1. Introduction and Overview
The N-Gear DISCO410 is a compact and versatile Bluetooth speaker designed for karaoke and party environments. It integrates a disco light, microphone input, and a power bank function, making it suitable for various entertainment needs. This manual provides detailed instructions for setting up, operating, and maintaining your DISCO410 speaker.
Image: The N-Gear DISCO410 speaker in white, showcasing its disco ball top, front speaker grille, and control knobs. The included wired microphone and remote control are also visible next to the unit.
2. Package Contents
Please check the package for the following items:
- N-Gear DISCO410 Bluetooth Speaker
- Wired Microphone
- Micro-USB Charging Cable
3. Product Features and Controls
Familiarize yourself with the various parts and controls of your DISCO410 speaker:
Image: A detailed diagram of the N-Gear DISCO410 speaker, highlighting its various components with numbered labels for easy identification and reference.
| No. | Component |
|---|---|
| 1. | RGB-LED Disco Ball |
| 2. | Micro SD Card Slot |
| 3. | AUX Input |
| 4. | Micro-USB Charging Port |
| 5. | ON / OFF Switch (Power & Light Control) |
| 6. | USB Port |
| 7. | Microphone Input |
| 8. | Microphone Volume Control |
| 9. | 4" Speaker with RGB-LED |
| 10. | Master Volume Control |
| 11. | Tweeter |
| 12. | 2 Wired Microphones (Note: Product description states "a wired microphone", diagram shows 2. Will stick to the product description for included items, but mention the diagram shows 2 for clarity.) |
Note: The product description indicates one wired microphone is included, while the diagram shows two. Please refer to your package contents for the exact number of microphones.
4. Setup
4.1 Initial Charging
Before first use, fully charge the DISCO410 speaker. Connect the supplied micro-USB cable to the Micro-USB Charging Port (4) on the speaker and the other end to a USB power adapter (not included) or a computer USB port. The charging indicator will show the charging status.
Image: A close-up view of the rear panel of the N-Gear DISCO410, showing the power switch, USB port, microphone input, and DC5V charging port.
4.2 Powering On/Off
To power on the speaker, slide the ON/OFF Switch (5) to the "ON" position. To power off, slide it to the "OFF" position. This switch also controls the disco light: "ON+LIGHT" for power with light, "OFF" for power off, and "ON NO LIGHT" for power on without light.
5. Operating Instructions
5.1 Bluetooth Pairing
- Ensure the speaker is powered on.
- Activate Bluetooth on your mobile device (smartphone, tablet, etc.).
- Search for available Bluetooth devices. The speaker will appear as "N-Gear DISCO410".
- Select "N-Gear DISCO410" to pair. A confirmation sound will indicate successful pairing.
- You can now play audio from your device through the speaker.
5.2 USB and MicroSD Playback
The DISCO410 supports MP3 playback from USB sticks (max. 64 GB) and microSD cards (max. 64 GB).
- Insert a USB stick into the USB Port (6) or a microSD card into the Micro SD Card Slot (2).
- The speaker will automatically detect and begin playing compatible audio files.
- Use the controls on the speaker or the remote control (if available) to navigate tracks and adjust volume.
5.3 Microphone Usage (Karaoke Function)
The included wired microphone allows for karaoke and announcements.
- Connect the wired microphone to the Microphone Input (7).
- Adjust the microphone volume using the Microphone Volume Control (8).
- Adjust the overall music volume using the Master Volume Control (10).
Image: A vibrant scene depicting a group of individuals, including children, joyfully singing into a microphone, illustrating the karaoke and party capabilities of the speaker.
5.4 Disco Light Function
The integrated RGB-LED Disco Ball (1) and the speaker's RGB-LEDs (9) provide dynamic lighting effects.
- To activate the disco light, ensure the ON/OFF Switch (5) is set to "ON+LIGHT".
- The lights will automatically synchronize with the music playback.
- To turn off the lights while keeping the speaker on, set the switch to "ON NO LIGHT".
Image: The N-Gear DISCO410 speaker illuminated in a dark room, showcasing the colorful light patterns projected by its disco ball and the glowing LED ring around the speaker cone.
5.5 Power Bank Function
The DISCO410 can be used as a power bank to charge other devices.
- Connect your mobile device's charging cable to the USB Port (6) on the speaker.
- Ensure the speaker is powered on.
- Your device will begin charging. Note that using the power bank function will consume the speaker's battery.
5.6 AUX Input
For devices without Bluetooth, use the AUX input.
- Connect an audio cable (not included) from your device's audio output to the AUX Input (3) on the speaker.
- The speaker will automatically switch to AUX mode or you may need to select it via the mode button (if available on remote/speaker).
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use abrasive cleaners or solvents.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use for extended periods.
- Water Exposure: This speaker is not waterproof. Avoid exposure to water or high humidity.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from speaker | Low battery; Volume too low; Incorrect input mode; Device not paired (Bluetooth) | Charge the speaker; Increase Master Volume (10); Select correct input mode (Bluetooth, USB, MicroSD, AUX); Re-pair Bluetooth device. |
| Bluetooth not connecting | Speaker not in pairing mode; Device too far; Interference; Previously connected to another device | Ensure speaker is on and in Bluetooth mode; Move device closer to speaker; Turn off other Bluetooth devices; Disconnect from previous device and try again. |
| Microphone not working | Microphone not properly connected; Microphone volume too low | Ensure microphone is fully plugged into Microphone Input (7); Increase Microphone Volume Control (8). |
| Disco light not working | Light switch setting; Speaker not powered on | Ensure ON/OFF Switch (5) is set to "ON+LIGHT"; Power on the speaker. |
| USB/MicroSD not playing | Unsupported file format; Corrupted files; Card/drive not inserted correctly; Max size exceeded | Ensure files are MP3 format; Check card/drive for corruption; Re-insert card/drive; Ensure size is within 64 GB limit. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | N-Gear |
| Model | DISCO410 |
| Product Dimensions | 18 x 18 x 20 cm |
| Item Weight | 1.79 Kilograms |
| Color | White |
| Power Output | 50 Watts |
| Connectivity | Bluetooth, USB, MicroSD, AUX |
| Supported Media | USB Stick (max. 64 GB), MicroSD Card (max. 64 GB) |
| Special Features | Disco Ball (RGB-LED), Microphone Input, Power Bank Function |
| Power Source | Battery Powered |
9. Warranty and Support
For warranty information and technical support, please refer to the warranty card included with your product or contact N-Gear customer service directly. Contact details can typically be found on the manufacturer's official website or on the product packaging.
Keep your purchase receipt as proof of purchase for any warranty claims.
