Introduction
This manual provides comprehensive instructions for the DieseRC 433.92MHz Fixed Code Clone Remote Control, Model KT16C. This device is designed to duplicate existing fixed code remote controls, offering a convenient solution for various applications. Please read this manual thoroughly before attempting to use or program the remote control.
The package includes 3 cloner remote controls. Each remote features 4 keys, operates at an RF frequency of 433MHz, and has a transmitter range of over 50 meters in open space. It is powered by 2x CR2016 batteries (included).
Important Compatibility Notice
Before purchasing or attempting to clone, please confirm the following three conditions:
- The original remote control must be functioning normally.
- The frequency of the original remote control must be 433.92Mhz.
- The chip code (encoder chip) of the original remote must be one of the following fixed codes: 2260, 2262 (e.g., PT2262, SC2262, HS2262, LX2262, HX2262), 1527 (EV1527, HS1527, HX1527, SC1527, GP1527, CP1527, AD1527, SCL1527, TL1527, ZX1527), PT2264, PT2240 (LX2240, LX2241, SCL2240), CS5211, SMC918, AX5026, SMC926, AX5326-3, AX5326-4, FP527, HT600, HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F630, ULN2003.
Note: Rolling code remotes will not work with this device. This cloner remote can only copy fixed codes.
Product Overview
The DieseRC Fixed Code Clone Remote Control is a compact and durable device designed for ease of use. It features four independent buttons (A, B, C, D) allowing you to clone up to four different functions from your original fixed code remote.
Image: The DieseRC 433.92MHz Fixed Code Clone Remote Control, a black keychain-style remote with four buttons (A, B, C, D) and a red 'D' button.
Image: A diagram highlighting the features of the remote control, including silicone buttons, an indicator light, a chrome bezel, and a metal keychain.
Setup and Programming
1. Resetting the Remote Control
Before cloning, it is essential to clear any pre-existing codes from the cloner remote. Follow these steps:
- Press and hold buttons A and B on the cloner remote control simultaneously. The LED indicator will flash three times.
- While continuing to hold button A, release button B.
- Press button B three times. The LED will flash rapidly and then turn off, indicating a successful reset.
2. Programming (Cloning) the Remote Control
To clone a function from your original remote to the DieseRC cloner remote, follow these steps:
- Place your original remote control and the cloner remote control in a "back-to-back" position. Ensure they are in direct contact or as close as possible (e.g., side-by-side on a desktop with zero distance).
- Press and hold one key on your original remote control.
- While still holding the key on the original remote, press and hold the corresponding key on your cloner remote control that you wish to program.
- Keep holding both keys until the LED on the cloner remote flashes twice, then three times, and finally remains steadily lit. This indicates successful cloning.
- If the cloning process does not proceed beyond two blinks, it suggests the signal is not being received effectively. Slowly adjust the position of the cloner remote relative to the original remote (up, down, side-to-side) until the signal is successfully transmitted.
- Avoid interference during the copying process. If copying is unsuccessful, clear the code again and repeat the programming steps.
- Repeat these steps for any additional buttons you wish to program. Each button operates independently.
Image: Visual instructions for clearing and cloning codes on the DieseRC remote control.
Video: A demonstration of how to copy a remote control, showing the process of clearing existing codes and then cloning a new code from an original remote.
Operating Instructions
Once programmed, simply press the corresponding button (A, B, C, or D) on the DieseRC cloner remote to activate the linked device. The strong RF signal can pass through walls, floors, doors, and boards, allowing control within a 50-meter range in open areas.
This remote control is suitable for a wide range of applications, including garage doors, electric doors, shutter doors, expansion doors, electric curtains, fans, lamps, lighting, and ventilation devices.
Image: A hand holding the DieseRC remote control, with a garage door opening in the background, illustrating its use for garage door operation.
Image: A circular diagram showing the diverse applications of the remote control, including garage doors, gates, and other automated systems.
Maintenance
To ensure optimal performance and longevity of your DieseRC remote control, consider the following maintenance tips:
- Battery Replacement: The remote uses two CR2016 batteries. If the remote's range decreases or the LED indicator becomes dim, it may be time to replace the batteries. Open the remote casing carefully to access and replace the batteries, ensuring correct polarity.
- Cleaning: Wipe the remote with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Storage: Store the remote in a dry place, away from extreme temperatures and direct sunlight.
- Protection: Avoid dropping the remote or exposing it to water, as this can damage internal components.
Troubleshooting
If you encounter issues with your DieseRC remote control, refer to the following common problems and solutions:
- Remote not cloning:
- Ensure the original remote is a fixed code remote and operates at 433.92MHz.
- Verify the original remote is functioning correctly.
- Make sure the cloner remote has been reset before attempting to clone.
- Ensure direct contact or very close proximity between the original and cloner remotes during programming.
- Adjust the position of the cloner remote slowly relative to the original if the LED only blinks twice.
- Minimize environmental interference during the cloning process.
- Cloned remote has short range or intermittent operation:
- Check and replace the batteries in the cloner remote.
- Ensure there are no significant obstructions between the remote and the receiver.
- Re-clone the code, ensuring a strong signal during the programming process.
- Remote not responding after cloning:
- Confirm that the device you are trying to control is compatible with fixed code 433.92MHz signals.
- Repeat the cloning process to ensure the code was transferred correctly.
Specifications
| Feature | Specification |
|---|---|
| Brand | DieseRC |
| Model Name | DieseRC 433.92Mhz Fixed Code Clone Remote Control |
| Model Number | 4f6eeb2a-2bab-42dd-a135-5b57eeea9459 |
| Color | KT16C |
| RF Frequency | 433.92MHz |
| Number of Buttons | 4 |
| Transmitter Range | Over 50 meters (open space) |
| Battery Type | 2x CR2016 (included) |
| Compatible Devices | Fixed code remote controls for garage doors, electric doors, shutter doors, expansion doors, electric curtains, fans, lamps, lighting, ventilation devices. |
| Compatible Chip Codes | 2260, 2262, 1527 (EV1527, HS1527, HX1527, SC1527, GP1527, CP1527, AD1527, SCL1527, TL1527, ZX1527), PT2264, PT2240 (LX2240, LX2241, SCL2240), CS5211, SMC918, AX5026, SMC926, AX5326-3, AX5326-4, FP527, HT600, HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F630, ULN2003 |
Warranty Information
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the product packaging or contact DieseRC customer support for specific warranty terms and conditions. Keep your purchase receipt as proof of purchase.
Customer Support
For any questions, technical assistance, or support regarding your DieseRC 433.92MHz Fixed Code Clone Remote Control, please contact DieseRC customer service. You can typically find contact information on the product packaging, the official DieseRC website, or through your retailer.