1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Fila Men's Digital Quartz Watch, Model 38-6088-104. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your watch.
The Fila 38-6088-104 features a digital movement, a rectangular black alloy case, a black dial, and a combination black silicone and black nylon strap.
2. Product Overview
Familiarize yourself with the components of your Fila Digital Watch:
Image 1: Front view of the Fila Digital Quartz Watch 38-6088-104, displaying the digital time and date on a black dial, encased in a black rectangular alloy case, with a black nylon strap.
- Display: Digital screen showing time, date, and other functions.
- Case: Rectangular black alloy case.
- Strap: Combination of black silicone and black nylon for comfort and durability.
- Buttons: Typically located on the sides of the case for mode selection, setting, and adjustment. (Specific button functions will be detailed in the 'Operating' section).
3. Setup
3.1 Initial Inspection
Upon unpacking, ensure all components are present and undamaged. The watch comes in its original packaging.
Image 2: The Fila watch packaging, a white and dark blue box with the Fila logo, designed to protect the watch during transit.
3.2 Setting Time and Date
The exact button configuration may vary slightly, but the general procedure for setting digital watches is as follows:
- Enter Setting Mode: Press the MODE button (often located on the bottom left) repeatedly until the time setting (e.g., hours or minutes flashing) is displayed.
- Select Item: Use the SET or ADJUST button (often top right or bottom right) to cycle through the items to be set (hours, minutes, year, month, day).
- Adjust Value: Use the START/STOP or LIGHT button (often top left) to increase the value of the flashing item. Hold the button to advance rapidly.
- Confirm and Exit: Once all settings are correct, press the MODE button again to exit the setting mode and return to the normal time display.
Note: Refer to the specific button labels on your watch for precise identification.
4. Operating
4.1 Display Modes
Your Fila Digital Watch typically offers several display modes:
- Time Mode: Displays the current time (hours, minutes, seconds) and often the day of the week and date. This is the default mode.
- Date Mode: Shows the current date (month, day, year). This may be integrated into the time display or accessible via a specific button press.
- Stopwatch Mode: For measuring elapsed time.
- Press MODE to navigate to Stopwatch mode.
- Press START/STOP to begin timing.
- Press START/STOP again to pause/resume.
- Press RESET (often the same as ADJUST or LIGHT in stopwatch mode) to clear the stopwatch.
- Alarm Mode: Allows you to set an audible alarm.
- Press MODE to navigate to Alarm mode.
- Use SET/ADJUST to select hours/minutes.
- Use START/STOP to change the values.
- Press MODE to confirm and exit.
4.2 Backlight Function
To illuminate the display in low-light conditions, press the LIGHT button (typically located on the top left). The backlight will remain on for a few seconds.
5. Maintenance
5.1 Cleaning Your Watch
To maintain the appearance of your watch:
- Wipe the case and strap with a soft, dry cloth.
- For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying.
- Avoid using chemical cleaners, solvents, or abrasive materials, as these can damage the watch's finish.
5.2 Battery Replacement
Your Fila Digital Watch is powered by 1 Lithium-ion battery. When the display becomes dim or the watch stops functioning, the battery may need replacement.
- Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and functionality.
- Attempting to replace the battery yourself may void the warranty or damage the watch, especially its water resistance.
6. Troubleshooting
If you encounter issues with your watch, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | Low or depleted battery. | Replace the battery (recommended by a professional). |
| Time is incorrect. | Time was not set correctly or reset. | Refer to Section 3.2 "Setting Time and Date" to reset the time. |
| Buttons are unresponsive. | Watch may be in a locked mode or internal issue. | Try pressing all buttons to see if any respond. If not, a professional inspection may be required. |
If the problem persists after attempting these solutions, please contact customer support or a qualified watch repair service.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 38-6088-104 |
| Movement Type | Digital Quartz |
| Case Material | Alloy |
| Case Color | Black |
| Dial Color | Black |
| Strap Material | Silicone and Nylon |
| Battery Type | 1 Lithium-ion (included) |
| Product Dimensions (L x W x H) | 20 x 20 x 20 cm |
| Weight | 200 grams |
| Service | Men |
8. Warranty and Support
Specific warranty details for the Fila Digital Quartz Watch Model 38-6088-104 are not provided in this manual. For warranty information, please refer to the documentation included with your purchase or contact the retailer from whom the watch was acquired.
For further assistance or technical support, please reach out to the official Fila customer service or your authorized Fila dealer.
