iRest SL-A710 4D Massage Chair Instruction Manual

Introduction

This manual provides detailed instructions for the safe and effective operation of your iRest SL-A710 4D Massage Chair. Please read all instructions carefully before use and retain this manual for future reference. The iRest SL-A710 features advanced 4D technology, Zero Gravity positioning, an SL Track design, automatic footrest detection and extension, full-body heating therapy, calf roller kneading, foot roller scraping massage, and three control methods: AI voice control, TFT touch screen, and quick button access.

Figure 1: The iRest SL-A710 4D Massage Chair in a home environment.

Setup and Installation

The iRest SL-A710 massage chair requires assembly. Follow these steps carefully for proper installation. For a visual guide, please refer to the installation video below.

1. Unboxing: Carefully remove all components from the packaging. Ensure all parts listed in the packing list are present.
2. Power Connection: Plug the power cord into the chair's power inlet and then into a suitable wall outlet. Turn on the main power switch located near the power inlet.
3. Touch Screen Connection: Align the groove of the touch screen cable terminal and connect it securely to the main unit.
4. Armrest Installation:
   • Connect the air hoses and plug the wires together. Ensure terminals of the same color are connected.
   • Use the provided cloth to cover the connected wires and hoses.
   • Buckle the black metal hook on the front of the armrest into the groove of the seat frame.
   • Insert the two plastic blocks at the rear of the armrest into the white groove on the seat frame.
   • Tap the armrest firmly to ensure it is securely embedded in the seat frame.
   • Fasten the armrest with the provided M6*16 screws.
   • Snap the cover into the armrest hole to conceal the screw.
   • Repeat for the other armrest.
5. Shoulder Airbag Adjustment: Unzip the shoulder airbag on each side. Fix the M6*16 screw into the hole and then zip it back.
6. Footrest Installation:
   • Remove the ties and protective covers on both sides of the footrest connection points.
   • Remove the sleeves on both sides and install them on the support frame of the footrest.
   • Connect the air hose and plug the wires together, ensuring they are tucked inside the chair as much as possible.
   • Put down the cover and fix it with screws.
   • Fix firmly the protective cover on each side of the support base.
7. Touch Screen Support Installation: Insert the base of the touch screen support into the designated hole on the armrest. Fix it with three M4*10 screws. Put the cover and buckle it.
8. Touch Screen Attachment: Install the touch screen onto its support.

Operating Instructions

Your iRest SL-A710 massage chair offers a variety of features and control options for a personalized massage experience.

1. Starting a Massage

• Press the power button on the touch screen to start the massage.
• The chair will perform an Automatic Body Scan to detect your weight, height, and shoulder width to customize the massage.
• The Automatic Calfrest Extension will adjust the footrest length according to your leg length.

2. Automatic Massage Programs (23 Auto Modes)

The chair offers 23 automatic massage programs categorized under VIP, Healthcare, Special, and Relaxation. Select your desired program from the touch screen interface.

3. Intelligent Voice Control

Control your massage chair hands-free using voice commands. Simply say "Hi Alice" to activate the voice assistant, then issue commands like "Massage on" or "Spine Massage."

4. Manual Customization

Access the manual mode on the touch screen to customize various aspects of your massage:

• Massage Techniques: Choose from Kneading, Tapping, Shiatsu, 4D, Grasping, and more.
• Adjust Massage Speed & Width: Fine-tune the speed and width of the massage rollers.
• Adjust Massage Intensity: Use the 4D intensity knob key on the armrest to increase or decrease the massage intensity.
• Adjust Air Pressure: Control upper body and lower body airbag pressure.
• Adjust Foot Rollers & Calf Kneading: Turn these functions on/off and adjust their intensity.
• Customize Massage Area: Select full, partial, upper back, lower back, or spot massage.
• Negative Oxygen Ion: Activate this function for a refreshing experience.
• Heating Function: Turn on/off heating for the shawls and toe areas.
• Adjust Massage Duration: Set the massage timer in 5-minute increments, up to 40 minutes.

5. Angle Adjustment

Access the angle adjustment interface to control the chair's recline and footrest positions:

• Adjust Calfrest Extension: Extend or shorten the footrest to your preferred length.
• Adjust the Calfrest Angle Independently: Raise or lower the calf unit independently of the backrest.
• Adjust the Backrest & Calfrest Angle Together: Synchronize the movement of the backrest and calfrest.
• Zero Gravity Position: Activate the zero gravity recline for a weightless massage experience.

6. Program Memory Function

Save your customized massage settings (techniques, air pressure, angle, etc.) for future use.

7. Additional Features

• Bluetooth Speaker Function: Connect your mobile phone or tablet via Bluetooth to enjoy music during your massage.
• Wireless Mobile Phone Charger: Place your compatible smartphone on the designated area for convenient wireless charging.
• Space Saving: The chair is designed to recline with minimal space required from the wall.

Maintenance

To ensure the longevity and optimal performance of your iRest SL-A710 massage chair, follow these simple maintenance guidelines:

• Cleaning: Wipe clean with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
• Storage: When not in use for extended periods, store the chair in a cool, dry place away from direct sunlight.
• Inspection: Periodically check all connections and moving parts for any signs of wear or damage.

Troubleshooting

If you encounter any issues with your iRest SL-A710 massage chair, please refer to the following common troubleshooting tips:

• Chair not powering on: Ensure the power cord is securely plugged into both the chair and the wall outlet, and the main power switch is in the 'ON' position. Check the circuit breaker if necessary.
• Massage rollers not moving: Verify that a massage program is selected and the chair has completed its body scan.
• Voice control not responding: Ensure the chair's voice control feature is active and speak clearly. Check for any background noise interference.
• Bluetooth not connecting: Make sure Bluetooth is enabled on your device and the chair, and that your device is within range.

If the problem persists, please contact customer support.

Specifications

Figure 2: Product dimensions in recline and upright status.

Warranty and Support

Please read the instruction manual carefully before using the product. For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official iRest website. Keep your purchase receipt as proof of purchase for any warranty claims.