Safety Information
WARNING: Maximum weight capacity 350 lbs. Securely anchor hammock to stable supports. Be aware of your surroundings and potential hazards when using indoors or outdoors.
Always ensure the stand is placed on a flat, stable surface. Regularly inspect all components for wear or damage before each use. Do not exceed the maximum weight capacity. Keep children and pets supervised when near the hammock chair.
Product Overview
The TOREVSIOR Hammock Chair with Stand provides a comfortable and stable seating solution for both indoor and outdoor environments. Its unique U-type structure and double-tube design enhance stability and balance. The stand features a powder coating for weather resistance and a design that offers an unobstructed view. The included hammock chair is crafted from natural long-staple cotton, ensuring softness, durability, and comfort. An integrated side pocket offers convenient storage for personal items.
Image: The TOREVSIOR Hammock Chair with Stand, shown in a white living room setting with a person relaxing in it.
Package Contents
Please verify that all the following components are included in your package:
- Hammock Chair Stand Components (U-type base, upright poles, top connector with hook)
- Cotton Hammock Chair
- Assembly Hardware (bolts, nuts, washers, Allen wrench)
- Instruction Manual
Setup Instructions
Assembly of the TOREVSIOR Hammock Chair with Stand is designed to be straightforward and typically takes about 10 minutes. Follow these steps:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Compare them with the 'Package Contents' list to ensure everything is present.
- Assemble the Base Frame: Connect the U-shaped base sections using the provided hardware. Ensure all connections are finger-tight at this stage.
- Attach Upright Poles: Insert the two upright poles into the designated slots on the assembled base frame. Secure them with the appropriate bolts and nuts.
- Connect Top Section: Attach the top connector piece, which includes the hanging hook, to the upper ends of the upright poles. Secure firmly with hardware.
- Tighten All Connections: Once the stand structure is complete, use the included Allen wrench to fully tighten all bolts and nuts. Ensure the stand is stable and does not wobble.
- Hang the Hammock Chair: Carefully hang the cotton hammock chair onto the hook at the top of the stand. Ensure it is securely fastened.
Image: Product dimensions diagram, illustrating the overall size of the assembled hammock chair and stand.
Image: Detail of the U-type bottom support structure, designed for enhanced stability.
Image: View of the top section of the stand, showing the hook where the hammock chair attaches.
Operating Instructions
To use your TOREVSIOR Hammock Chair with Stand:
- Gently sit into the hammock chair, distributing your weight evenly.
- Adjust your position for optimal comfort. The chair is designed to cradle your body.
- Utilize the integrated side pocket to store small items like your phone, a book, or a tablet.
- Enjoy the gentle swaying motion for relaxation.
Image: Detailed view of the hammock chair's fabric, densely woven ropes, and convenient side pocket.
Image: A closer look at the fabric pocket on the side of the hammock chair, ideal for holding small personal items.
Video: Official product video demonstrating the TOREVSIOR Hammock Chair with Stand in use, highlighting its features and comfort.
Maintenance
Proper maintenance ensures the longevity of your hammock chair and stand:
- Stand Care: The steel stand is powder-coated for rust resistance. Clean with a damp cloth and mild soap. Avoid abrasive cleaners. For outdoor use, consider covering the stand during prolonged periods of harsh weather to further protect the finish.
- Hammock Chair Care: The cotton hammock chair can be spot cleaned with mild detergent and water. For deeper cleaning, hand wash with cold water and air dry. Do not bleach or tumble dry.
- Regular Inspection: Periodically check all bolts and connections on the stand to ensure they remain tight. Re-tighten if necessary. Inspect the hammock fabric and ropes for any signs of wear, fraying, or damage.
- Drainage: If used outdoors, be aware that the stand's hollow tubes may accumulate water. Consider drilling small drainage holes (approx. 1/8 inch) at the lowest points of the base if water accumulation becomes an issue, as suggested by user feedback.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand feels wobbly or unstable. | Loose connections; uneven surface. | Ensure all bolts are fully tightened. Move the stand to a flat, level surface. |
| Difficulty during assembly (e.g., screws not fitting). | Misalignment of parts; manufacturing tolerance. | Ensure parts are correctly aligned before tightening. Apply gentle pressure or slightly adjust alignment. If issues persist, contact customer support. |
| Water accumulates in the stand's base when used outdoors. | Hollow frame design allows water entry. | Consider drilling small drainage holes (approx. 1/8 inch) at the lowest points of the base tubes to allow water to escape. |
| Hammock chair feels too high or difficult to get into. | Product design height. | This is a characteristic of the design. Ensure you have adequate space to safely enter and exit the chair. |
Specifications
| Feature | Detail |
|---|---|
| Brand | TOREVSIOR |
| Model Number | Hammock chair with stand-002 |
| Material (Stand) | Steel, Powder-coated |
| Material (Chair) | Natural Long-staple Cotton |
| Color | White (as per current product variant) |
| Product Dimensions (L x W) | 34"L x 34"W (Base) |
| Maximum Weight Recommendation | 350 Pounds |
| Item Weight | 8.41 Kilograms |
| Seating Capacity | 1 |
Warranty and Support
For warranty information or technical support, please refer to the documentation included with your purchase or contact TOREVSIOR customer service through the retailer where the product was purchased. Keep your purchase receipt for warranty claims.