Introduction
The TYMO Flat Iron Hair Straightener and Curler 2 in 1 is a versatile hair styling tool designed for both straightening and curling. It features rapid heating, adjustable temperature settings, and safety mechanisms for efficient and safe use across various hair types.
Image: The TYMO Flat Iron Hair Straightener and Curler, showcasing its light pink color and sleek design.
Safety Information
- Always ensure the product is unplugged when not in use or before cleaning.
- Do not use this appliance near water, such as in a bathtub, basin, or other vessel containing water.
- Keep out of reach of children.
- Check electrical compatibility before use in foreign countries. The device supports 100-240V.
- The uniquely upgraded automatic shut-off function will activate if the straightener remains non-moving for 5 minutes, enhancing safety.
- The anti-scald design helps prevent accidental burns during use.
Image: Close-up of the TYMO Flat Iron highlighting its thoughtful anti-scald design and the 5-minute auto-off feature for enhanced user safety.
Image: Display of product certifications including CE, ETL, and FC, indicating compliance with safety and quality standards.
Setup
- Unpack the TYMO Flat Iron and remove all packaging materials.
- Inspect the device for any visible damage. Do not use if damaged.
- Plug the power cord into a suitable electrical outlet (100-240V compatible).
Operating Instructions
Powering On and Temperature Adjustment
- The device features a patented gravity sensor. Simply sway the styling iron to activate it.
- The LED display will show the current temperature.
- Adjust the temperature using the controls to select from 32 heating levels, ranging from 140°F to 450°F.
- The device heats up in approximately 10 seconds due to advanced MCH heating technology.
- The iron automatically detects and calibrates the set temperature 30 times per second to maintain consistent heat and prevent hair damage.
- The temperature last memory feature will recall your last used setting.
Image: Illustration demonstrating the intelligent sway motion required to turn on the TYMO Flat Iron.
Image: Visual representation of the 32 adjustable heating modes, showing recommended temperatures for different hair types from 140°F to 450°F.
Image: A detailed temperature guide suggesting optimal heat settings for various hair types: 140°F-250°F for soft hair, 250°F-310°F for thin hair, 310°F-350°F for dyed hair, 350°F-390°F for curly hair, and 390°F-450°F for thick hair.
Image: Depiction of the TYMO Flat Iron's rapid 10-second heat-up time, powered by revolutionary MCH heating technology.
Styling Hair
- Ensure hair is clean, dry, and detangled before use.
- For straightening, take a small section of hair and place it between the 1-inch 3D floating plates.
- Smoothly glide the iron down the hair section from root to tip. The nano titanium coating ensures a single-pass smooth result without snagging.
- For curling, wrap a section of hair around the outer barrel of the iron, holding it for a few seconds before releasing.
- Repeat for all sections of hair until desired style is achieved.
Image: A section of hair being straightened with the TYMO Flat Iron, illustrating the smooth, one-pass result achieved with the nano titanium coating.
Maintenance
- Always unplug the device and allow it to cool completely before cleaning.
- Wipe the plates and exterior with a soft, damp cloth. Do not use abrasive cleaners or harsh chemicals.
- Ensure no water enters the internal components.
- Store the flat iron in a cool, dry place, away from direct sunlight and moisture.
- Do not wrap the cord around the appliance, as this can damage the cord.
Troubleshooting
If you encounter any issues with your TYMO Flat Iron, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Not properly plugged in, power outlet issue, or device not activated. | Ensure the power cord is securely plugged into a working outlet. Sway the iron to activate the patented motion sensor. |
| Device not heating up. | Temperature setting too low, or internal malfunction. | Increase the temperature setting. If the issue persists, contact customer support. |
| Automatic shut-off activates too quickly. | Device has been stationary for 5 minutes. | This is a safety feature. Sway the iron to reactivate it. |
For issues not listed here, please contact TYMO customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | HC201 |
| Product Dimensions | 11.02 x 1.18 x 1.18 inches |
| Item Weight | 13.4 ounces (approx. 0.84 lbs) |
| Plate Material | Titanium (Nano Titanium Coating) |
| Heating Technology | Advanced MCH Heating |
| Heat-up Time | Approx. 10 seconds |
| Temperature Range | 140°F to 450°F (32 adjustable levels) |
| Voltage | 100-240V (Dual Voltage) |
| Wattage | 45 watts |
| Auto Shut-off | 5 minutes of non-movement |
| Cord Type | Tangle-free swivel cord |
| Manufacturer | TYMO |
Image: Diagram highlighting key features such as Nano Titanium Coat, 110/220V Dual Voltage, 360° Swivel Cord, Anti-Scald Design, LED Display, and Blinking Light Reminder.
Image: Emphasizing the lightweight design of the TYMO Flat Iron, weighing only 0.53 lbs, making it portable and comfortable to hold.
Warranty and Support
TYMO products are designed for durability and performance. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.
For technical support, troubleshooting assistance, or inquiries regarding product protection plans, please visit the official TYMO website or contact their customer service department. You may also refer to the User Manual (PDF) or User Guide (PDF) for additional information.
