Soundcore Life P2i
Contents
Soundcore Anker Life P2i True Wireless Earbuds User Manual
Model: Life P2i
Introduction
The Soundcore Anker Life P2i True Wireless Earbuds are designed to provide an immersive audio experience with enhanced call clarity and extended battery life. Featuring 10mm drivers, these earbuds deliver impressive sound with deep bass and clear mids.
Key features include:
- Impressive Sound: 10mm drivers boost quality sound with deep bass and optimal mids.
- Clear Calls: A custom AI algorithm reduces noise, and two microphones ensure your voice is picked up clearly.
- Long-Life Battery: Enjoy 8 hours of playtime per charge, extending to 28 hours with the compact charging case. A quick 10-minute charge provides an hour of use.
- Effortless Connectivity: After initial pairing, the earbuds automatically connect to your device when the charging case is opened.
Image: Soundcore Life P2i True Wireless Earbuds with their charging case.
Setup and First Use
Charging the Earbuds and Case
Before first use, fully charge both the earbuds and the charging case. Connect the provided USB-C cable to the charging port on the case and to a power source. The LED indicators on the case will show the charging status.
Pairing with Your Device
- Ensure the charging case has sufficient power.
- Open the charging case. The earbuds will automatically enter pairing mode, indicated by a flashing LED on one of the earbuds.
- On your device (smartphone, tablet, etc.), go to Bluetooth settings.
- Select "Soundcore Life P2i" from the list of available devices.
- Once connected, the LED indicator on the earbud will turn off, and you will hear a confirmation tone.
For subsequent uses, simply open the charging case, and the earbuds will automatically connect to the last paired device.
Image: Soundcore Life P2i Earbuds resting in their charging case, ready for pairing.
Operating Instructions
Wearing the Earbuds
Choose the ear tips that provide the most secure and comfortable fit for optimal sound quality and noise isolation. Insert the earbuds into your ear canals and twist gently to secure them.
Image: Soundcore Life P2i Earbuds removed from their case, ready for use.
Controls
| Action | Left Earbud | Right Earbud |
|---|---|---|
| Play/Pause | Double Tap | Double Tap |
| Next Track | N/A | Press and Hold (2s) |
| Previous Track | Press and Hold (2s) | N/A |
| Answer/End Call | Double Tap | Double Tap |
| Reject Call | Press and Hold (2s) | Press and Hold (2s) |
| Activate Voice Assistant | Triple Tap | Triple Tap |
Note: Specific controls may vary slightly based on your device and operating system.
Maintenance and Care
- Cleaning: Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth. Do not use harsh chemicals or abrasive materials.
- Ear Tips: Remove the ear tips and clean them with mild soap and water. Ensure they are completely dry before reattaching.
- Charging Contacts: If you experience charging issues, gently clean the charging contacts on both the earbuds and the case with a cotton swab.
- Storage: When not in use, store the earbuds in their charging case to protect them from dust and damage.
- Avoid Extreme Conditions: Do not expose the earbuds to extreme temperatures, humidity, or liquids.
Troubleshooting
Earbuds Not Pairing/Connecting
- Ensure Bluetooth is enabled on your device.
- Make sure the earbuds are fully charged.
- Place the earbuds back into the charging case, close the lid, wait a few seconds, then open it again to re-enter pairing mode.
- Forget "Soundcore Life P2i" from your device's Bluetooth list and attempt to pair again.
- If issues persist, try resetting the earbuds (refer to the full user manual for specific reset instructions).
No Sound or Low Volume
- Check the volume levels on both your device and the earbuds.
- Ensure the earbuds are properly seated in your ears.
- Clean any debris from the earbud nozzles and ear tips.
One Earbud Not Working
- Place both earbuds back into the charging case and close the lid.
- Open the lid and check if both earbuds reconnect.
- Ensure both earbuds are charged.
Specifications
| Feature | Detail |
|---|---|
| Model Name | Life P2i |
| Brand | Soundcore |
| ASIN | B09ND7KKPD |
| Manufacturer | Anker |
| Date First Available | August 30, 2021 |
| Driver Size | 10mm |
| Playtime (Earbuds) | Up to 8 hours |
| Total Playtime (with Case) | Up to 28 hours |
| Quick Charge | 10 min charge = 1 hour playtime |
| Microphones | 2 (with AI noise reduction) |
Warranty and Support
For detailed warranty information and customer support, please refer to the official Soundcore website or the full user manual provided with your product.
You can also find additional support and resources via the Soundcore Brand Store on Amazon.
A PDF version of the user manual is available for download: User Manual (PDF).
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.