash Screen / OEM Resolution Issues

If your screen displays a splash screen or distorted image, adjust the resolution:

  1. Go to Settings > Car Settings.
  2. Select Original Car's Screen Resolution.
  3. Slide through the options to find your car's suitable resolution.
  4. Select the correct resolution and return to the original car interface. The display should now be normal.
Screenshot of the screen resolution settings menu.
Figure 7.3: Screen Resolution Adjustment in settings.
Video 7.2: A video guide on how to resolve OEM resolution issues, including adjusting screen resolution settings.

8. Specifications

FeatureSpecification
Model NumberPP-5823-11
Display Size12.3 Inches
Display Resolution1920x720
Operating SystemLinux
Connectivity TechnologyBluetooth
Special FeaturesBluetooth, Touchscreen, Built-in CarPlay and Android Auto
Audio Output ModeAUX
Item Weight7.33 pounds
Product Dimensions12.99 x 5.12 x 1.06 inches

9. Warranty and Support

For warranty information, technical support, or any inquiries regarding your PEMP product, please refer to the contact information provided with your purchase or visit the official PEMP website. Keep your purchase receipt as proof of purchase for warranty claims.

You can also visit the PEMP Store on Amazon for additional product information and support resources.

© 2024 PEMP. All rights reserved.

Related Documents - PP-5823-11

Preview PEMP User Manual: Navigating Your Device Interface and Settings
Comprehensive user manual for PEMP devices, detailing interface navigation, setup options, connection methods for Carplay, Android Auto, Airplay, and Bluetooth, along with audio and display settings.
Preview PEMP PP-5810 Installation Manual for BMW E60 (2005-2010)
Detailed installation manual for the PEMP PP-5810 aftermarket car stereo system, designed for BMW E60 models from 2005 to 2010. Includes step-by-step instructions and wiring diagrams.
Preview PEMP PP-537885388 Installation Manual for BMW F10
Detailed installation manual for the PEMP PP-537885388 car multimedia system, compatible with BMW F10 models (2010-2012 & 2013-2017). Includes wiring diagrams and step-by-step visual guides.
Preview PEMP PP-5603 Car Infotainment System Installation Guide for BMW i3 NBT EVO
Comprehensive installation manual for the PEMP PP-5603 Android/Linux car infotainment system, compatible with BMW i3 NBT EVO (2013-2019) models. Includes step-by-step instructions and system connection details.
Preview PEMP B-C-CCC Multimedia Interface Installation Manual
Comprehensive installation guide for the PEMP B-C-CCC multimedia interface, detailing wiring, connections, and step-by-step procedures for integrating with original car systems.
Preview PEMP PP-5245 Installation Manual for BMW F15 (2014-2016)
Step-by-step installation guide for the PEMP PP-5245 car navigation system, compatible with BMW F15 models from 2014 to 2016. Includes wiring overview and detailed visual instructions.