1. Introduction
This manual provides detailed instructions for the proper use and maintenance of your TooQ TQR-220B External Electronic ID Reader. Please read this manual thoroughly before using the device to ensure optimal performance and to prevent damage.
The TooQ TQR-220B is designed for secure reading of electronic ID cards (DNIe) and other smart cards, facilitating online transactions, digital signatures, and access to public administration services.
2. Product Overview
The TQR-220B is a compact and plug-and-play smart card reader. It features a USB 2.0 interface with a USB-A connector for easy connection to your computer.
Figure 2.1: TooQ TQR-220B Electronic ID Reader. This image shows the compact black reader unit with its integrated USB-A cable, ready for connection.
Key Features:
- Interface: USB 2.0 with USB-A connector.
- Compatibility: Fully compatible with DNI 3.0 (Spanish Electronic ID) and Cartão de Cidadão (Portuguese Identity Document).
- Supported Card Types: 5V, 3V, and 1.8V smart cards.
- Standards: Supports ISO-7816 and EMV2 2000 Level 1.
- Certifications: CE, FCC, VCCI, CCID, Microsoft WHQL.
- LED Indicators: Red LED for power on, Green LED for reading/writing activity.
3. Setup and Installation
The TooQ TQR-220B is designed for plug-and-play operation, requiring minimal setup.
System Requirements:
- Operating System: Windows (XP/Vista/7/8/10/11), macOS, Linux.
- Available USB-A port.
- Internet connection for driver download (if not automatically installed).
Installation Steps:
- Connect the Reader: Plug the USB-A connector of the TQR-220B into an available USB port on your computer.
- Driver Installation:
- For most modern operating systems (Windows 10/11, recent macOS, Linux distributions), the necessary drivers will be installed automatically upon connection.
- If automatic installation does not occur, or if you are using an older operating system, you may need to download the drivers from the official TooQ website. Refer to the support section of www.tooq.com for the latest drivers.
- Verify Installation: Once connected, the red LED on the reader should illuminate, indicating it is powered on. You can verify the device installation in your computer's Device Manager (Windows) or System Information (macOS).
4. Operation
Using the TooQ TQR-220B to read your electronic ID or smart card is straightforward.
Inserting a Smart Card:
- Ensure the reader is connected to your computer and the red LED is on.
- Locate the smart card slot on the top of the TQR-220B.
- Insert your electronic ID card (e.g., DNIe) or smart card into the slot with the chip facing upwards and towards the reader, as shown in the image below. Push the card gently until it is fully seated.
Figure 4.1: Inserting a DNIe Card. This image illustrates the correct orientation for inserting an electronic ID card into the reader, with the chip visible and facing upwards.
Reading and Writing:
- Once the card is inserted, the green LED will flash or remain solid, indicating active communication (reading or writing) with the smart card.
- Use the appropriate software application (e.g., DNIe software, banking applications, digital signature tools) on your computer to interact with the smart card.
- Do not remove the card while the green LED is active, as this may interrupt data transfer or corrupt the card.
Removing a Smart Card:
Once your operation is complete and the green LED is no longer active, gently pull the smart card out of the slot.
5. LED Indicators
The TooQ TQR-220B features two LED indicators to provide status information:
- Red LED:
- On (Solid): Indicates that the device is powered on and ready.
- Green LED:
- On (Solid/Flashing): Indicates active communication (reading or writing) with an inserted smart card.
- Off: No smart card inserted or no active communication.
6. Specifications
Detailed technical specifications for the TooQ TQR-220B Electronic ID Reader:
| Feature | Description |
|---|---|
| Model | TQR-220B |
| Interface | USB 2.0 (USB-A Connector) |
| Supported Card Types | 5V, 3V, and 1.8V Smart Cards (ISO-7816 Class A, B, C) |
| Compatibility | DNI 3.0, Cartão de Cidadão, EMV2 2000 Level 1 |
| Operating Systems | Windows (XP/Vista/7/8/10/11), macOS, Linux |
| Certifications | CE, FCC, VCCI, CCID, Microsoft WHQL |
| LED Indicators | Red (Power On), Green (Read/Write Activity) |
| Color | Black |
| Dimensions (Approx.) | 70 mm (L) x 45 mm (W) x 57 mm (H) |
Figure 6.1: Product Dimensions. This diagram provides the approximate measurements of the TQR-220B reader for reference.
7. Troubleshooting
If you encounter issues with your TooQ TQR-220B, refer to the following common problems and solutions:
| Problem | Possible Cause / Solution |
|---|---|
| Reader not recognized by computer. |
|
| Red LED is off. |
|
| Green LED does not light up when card is inserted. |
|
| Software application cannot read the card. |
|
8. Maintenance
To ensure the longevity and proper functioning of your TooQ TQR-220B, follow these simple maintenance guidelines:
- Cleaning: Use a soft, dry, lint-free cloth to clean the exterior of the reader. Do not use liquid cleaners, aerosols, or abrasive solvents.
- Storage: Store the reader in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid dropping the device or subjecting it to strong impacts. Do not force cards into the slot.
- Cable Care: Do not bend or crimp the USB cable excessively. Always grasp the plug when disconnecting, not the cable itself.
9. Warranty and Support
TooQ products are designed for reliability and performance. For warranty information and technical support, please visit the official TooQ website or contact their customer service.
- Official Website: For the latest drivers, FAQs, and support resources, please visit www.tooq.com.
- Customer Service: Refer to the contact section on the TooQ website for regional support details.
Please retain your proof of purchase for warranty claims.
