VGR Double Foil Professional Electric Shaver (Model VGR-332) Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe and effective use of your VGR Double Foil Professional Electric Shaver, Model VGR-332. Please read all instructions carefully before first use and retain this manual for future reference.

Figure 1: VGR Double Foil Professional Electric Shaver and included accessories.

2. Product Features

• Professional Electric Shaver: Designed with sharp blades, a large battery, and a powerful motor with 3 adjustable speeds. Suitable for finishing fades and removing stubble.
• Durable Motor & Compact Shaver: Features 3 adjustable speeds (6500-7500 RPM) for consistent power.
• Precision-Honed Blade: Equipped with an ultra-thin, super-smooth stainless steel net (0.02mm) for a close and clean shave.
• Rechargeable Battery: Provides 150 minutes of cordless runtime after a 2-hour recharge.
• LED Display: Alerts you to motor speed and remaining charge.

Figure 2: The shaver's LED display indicates motor speed and battery charge level.

3. Package Contents

Upon unpacking, please ensure all the following items are present:

• VGR Double Foil Professional Electric Shaver (Model VGR-332)
• Protective Cap
• USB Charging Cable
• Cleaning Brush
• Storage Pouch

4. Setup

4.1 Initial Charging

Before first use, fully charge the shaver. Connect the USB charging cable to the shaver's charging port and to a suitable USB power source (e.g., adapter, power bank, PC). The LED display will indicate charging status. A full charge takes approximately 2 hours and provides up to 150 minutes of cordless operation.

Figure 3: USB charging connection and battery life details.

4.2 Attaching/Removing Cutter Heads

To attach or remove the cutter head, gently press the release button (if applicable) or follow the specific instructions for your model to detach the foil assembly. Ensure it clicks securely into place when reattaching.

Figure 4: Details of the cutter head, showing the release mechanism and internal blades.

5. Operating Instructions

5.1 Power On/Off and Speed Adjustment

Press the power button to turn the shaver on or off. Use the '+' and '-' buttons to adjust between the three available speeds (6500-7500 RPM) to suit your shaving needs.

5.2 Shaving Techniques

For optimal results, hold the shaver at a right angle to your skin and move it against the direction of hair growth. Apply gentle pressure. The shaver is suitable for both dry and wet shaving.

Figure 5: The VGR shaver supports both dry and wet shaving methods.

5.3 Using the Pop-Up Trimmer

The integrated pop-up trimmer is ideal for shaping sideburns or trimming longer hairs before shaving. Slide the trimmer switch upwards to engage the trimmer.

Figure 6: The pop-up trimmer for precise detailing and different foil nets for specific uses.

5.4 Versatile Usage

The VGR-332 is designed for multiple uses, including head shaving, foil shaving for facial hair, and beard trimming.

Figure 7: Demonstrating the 3-in-1 uses of the VGR shaver: hair, foil, and beard trimming.

5.5 Demonstration Video

6. Maintenance

6.1 Cleaning the Shaver

Regular cleaning ensures optimal performance and hygiene. After each use, turn off the shaver and remove the foil head. Use the provided cleaning brush to remove any trapped hairs from the blades and foil. The shaver head can be rinsed under running water for thorough cleaning. Ensure the shaver is completely dry before reassembling or storing.

6.2 Blade and Foil Care

To maintain the sharpness and effectiveness of the blades and foil, avoid dropping the shaver or applying excessive pressure during use. Replace the foil and cutter block when they show signs of wear or reduced performance.

7. Troubleshooting

• Shaver not turning on: Ensure the battery is charged. Connect the shaver to a power source and allow it to charge for at least 30 minutes before attempting to power it on again.
• Reduced shaving performance: Clean the shaver head thoroughly. Remove trapped hairs and rinse the foil. If performance does not improve, the blades or foil may need replacement.
• Skin irritation: Ensure your skin is clean and dry (for dry shaving) or properly lubricated with shaving cream (for wet shaving). Shave against the direction of hair growth with gentle pressure. If irritation persists, consult a dermatologist.
• Unusual noise: Check if the cutter head is properly attached and free from debris. If the noise persists, contact customer support.

8. Specifications

9. Safety Information

For safe and optimal use, please observe the following:

• Be cautious of potential cuts from the sharp blades.
• Ensure proper cleaning and care to avoid skin irritation and bacterial growth.
• Follow guidelines for using the shaver near water or while charging the device.
• This product is intended for personal grooming only.
• Keep out of reach of children.
• Do not disassemble or attempt to repair the device yourself. Contact qualified personnel for service.

10. Warranty and Support

VGR products are manufactured to high-quality standards. For any issues or inquiries regarding your VGR Double Foil Professional Electric Shaver, please refer to the warranty information provided with your purchase or contact VGR customer support.

For further assistance, please visit the official VGR website or contact their customer service department.