1. Introduction and Overview
The Tonton M0719HN4 is a portable 2K wireless security camera system designed for comprehensive surveillance. It features a 7-inch IPS touchscreen monitor with a built-in battery, a 4-channel NVR, and four 3MP cameras equipped with PIR sensors and floodlights. This system offers crystal-clear 2304x1296 resolution, two-way audio, and up to 100ft night vision. It supports multiple recording modes, smart motion detection, and remote viewing via the 'EseeCloud' app, with compatibility for Amazon Alexa.
2. What's in the Box
- 1x Wireless 7-inch LCD NVR with 32GB SD Card
- 2x Batteries for 7-inch Touchscreen
- 4x 3MP Cameras
- 1x 5V Power Supply for monitor
- 4x 12V 3M Long Power Supply for Cameras
- 5x Pack of Screws
- 1x Wall Sticker
- 1x User Manual
3. Setup and Installation
3.1 Initial Monitor Setup
- Install the SD Card: Locate the SD card slot on the monitor and insert the included 32GB SD card. The system supports up to 128GB.
- Charge the Monitor: Connect the 5V power adapter to the monitor to charge its pre-installed rechargeable battery. Ensure the battery switch is in the "ON" position for operation, or "OFF" for charging only.
3.2 Camera Power and Pairing
- Power On Cameras: Connect each 3MP camera to its respective 12V power adapter. The cameras require continuous power and do not have internal batteries.
- Automatic Pairing: The cameras are designed for auto-pairing with the NVR. Once powered on, they should automatically connect to the monitor.
- Manual Pairing (if needed): If a camera does not pair automatically, access the NVR's menu, navigate to "Match Code," and select "Match Code" to initiate a search for available cameras. You may need to press the reset button on the camera for about 10 seconds to put it into pairing mode.
3.3 Network Connection (for Remote Access)
For remote viewing and advanced features, connect the NVR to your home WiFi network:
- Access System Setup: On the monitor, go to the "System Setup" menu.
- Wireless Internet: Select "Wireless Internet" and enable WLAN.
- Select Network: Choose your WiFi network from the list and enter the password.
- Connect: Confirm the connection. The NVR will now be connected to the internet.
Video: This video demonstrates how to connect the 7-inch monitor to a WiFi network for internet access, including selecting the network and entering the password.
4. Operating Instructions
4.1 Live View and Display Modes
The 7-inch IPS touchscreen monitor allows for clear live viewing of all connected cameras. You can switch between single, split, or quad view modes to monitor different areas simultaneously. Tap on a camera feed to enlarge it to full screen.
4.2 Two-Way Audio
Each camera supports two-way audio, enabling real-time communication. Use the microphone icon on the monitor or the mobile app to speak, and listen through the camera's built-in speaker.
4.3 Recording Modes
The system offers flexible recording options:
- Continuous Recording: Records 24/7, overwriting older footage when the SD card is full.
- Motion Detection Recording: Records only when motion is detected, saving storage space.
- Scheduled Recording: Set specific times for recording based on your needs.
Video: This guide demonstrates how to set up various recording modes, including continuous, motion detection, and scheduled recording, and how to manage SD card overwriting.
4.4 Smart Motion Detection and Alerts
The cameras feature PIR and AI human detection to minimize false alarms. You can customize detection sensitivity and areas. Upon detection, the system can trigger an audible siren, activate floodlights, send email notifications, and push notifications to your mobile app.
4.5 Night Vision and Floodlight
The cameras offer multiple night vision modes:
- Full Color Mode: Utilizes the floodlight to provide color video at night.
- Infrared Mode: Standard black and white night vision.
- Smart Mode (Default): Automatically switches between infrared and color night vision when motion is detected.
4.6 Remote Access via Mobile App
Download the 'EseeCloud' app from your phone's app store. Scan the device QR code (found in System Info on the NVR) to add your system. This allows you to view live feeds, playback recordings, and receive alerts from anywhere.
Video: This video demonstrates the functionality of the wireless camera system, including live viewing and remote access through the mobile application.
4.7 Amazon Alexa Integration
The Tonton security cameras support Amazon Alexa. Download the 'EseeCloud' app and follow the instructions to link your device with Alexa. You can then use voice commands to view camera feeds on compatible Alexa devices.
Video: This video illustrates how to connect and use the Tonton security camera system with Amazon Alexa for voice-controlled viewing.
5. Maintenance
- SD Card Management: The system automatically overwrites the oldest video files when the 32GB SD card is full. Regularly back up important footage if needed. The system supports up to a 128GB card.
- Weatherproof Design: The cameras have an IP66 waterproof rating, making them suitable for both indoor and outdoor use in various weather conditions (-30°C to 60°C / -14°F to 140°F).
- Cleaning: Periodically clean camera lenses and the monitor screen with a soft, dry cloth to ensure optimal performance.
6. Troubleshooting
- Camera Not Connecting: Ensure cameras are powered on. Try manual pairing via the NVR's "Match Code" function. If issues persist, connect the camera directly to the router via an Ethernet cable and then attempt pairing.
- No Remote Access: Verify the NVR is connected to the internet (check WiFi status in System Setup). Ensure the 'EseeCloud' app is correctly configured with the Cloud ID and password.
- False Motion Alarms: Adjust the detection sensitivity and customize the motion detection area in the alarm settings to exclude irrelevant zones (e.g., moving trees).
- Poor Night Vision: Ensure camera lenses are clean. Check night vision mode settings (Full Color, Infrared, Smart Mode) and adjust as needed.
- Monitor Battery Life: The monitor's battery provides limited portable use. For extended operation, keep it connected to the 5V power supply.
7. Specifications
| Feature | Description |
|---|---|
| Brand | Tonton |
| Model Number | M0719HN4 |
| Connectivity Technology | Wireless |
| Video Capture Resolution | 2K, 3MP (2304x1296) |
| Special Features | Portable, Touchscreen, Spotlight, Color Night Vision, 2-Way Audio, PIR+Motion Sensor, Wi-Fi Connection, Split Screen Viewing, Expandable, Five-second Pre-record, Compatible with Alexa |
| Number of Channels | 4 (expandable) |
| Memory Storage Capacity | 32 GB (included), supports up to 128 GB |
| Power Source | Battery Powered for Monitor, 12V DC for Cameras |
| Camera Description | 2K, 3MP, Spotlight, Color Night Vision, 2-Way Audio, Metal Housing, 110° Wide-angle Lens, PIR+Motion Sensor, AI Human Detection |
| Night Vision Range | 100 Feet |
| Recording Mode | Event, Schedule |
| Waterproof Rating | IP66 |
8. Warranty and Support
Tonton provides a 1-year warranty and lifetime technical support for this product. For any inquiries or assistance, please contact Tonton customer service:
- Email: sales@tontonsecurity.com (response within 10 hours)
- WhatsApp: +86 137-2786-5870 (PST 17:00 PM-20:00 PM, 21:00 PM-01:00 AM)
Defective products will be replaced. For more information, visit the Tonton Store on Amazon.
