1. Introduction
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Jebao SW-2 Wave Maker Marine Aquarium Pump. Please read this manual thoroughly before use and retain it for future reference. Proper use ensures optimal performance and longevity of the product.
2. Product Overview
The Jebao SW-2 Wave Maker is designed to create natural wave-like water movement in marine aquariums, promoting a healthy environment for aquatic life. It features a compact design, adjustable flow, and quiet operation.
Key Features:
- Designed for 12-20 inch (30-50 cm) fish tanks.
- Adjustable flow rate from 500 to 2500 LPH (130-800 GPH).
- Magnetic bracket for secure and flexible positioning.
- Suitable for both freshwater and saltwater aquarium environments.
- Equipped with a durable ceramic shaft for extended product life.
- Engineered for super silent operation.
Components:
The package includes the SW-2 wave maker pump, a dedicated controller, power cable, and a plug adapter.
Image 2.1: The Jebao SW-2 Wave Maker pump and its controller, shown with product packaging.
Image 2.2: The SW-2 Wave Maker pump actively generating water flow in an aquarium, alongside its external controller.
3. Specifications
| Attribute | Value |
|---|---|
| Model | SW-2 |
| Power Consumption | 5W |
| Flow Rate | 500 - 2500 LPH (130 - 800 GPH) |
| Recommended Tank Size | 30-50 cm (12-20 inches) |
| Material | Ceramic shaft |
| Power Source | Corded Electric (12V DC) |
| Item Weight | 1.37 pounds |
Image 3.1: Technical diagram illustrating the dimensions and key specifications of the Jebao SW-2 Wave Maker.
4. Setup Instructions
- Unpack Components: Carefully remove the wave maker pump, controller, power cable, and plug adapter from the packaging. Inspect all components for any signs of damage.
- Position the Pump: Select a suitable location inside your aquarium. The pump should be submerged completely in water. Use the magnetic bracket to secure the pump to the aquarium glass. Position the external magnet on the outside of the glass, directly opposite the internal pump magnet. Ensure a firm grip.
- Adjust Pump Direction: The pump head can be adjusted up to 180 degrees to direct water flow as desired. Rotate the pump head to achieve optimal water circulation within your tank.
- Connect the Controller: Connect the pump's cable to the designated port on the controller.
- Connect Power: Attach the power cable to the controller, then plug the adapter into a standard electrical outlet. Ensure a drip loop is formed with the power cord to prevent water from reaching the outlet.
- Initial Start-up: Once connected, the pump will begin operation according to the default settings.
Image 4.1: Illustration demonstrating the 180-degree adjustable angle of the pump head and the secure magnetic base for aquarium attachment.
5. Operating Instructions
The SW-2 Wave Maker controller allows for customization of water flow patterns and intensity.
Controller Functions:
- MODE Button: Cycles through various wave patterns (e.g., constant flow, pulse mode, random flow). Refer to the controller's specific indicators for active mode.
- SPEED Knob: Adjusts the intensity or speed of the water flow. Turn clockwise for faster flow, counter-clockwise for slower flow.
- FEED Button: Activates a temporary pause mode (typically 10 minutes) to allow for feeding without food being immediately swept away. The pump will resume normal operation automatically after the set time.
- NIGHT Button: Engages a night mode, which may reduce flow or switch to a calmer pattern, often activated by a light sensor.
- WI-LE LOCK Button: This function is typically for wireless synchronization between multiple wave makers or to lock current settings. Consult the controller's specific manual for detailed use.
Experiment with different settings to find the ideal water movement for your aquarium inhabitants and aquascape.
6. Maintenance
Regular maintenance ensures the longevity and efficient operation of your wave maker.
- Disconnect Power: Always unplug the wave maker from the power outlet before performing any maintenance.
- Remove from Tank: Carefully detach the pump from the aquarium glass.
- Disassemble Pump: Gently twist and pull apart the pump components, including the filter cover, propeller, and spindle. Refer to the exploded view diagram for guidance.
- Clean Components: Rinse all parts under clean running water. Use a soft brush or cloth to remove any algae, detritus, or mineral deposits from the propeller, ceramic shaft, and pump housing. For stubborn deposits, a mild vinegar solution can be used, followed by thorough rinsing.
- Inspect for Wear: Check the ceramic shaft and propeller for any signs of wear, cracks, or damage. Replace if necessary.
- Reassemble: Carefully reassemble the pump components in reverse order of disassembly. Ensure all parts fit securely.
- Reinstall: Reattach the wave maker to the aquarium glass and reconnect the power.
Image 6.1: Exploded diagram showing the individual components of the Jebao SW-2 Wave Maker, including the magnet seat, spindle, propeller, and filter cover.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump not operating | No power, loose connection, obstructed impeller. | Check power supply and connections. Disconnect power, remove pump, and inspect impeller for debris. Clean thoroughly. |
| Reduced flow or weak waves | Algae buildup, mineral deposits, worn impeller. | Perform thorough cleaning of all pump components. Check impeller for wear and replace if damaged. |
| Unusual noise or vibration | Debris in impeller, improper assembly, worn ceramic shaft. | Disconnect power and clean impeller. Ensure all components are correctly reassembled. Inspect ceramic shaft for damage. |
| Pump runs in reverse intermittently | Controller malfunction or power fluctuation. | Unplug and replug the power to reset the controller. If the issue persists, contact customer support. |
If troubleshooting steps do not resolve the issue, please contact customer support.
8. Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for warranty claims.
For technical support or inquiries, please contact the manufacturer or your product supplier. Contact details are typically found on the product packaging or the retailer's website.
