Introduction
Thank you for choosing the Amazon Basics 4V Cordless Stick Screwdriver. This versatile tool is designed for various household tasks, offering convenience and efficiency. It comes with a comprehensive 34-piece bit set and a durable carrying case for easy storage and transport. This manual provides essential information for safe operation, maintenance, and troubleshooting.
Image: The Amazon Basics 4V Cordless Stick Screwdriver shown alongside its included carrying case, highlighting the complete package.
Safety Information
Always read and understand all safety warnings and instructions before operating this tool. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury. Keep this manual for future reference.
For detailed safety guidelines, please refer to the official Safety Information PDF provided by the manufacturer.
Components Overview
Image: An illustrative diagram pointing out key features of the screwdriver, including torque settings, LED light, USB-C charging port, and 1/4-inch quick change collet.
- Cordless Screwdriver: The main unit, powered by a built-in 2000mAh Lithium-ion battery.
- 34-Piece Bit Set: A variety of screwdriver bits for different screw types.
- Carrying Case: Durable case for organized storage of the screwdriver and bits.
- USB-C Charging Cable: For recharging the screwdriver's internal battery.
- LED Work Light: Illuminates the work surface.
- Torque Settings: Three adjustable settings for precise control.
Setup
1. Initial Charging
Before first use, fully charge the screwdriver. Connect the included USB-A to USB-C charging cable to the screwdriver's USB-C port and a compatible USB power source (not included). The battery indicator lights will show charging progress. A full charge typically takes approximately 2-3 hours.
2. Inserting and Removing Bits
The screwdriver features a 1/4-inch quick-change collet. To insert a bit, simply push it firmly into the collet until it clicks into place. To remove, pull the bit straight out. Ensure the bit is securely seated before operation.
Image: A detailed view of the screwdriver's front, showing the bit collet and control buttons.
Operating Instructions
1. Powering On/Off and Direction Control
The screwdriver is activated by pressing the forward or reverse button. The central button controls the direction of rotation:
- Press the forward arrow button to drive screws (clockwise rotation).
- Press the reverse arrow button to remove screws (counter-clockwise rotation).
- Release the button to stop the screwdriver.
2. Adjusting Torque Settings
This screwdriver offers 3 torque settings, allowing you to adjust the power output for different applications. The torque setting button is located near the end of the handle. Press the button to cycle through the settings. Higher torque is suitable for larger screws or tougher materials, while lower torque prevents overtightening or damaging delicate surfaces.
3. Using the LED Work Light
The integrated LED work light automatically illuminates the work surface when the screwdriver is in operation, providing better visibility in dimly lit areas.
Image: A person using the Amazon Basics Cordless Stick Screwdriver to install a cabinet hinge, demonstrating its practical application in tight spaces.
Maintenance
- Cleaning: Wipe the tool with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the screwdriver and bit set in the provided carrying case in a dry, cool place, away from direct sunlight and moisture.
- Battery Care: For optimal battery life, avoid fully discharging the battery frequently. Recharge the battery regularly, even if the tool is not in use for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Screwdriver does not turn on. | Battery is depleted. | Charge the battery fully using the provided USB-C cable. |
| Bit slips or does not engage screw. | Incorrect bit size or worn bit. | Ensure the correct bit size is used for the screw head. Replace worn bits. |
| Screwdriver stops during operation. | Overload protection activated. | Reduce pressure or switch to a higher torque setting if appropriate. Allow the tool to cool down. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | ASD2401-02 |
| Voltage | 4V |
| Battery Type | Built-in 2000mAh Lithium-ion |
| Max RPM | 300 rpm |
| Max Torque | Up to 22 inch-pounds |
| Torque Settings | 3 |
| Chuck Size | 1/4-inch Hex |
| Charging Port | USB-C (USB-A to USB-C cable included) |
| Item Weight | 10.6 ounces |
| Product Dimensions | 1.38 x 1.42 x 6.97 inches |
| Material | Plastic, Iron, Copper, Others |
Image: The back of the screwdriver showing the product label with model number and electrical specifications.
Warranty and Support
This product is covered by the Power Tool 5-Year Tool Warranty. For full details regarding warranty coverage, terms, and conditions, please refer to the official Warranty PDF.
For customer support or service inquiries, please visit the Amazon Basics Store or contact Amazon customer service.
