Owigift 110.31633611
Owigift Washer Water Drain Pump Instruction Manual
Model: 110.31633611 and Compatible Models
1. Introduction
This document provides essential information and instructions for the Owigift Washer Water Drain Pump. This component is designed to replace the original drain pump in various washing machine models, ensuring proper water drainage during wash and spin cycles. Please read this manual thoroughly before attempting installation or operation.
2. Package Contents
Upon opening the package, verify that all components are present and undamaged.
- 1x Washer Water Drain Pump Motor

Figure 1: Side view of the Owigift Washer Water Drain Pump. This image shows the main body of the pump with its motor housing and outlet port.
3. Compatibility
This drain pump is compatible with a range of washing machine models, including but not limited to those from Kenmore, Whirlpool, Maytag, and Crosley. Please verify your appliance's model number against the list below to ensure compatibility.
Compatible Model Numbers:
- 110.20372710
- 110.20372711
- 110.22352510
- 110.22352511
- 110.25132411
- 110.26132411
- 110.26132412
- 110.26132413
- 110.26134610
- 110.27132411
- 110.27132412
- 110.27132413
- 110.28132411
- 110.28132412
- 110.28132413
- 110.28133411
- 110.28133412
- 110.28133413
- 110.29132410
- 110.29132411
- 110.29132412
- 110.29132413
- 110.29133410
- 110.29133411
- 110.29133412
- 110.29133413
- 110.31632610
- 110.31632611
- 110.31632612
- 110.31633610
- 110.31633611
- 110.31633612
- 110.22352512
- 110.28132414
- 110.28133414

Figure 2: Angled view of the Owigift Washer Water Drain Pump, highlighting the water outlet connection.
4. Specifications
| Brand | Owigift |
| Product Type | Washer Water Drain Pump |
| Style | Drain Pump |
| Power Source | Battery Powered (Note: This specification might be a generic listing error. Washer drain pumps are typically AC powered. Refer to your appliance's wiring diagram for correct voltage.) |
| Manufacturer | Owigift |
| UPC | 718997249226 |
5. Installation
Safety First: Before beginning any installation or repair work on your washing machine, ensure the appliance is completely disconnected from its power source and water supply. Failure to do so can result in electric shock, injury, or property damage.
- Preparation: Clear the area around the washing machine to allow for easy access. You may need to drain any residual water from the washer tub before proceeding.
- Access the Pump: Depending on your washing machine model, you may need to remove the front panel, back panel, or tilt the machine to access the drain pump. Consult your specific washing machine's service manual for detailed instructions on accessing the drain pump.
- Disconnect Old Pump: Carefully disconnect the electrical wiring and hoses attached to the old drain pump. Be prepared for some water spillage. Note the orientation and connections for reassembly.
- Remove Old Pump: Unmount the old drain pump from its housing or brackets.
- Install New Pump: Mount the new Owigift drain pump in the same position as the old one. Ensure it is securely fastened.
- Connect Hoses and Wiring: Reconnect the drain hoses and electrical wiring to the new pump. Double-check all connections for tightness and proper seating to prevent leaks and ensure electrical integrity.
- Test: Before reassembling the washer panels, reconnect the power and water supply. Run a short wash cycle to check for proper drainage and any leaks.
- Reassemble: Once you confirm proper operation, reattach any panels or covers removed during installation.
Recommendation: Due to the complexity and safety considerations involved, professional installation by a qualified appliance technician is highly recommended.
6. Operation
The Owigift Washer Water Drain Pump operates automatically as part of your washing machine's cycle. Its primary function is to remove water from the wash tub during the drain and spin phases. No direct user interaction is required for the pump's operation once correctly installed.
- Ensure the washing machine is loaded correctly and the appropriate wash cycle is selected.
- The pump will activate automatically when the washing machine signals for water drainage.
- Listen for normal operating sounds. Unusual noises may indicate an issue.
7. Maintenance
Regular maintenance of your washing machine, including its drain system, can extend the life of components like the drain pump.
- Filter Cleaning: Many washing machines have a drain pump filter or coin trap. Regularly clean this filter according to your washing machine's user manual to prevent blockages that can strain the pump.
- Hose Inspection: Periodically inspect the drain hoses for kinks, cracks, or blockages. Ensure they are securely attached.
- Foreign Objects: Avoid washing items that may shed excessive lint or contain small objects (coins, buttons, etc.) that could enter the drain system and damage the pump impeller.
8. Troubleshooting
If your washing machine is experiencing drainage issues after installing the new pump, consider the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Washer not draining |
|
|
| Unusual noise during drain cycle |
|
|
| Water leaks from pump area |
|
|
If these steps do not resolve the issue, it is recommended to contact a qualified appliance repair technician.
9. Support and Contact Information
For further assistance, compatibility inquiries, or if you encounter issues not covered in this manual, please contact Owigift customer support. We aim to resolve your problem within 24 hours.
Please have your washing machine's model number and the Owigift drain pump's UPC (718997249226) ready when contacting support.