1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your AICase Biometric Fingerprint Storage Box. Please read this manual thoroughly before using the product to ensure proper function and security.
Image: The AICase Biometric Fingerprint Storage Box, shown in pink.
Video: An overview of the AICase Portable Cash Jewelry Security Case, highlighting its features and uses.
2. Product Features
- Quick Access: Two methods for unlocking: biometric fingerprint and a 12-digit Morse code.
- Biometric Fingerprint Technology: Fast recognition, stores up to 50 unique fingerprints.
- Rechargeable Battery: Built-in 280mAh lithium battery provides over 2000 unlocks and 180 days standby time on a full charge.
- Low Battery Reminder: Red light flashes when battery is below 10%.
- Portable Design: Compact size (9 x 5.9 x 3 inches, 2.8 lbs) for easy transport and discreet storage.
- Interior Organization: Includes a divider and detachable shelf for flexible storage of valuables.
Image: The interior of the storage box, showing its large space and customizable dividers for organizing items.
3. Package Contents
- AICase Biometric Fingerprint Storage Box
- 6.5ft Type-C Charging Cable
- User Manual
4. Specifications
| Attribute | Detail |
|---|---|
| Brand | AICase |
| Model Number | E0866 |
| Product Dimensions | 5.51"D x 8.66"W x 2.76"H |
| Lock Type | Biometric Fingerprint, Morse Code |
| Material | Silver (referring to internal components/finish) |
| Item Weight | 12.32 ounces |
| Battery | 280mAh Lithium Battery |
| Charging Port | Type-C |
5. Setup
5.1 Initial Charging
Before first use, fully charge the storage box using the provided Type-C charging cable. Connect the cable to the charging port on the box and a USB power source. The indicator light will show charging status.
Image: The side of the storage box with the charging port, illustrating its large battery capacity.
5.2 Registering Fingerprints
The box can store up to 50 fingerprints. The first two fingerprints registered are considered administrator fingerprints. If the box is in factory mode, anyone can open it. Register your fingerprints immediately upon receiving the product.
- Enter Registration Mode: Long press the fingerprint sensor until the purple light turns on, then release your finger.
- Register Fingerprint: Place your finger on the sensor. The light will flash green. Lift and place your finger repeatedly from different angles until the light turns blue, indicating successful registration.
- Add More Fingerprints: To add more fingerprints, repeat step 2. The first two registered fingerprints will be administrators.
Image: A finger being placed on the biometric sensor for fingerprint registration.
Video: Demonstrates how to set up a new fingerprint and Morse code password on the storage box.
5.3 Setting Morse Code Password
The Morse code password consists of 12 digits, using '0' (short press) and '1' (long press). The default password is '000000000001'.
- Authorize: Press an administrator fingerprint to authorize. The light will change to blue.
- Input Password: Short press the fingerprint sensor for '0' (green light) or long press for '1' (purple light). Input your desired 12-digit code.
- Confirm: After inputting 12 digits, the blue light will turn on. Input the password again to confirm. A long beep indicates success.
6. Operation
6.1 Unlocking with Fingerprint
Simply place a registered finger on the fingerprint sensor. The box will automatically open upon successful recognition.
Image: A hand unlocking the storage box with a single touch on the fingerprint sensor.
6.2 Unlocking with Morse Code
Input your 12-digit Morse code by short pressing for '0' and long pressing for '1' on the fingerprint sensor. The box will open after the correct sequence is entered.
Image: Illustrates both fingerprint and Morse code unlocking methods for the storage box.
Video: A comprehensive guide on how to use the biometric fingerprint storage box, including unlocking procedures.
6.3 Low Battery Reminder
When the battery level drops below 10%, the red indicator light will flash during unlocking attempts. Connect the box to a USB power source using the Type-C cable to charge it.
6.4 Emergency Unlock
In case of emergency or if the battery is too low to unlock, you can temporarily supply power via the USB charging port and then use your fingerprint or Morse code to unlock.
7. Maintenance
- Keep the fingerprint sensor clean and dry for optimal performance.
- Avoid exposing the box to extreme temperatures or moisture.
- Charge the battery regularly, especially if the low battery indicator flashes.
- Do not attempt to disassemble the lock mechanism or the box, as this may void the warranty and compromise security.
8. Troubleshooting
- Fingerprint not recognized: Ensure your finger is clean and dry. Try re-registering your fingerprint from different angles. If the battery is low, charge the device.
- Box does not open: Check the battery level. If low, connect to a power source. Ensure you are using a registered fingerprint or the correct Morse code.
- Indicator lights not working: The battery may be completely depleted. Connect to a power source for an extended period.
- Accidental factory reset: If the box is in factory mode, anyone can open it. Immediately re-register your fingerprints to secure the device.
9. Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact AICase customer service through your retailer. Keep your purchase receipt for warranty claims.
