WTTHAI BN59-01068A Remote Control User Manual

1. Introduction

This manual provides instructions for the WTTHAI BN59-01068A replacement remote control, designed for use with various Samsung TV models. This remote offers direct functionality without complex setup procedures, allowing for immediate use upon battery installation.

Compatible Samsung TV Models include:

• LN19C450E1H, LN26C459E1H, LN32C450E1G, LN32C459E1G, LN32C459E1H
• LN37C539F1H, LN40C530F1H, LN40C539F1H, LN46C539F1H, LN52C539F1H
• LN26D463E1H, LN32D463E1H, UN26C4000PH, UN32C4000PH
• UN46C6400RH, UN40C6400RH, UN55C6400, UN55C6400RH, UN46C6400
• LN19C450E1HXZA, LN26C459, LN26C459E1HXZA, LN32C450, LN32C450E1GXZA
• LN32C450E1GXZX, LN32C450E1HXZA, LN32C459, LN32C459E1GXZA
• LN32C459E1HXZA, LN37C539, LN37C539F1HXZA, LN40C530F1HXZA
• LN40C539, LN40C539F1HXZA, LN40C539F1HXZL, LN46C539
• LN46C539F1HXZA, LN52C539F1HXZA, UN32C4000PHXZA
• UN40C6400RHXZA, UN46C6400RHXZA, UN55C6400RHXZA
• LNC450, LN22C450, LNC22C450E1HLN22C450E 1HXZA
• LN26C450, UN40C6400 LCD TV, LN26D463E1HXZA, LN32D463E1HZXA
• LN26D463, LN32D463, UN26C4000PHXZA, UN40D5500PHXZA

2. Setup

2.1 Battery Installation

The remote control requires two (2) AAA alkaline batteries (not included). Follow these steps to install them:

1. Locate the battery compartment cover on the back of the remote control.
2. Press down on the tab and slide the cover off.
3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
4. Slide the battery compartment cover back into place until it clicks securely.

Note: This remote control does not require any programming or pairing. It is ready for use immediately after battery installation.

Figure 1: Front view of the WTTHAI BN59-01068A remote control, showing all buttons.

3. Operating Instructions

Point the remote control directly at your Samsung TV. Ensure there are no obstructions between the remote and the TV's infrared receiver.

3.1 Basic Functions

• POWER: Turns the TV on or off.
• SOURCE/INPUT: Cycles through available input sources (HDMI, AV, Component, etc.).
• Number Buttons (0-9): Directly select TV channels.
• VOL (+/-): Adjusts the volume level.
• CH (Up/Down): Changes TV channels sequentially.
• MUTE: Mutes or unmutes the TV sound.
• MENU: Opens the TV's main menu.
• TOOLS: Accesses quick settings or context-sensitive options.
• INFO: Displays information about the current program or input.
• Directional Pad (Up/Down/Left/Right) & ENTER: Navigates through menus and confirms selections.
• RETURN/EXIT: Returns to the previous screen or exits the current menu.

3.2 Advanced Functions

• MEDIA.P: Accesses media playback functions.
• P.SIZE: Adjusts picture size/aspect ratio.
• MTS: Selects Multi-channel Television Sound options (e.g., Stereo, SAP).
• SLEEP: Sets a sleep timer for the TV.
• S.MODE: Selects sound modes.
• Colored Buttons (A, B, C, D): These buttons typically correspond to specific functions displayed on the TV screen, often in smart TV applications or teletext.

Figure 2: Angled view of the WTTHAI BN59-01068A remote control, highlighting its ergonomic design.

4. Maintenance

4.1 Battery Replacement

When the remote control's performance degrades or it becomes unresponsive, it is time to replace the batteries. Follow the battery installation steps outlined in Section 2.1. Always replace both batteries at the same time with new AAA alkaline batteries.

4.2 Cleaning

To clean the remote control, gently wipe its surface with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or excessive moisture, as these can damage the remote's electronics.

4.3 Storage

Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures. If the remote will not be used for an extended period, remove the batteries to prevent leakage and potential damage.

5. Troubleshooting

• Remote not responding:
  • Check if the batteries are inserted correctly with the correct polarity.
  • Replace old batteries with new AAA alkaline batteries.
  • Ensure there are no obstructions between the remote control and the TV's infrared sensor.
  • Make sure you are within the effective range of the TV's sensor.
• Specific buttons not working:
  • Clean the remote control, especially around the unresponsive buttons, as dirt or debris might be interfering.
  • If only certain buttons are affected, and battery replacement doesn't help, the remote may be faulty.

6. Specifications

7. Warranty and Support

For warranty information or technical support regarding your WTTHAI BN59-01068A remote control, please contact the retailer or manufacturer directly. Refer to your purchase documentation for specific contact details.