Fastrack Men's Digital Watch Model 38067PP03 User Manual

1. Introduction

This manual provides detailed instructions for the Fastrack Men's Digital Watch, Model 38067PP03. Please read this manual thoroughly to understand the watch's functions and ensure proper use and maintenance. This digital watch offers a range of features including a chronograph, countdown timer, multiple alarms, and a perpetual calendar, designed for daily wear and active lifestyles.

2. Setup

2.1 Initial Time and Date Setting

Upon first use or after a battery change, you may need to set the current time and date. Refer to the watch's buttons (typically labeled MODE, LIGHT/ADJ, LAP/SPL, START, STOP, RECALL) for navigation and adjustment. The specific sequence for setting time and date involves entering a 'setting mode' by pressing and holding the 'MODE' or 'LIGHT/ADJ' button, then using other buttons to adjust values and confirm.

• Access Setting Mode: Press and hold the LIGHT/ADJ button until the display flashes, indicating adjustment mode.
• Navigate Settings: Use the MODE button to cycle through settings such as seconds, hours, minutes, year, month, and day.
• Adjust Values: Use the START or LAP/SPL buttons to increase or decrease the flashing value.
• Confirm Settings: Press the LIGHT/ADJ button again to exit setting mode and save changes.

2.2 12/24 Hour Format

The watch supports both 12-hour (with AM/PM indicator) and 24-hour time formats. This setting can usually be toggled within the time setting mode or a dedicated display mode. Consult the specific button sequence for your model to switch between formats.

2.3 Button Tone ON/OFF

The watch features an audible tone that sounds when buttons are pressed. This function can be enabled or disabled according to user preference. Typically, this setting is found within the general settings menu, accessible via the MODE button.

Figure 1: Front view of the Fastrack Men's Digital Watch, Model 38067PP03, displaying the digital time, day, and date. The watch features a gray dial, black polyurethane strap, and multiple control buttons on the sides.

3. Operating Instructions

Your Fastrack digital watch is equipped with several functions accessible via the control buttons. Familiarize yourself with the button layout and their primary functions:

• MODE: Cycles through different modes (Time, Chronograph, Timer, Alarm, Second Time Zone).
• LIGHT/ADJ: Activates the EL backlight; also used for adjusting settings in setting mode.
• START: Initiates or pauses functions like chronograph or timer.
• STOP: Stops functions like chronograph or timer.
• LAP/SPL: Records lap/split times in chronograph mode; also used for value adjustment.
• RECALL: Recalls stored data, such as lap times.

3.1 Chronograph Function

The watch features a 100-hour chronograph with memory for up to 50 laps/splits and an average lap calculation. To use:

1. Press MODE until 'CHRONO' or 'STOPWATCH' appears.
2. Press START to begin timing.
3. Press LAP/SPL to record lap/split times.
4. Press STOP to pause the chronograph. Press START again to resume.
5. Press STOP then RECALL to reset the chronograph and view recorded data.

3.2 Countdown Timer

A 24-hour countdown timer is available for various activities.

1. Press MODE until 'TIMER' appears.
2. Use LIGHT/ADJ to enter setting mode, then START or LAP/SPL to set the desired countdown duration.
3. Press START to begin the countdown. An alarm will sound when the timer reaches zero.

3.3 Alarm Functions

The watch supports 8 alarms (4 daily and 4 date-specific) with a buzzer signal output.

1. Press MODE until 'ALARM' appears.
2. Use LIGHT/ADJ to select an alarm and enter setting mode.
3. Set the alarm time and date (if applicable) using START or LAP/SPL.
4. Activate or deactivate the alarm using the designated button (often START or LAP/SPL).

3.4 Second Time Zone

This feature allows you to track a second time zone simultaneously.

1. Press MODE until 'T2' or 'DUAL TIME' appears.
2. Use LIGHT/ADJ to enter setting mode and adjust the second time zone.

3.5 Hourly Chime

The hourly chime can be set to sound a short beep every hour on the hour. This function is typically toggled ON/OFF within the time display mode or a dedicated settings menu.

3.6 Perpetual Calendar

The watch includes a perpetual calendar that automatically adjusts for different month lengths and leap years, ensuring the correct date is always displayed.

3.7 EL Light

Press the LIGHT/ADJ button to illuminate the display for easy viewing in low-light conditions. The light will typically stay on for a few seconds.

Figure 2: Back view of the Fastrack Men's Digital Watch, Model 38067PP03, showing the stainless steel case back with Fastrack branding and model number engravings. The black polyurethane strap with a buckle closure is also visible.

4. Maintenance

4.1 Cleaning Your Watch

To maintain the appearance of your watch, wipe it regularly with a soft, dry cloth. For the polyurethane strap, a damp cloth with mild soap can be used, followed by thorough drying. Avoid using harsh chemicals or abrasive materials.

4.2 Battery Information

The watch uses 1 Lithium Polymer battery, which is included. When the display becomes dim or functions become erratic, it may be time to replace the battery. Battery replacement should ideally be performed by a qualified technician to ensure proper sealing and function.

4.3 Water Resistance

While the watch is designed for daily wear and is robust, it is important to understand its water resistance capabilities. Avoid prolonged exposure to water or pressing buttons underwater unless explicitly stated for your specific model's water resistance rating. Refer to the watch's case back for any water resistance markings.

5. Troubleshooting

5.1 Display is Blank or Dim

• Cause: Low battery.
• Solution: Replace the battery.

5.2 Incorrect Time or Date

• Cause: Time/date not set correctly or reset after battery change.
• Solution: Follow the 'Initial Time and Date Setting' instructions in Section 2.1.

5.3 Alarm Not Sounding

• Cause: Alarm is deactivated or set incorrectly.
• Solution: Check alarm settings and ensure it is activated as per Section 3.3.

5.4 Buttons Not Responding

• Cause: Watch may be in a locked mode, or battery is very low.
• Solution: Try pressing all buttons to see if any respond. If not, consider battery replacement.

6. Specifications

7. Warranty and Support

7.1 Manufacturer's Warranty

This Fastrack watch is covered by a manufacturer's warranty. Please retain your proof of purchase for any warranty claims. The warranty typically covers manufacturing defects under normal use conditions. For specific terms and conditions, refer to the warranty card included with your product or contact Fastrack customer service.

7.2 Customer Support

For further assistance, technical support, or service inquiries, please contact Fastrack customer service. You can find contact information on the official Fastrack website or through the retailer where the watch was purchased.

Manufacturer: Titan Co Ltd No -03 Sipcot Industries Complex Hosur 635126