FIREGAS FGS-EBF23A360AC
FIREGAS 60 cm Black Recirculating Extractor Hood
Model: FGS-EBF23A360AC
Introduction
This manual provides essential information for the safe and efficient use of your FIREGAS 60 cm Black Recirculating Extractor Hood. Please read these instructions carefully before installation and operation, and retain them for future reference. This extractor hood is designed to effectively remove cooking fumes and odors, offering a clean and comfortable kitchen environment.
Image: The FIREGAS 60 cm Black Recirculating Extractor Hood, Model FGS-EBF23A360AC, shown installed above a stovetop in a kitchen setting.
Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury. Keep children away from the appliance. Ensure proper ventilation and do not operate the hood without filters. Disconnect power before cleaning or servicing. This appliance is for domestic use only.
Product Overview
The FIREGAS 60 cm Black Recirculating Extractor Hood features a compact, space-saving design suitable for various kitchen sizes. It includes a 3-speed motor, push-button controls, and an integrated LED light for improved visibility during cooking. The hood operates in recirculation mode, utilizing active carbon filters to purify air before returning it to the kitchen.
Image: A diagram illustrating the key features of the FIREGAS 60 cm extractor hood, including its dimensions, 3-speed operation, LED lighting, and carbon filter system.
Setup and Installation
The extractor hood is designed for under-cabinet mounting and comes with all necessary assembly instructions and hardware tools for easy installation. It supports both external duct ventilation and internal air recirculation. For recirculation, ensure the active carbon filter is installed.
Ventilation Modes
Your hood supports two ventilation modes:
- External Duct Ventilation: Air is extracted and expelled outside through a duct.
- Internal Air Recirculation: Air is filtered through an active carbon filter and returned to the kitchen.
Image: A visual guide demonstrating the two operational modes: external ducting and internal recirculation, with a recommended installation height of 650 mm above the cooking surface.
Dimensions and Mounting
The hood measures 59.5 cm (width) x 48 cm (depth) x 10 cm (height). A minimum distance of 650 mm and a maximum of 750 mm is recommended between the cooking surface and the bottom of the extractor hood for optimal performance and safety.
Image: Detailed dimensions of the extractor hood and the recommended mounting height range above a cooking hob.
Image: The slim design of the hood, highlighting its under-cabinet installation type, overall dimensions, and power cord specifications.
Operating Instructions
The hood is controlled via push buttons located on the front panel. It offers three power levels to adjust extraction intensity according to your cooking needs. An integrated 2W LED light illuminates the cooking area.
Controls
Use the push buttons to:
- Turn the hood ON/OFF.
- Select one of the three fan speeds (low, medium, high).
- Turn the LED light ON/OFF.
Image: A close-up view of the hood's push-button control panel, used for adjusting fan speed and lighting.
LED Lighting
The hood is equipped with an energy-efficient LED light to provide clear illumination of your cooking surface. This light is designed for no flicker and no glare, enhancing visibility.
Image: The extractor hood with its integrated LED light turned on, demonstrating its effective and comfortable illumination.
Maintenance
Regular maintenance ensures optimal performance and longevity of your extractor hood. Always disconnect the power supply before performing any maintenance.
Cleaning the Grease Filters
The hood features two washable multi-layer aluminum grease filters. These filters should be cleaned regularly (approximately every 2-4 weeks, depending on usage) to maintain effective grease capture.
- To remove, gently push the latch and pull the filter downwards.
- Clean the filters by hand with warm soapy water or in a dishwasher.
- Ensure filters are completely dry before re-installing.
Image: A step-by-step visual guide on removing, cleaning, and re-inserting the aluminum grease filters.
Replacing the Active Carbon Filter (for Recirculation Mode)
If using the hood in recirculation mode, the active carbon filter needs periodic replacement (typically every 3-6 months, depending on usage). Refer to the specific instructions provided with the carbon filter for replacement details.
Image: Illustration of the active carbon filters used for air purification in recirculation mode.
General Cleaning
Wipe the exterior surfaces of the hood with a soft cloth and mild detergent. Avoid abrasive cleaners or scouring pads that could damage the finish.
Troubleshooting
If you encounter issues with your extractor hood, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Hood does not turn on. | No power supply; power cord disconnected; fuse blown. | Check power connection; ensure plug is fully inserted; check household fuse/circuit breaker. |
| Low extraction efficiency. | Grease filters are dirty; carbon filter saturated (recirculation mode); incorrect installation height. | Clean grease filters; replace carbon filter; verify installation height (650-750 mm). |
| Excessive noise. | Loose components; fan obstruction; improper installation. | Check for loose screws or parts; ensure no objects are obstructing the fan; re-check installation. |
| LED light not working. | Light bulb faulty; electrical connection issue. | Contact customer service for bulb replacement; check electrical connections. |
If the problem persists after attempting these solutions, please contact customer service.
Specifications
Below are the technical specifications for the FIREGAS 60 cm Black Recirculating Extractor Hood, Model FGS-EBF23A360AC:
| Feature | Detail |
|---|---|
| Brand | FIREGAS |
| Model Number | FGS-EBF23A360AC |
| Dimensions (L x W x H) | 59.5 x 48 x 10 cm |
| Weight | 5.88 kg |
| Color | Black |
| Mounting Type | Under Cabinet Mount |
| Ventilation Type | Recirculating (also supports ducted) |
| Airflow Capacity | 201.55 m³/h |
| Number of Speeds | 3 |
| Control Type | Push Button |
| Noise Level | 57 Decibels |
| Light Source | LED (2W) |
| Power | 60 Watts |
| Filter Type | Multi-layer Aluminum Mesh (washable), Active Carbon Filter |
| Included Components | Assembly instructions and hardware tools |
| Country of Origin | China |
Image: A product card detailing various technical specifications and energy efficiency ratings for the extractor hood.
Warranty and Support
For any questions, technical assistance, or support regarding your FIREGAS extractor hood, please contact customer service. The product includes assembly instructions and hardware tools. Please refer to the patent number 008878524-0002 for product identification.
Manufacturer: FIREGAS
Seller: Firegas Kitchen Appliances
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.