syvio Robot Vacuum Cleaner Instruction Manual

1.1 Unboxing and Initial Preparation

Upon unboxing your syvio Robot Vacuum Cleaner, ensure all components are present: the robot vacuum, charging dock, power adapter, remote control, side brushes, and HEPA filter.

Image: syvio Robot Vacuum Cleaner with charging dock, remote, side brushes, and filter.

Step-by-Step Guide:

1. Install Side Brushes: Turn the robot vacuum upside down. Align the side brushes with the designated slots on the bottom of the robot and press firmly until they click into place.
2. Remove Protective Material: Locate and remove any protective strips or films from the robot's bumper, charging contacts, and dustbin area. This includes a red key inside the dustbin compartment.
3. Activate Power Switch: Open the top cover of the robot to access the main power switch. Slide the switch to the "ON" position. This switch should remain on during normal operation and charging.

1.2 Remote Control Battery Installation

If you plan to use the remote control, install two 1.5V AAA batteries (not included) into the remote control unit. Ensure correct polarity.

Image: Remote control for the syvio robot vacuum, showing various control buttons.

1.3 Charging the Robot Vacuum

Place the charging dock against a wall in an open area. Connect the power adapter to the charging dock and plug it into a power outlet. Place the robot vacuum onto the charging dock, ensuring the charging contacts align. The indicator light on the robot will show charging status. For first-time use, charge the robot for at least 4-5 hours until fully charged.

Image: syvio robot vacuum automatically returning to its charging dock.

1.4 App Connection (Tuya Smart)

To utilize smart features and remote control via your smartphone, download the