1. Product Overview
This manual provides essential information for the safe and effective use of your UpBright 2-Prong AC Power Cord. This power cord is designed to supply AC power to compatible Dewalt jobsite radios and speakers, enabling their operation from a standard wall outlet.
Compatibility:
- Dewalt DCR010 12V / 20V MAX Jobsite Bluetooth Speaker (DCR 010, DCR010-CA)
- Dewalt DCR028 DCR028B 12 V / 20 V MAX Bluetooth Cordless Jobsite Radio (DCR 028 B, DCR 028B)
Compatible Part Numbers: N560062, 5140245-35, 514024535.
Image 1: Compatible Dewalt Jobsite Radios and Speakers.
Image 2: UpBright 2-Prong AC Power Cord.
2. Setup Instructions
- Inspect the Cord: Before each use, visually inspect the power cord for any signs of damage, such as cuts, frayed wires, or bent prongs. Do not use a damaged cord.
- Identify Device Power Input: Locate the AC power input port on your Dewalt DCR010 or DCR028 series device. This port typically has a figure-8 shape.
- Connect to Device: Align the figure-8 connector end of the UpBright power cord with the power input port on your Dewalt device. Insert the connector firmly until it is fully seated.
- Connect to Power Outlet: Plug the 2-prong end of the power cord into a standard, grounded AC wall outlet. Ensure the outlet provides the correct voltage (typically 120V AC in North America) for your device.
- Verify Connection: Confirm that both ends of the power cord are securely connected. Your device should now be ready for operation.
Safety Note: Always ensure the power outlet's voltage matches the requirements of your device. Avoid overloading electrical outlets.
3. Operating Instructions
Once the UpBright 2-Prong AC Power Cord is correctly connected to your Dewalt device and a power outlet, the device will receive power. Refer to the specific instruction manual for your Dewalt DCR010 or DCR028 series device for detailed operating procedures, including power on/off, volume control, Bluetooth pairing, and radio tuning.
4. Maintenance
Proper maintenance ensures the longevity and safe operation of your power cord.
- Cleaning: Disconnect the power cord from both the device and the wall outlet before cleaning. Wipe the cord with a dry, soft cloth. Do not use liquid cleaners or immerse the cord in water.
- Storage: When not in use, coil the power cord loosely. Avoid tight coiling or kinking, which can damage the internal wires. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Regularly inspect the cord for any signs of wear, such as cracks in the insulation, exposed wires, or loose connections at the plugs. Replace the cord immediately if any damage is observed.
Image 3: Properly coiled power cord for storage.
5. Troubleshooting
If your device is not receiving power when connected with the UpBright AC Power Cord, consider the following:
- No Power to Device:
- Ensure both ends of the power cord are fully and securely plugged in.
- Try plugging the power cord into a different wall outlet to rule out an issue with the original outlet.
- Check the circuit breaker for the outlet to ensure it has not tripped.
- Inspect the power cord for any visible damage. If damaged, discontinue use and replace.
- Cord Does Not Fit:
- Verify that your device model (Dewalt DCR010, DCR028, DCR028B) is listed as compatible in the Product Overview section.
- Ensure you are attempting to connect the figure-8 end of the cord to the correct power input port on your device.
6. Specifications
| Brand | UPBRIGHT |
| Model Number | Dewalt DCR010 DCR028B Power Cord |
| Color | Black |
| Connector Gender | Male-to-Female |
| Plug Format/Type | Type A (US Standard 2-prong) |
| Number of Conductors | 2 |
| Voltage Rating (for compatible devices) | Up to 20 Volts |
| UL Listed | No |
7. Warranty Information
UpBright offers the following warranty for this product:
- Refund Period: 30 Days from the date of purchase.
- Exchange Period: 24 Months from the date of purchase.
Please retain your proof of purchase for warranty claims.
8. Customer Support
For any questions, concerns, or assistance with your UpBright 2-Prong AC Power Cord, please contact the manufacturer or your retailer. Refer to your purchase documentation for specific contact details.
