1. Introduction
This manual provides detailed instructions for the proper use and maintenance of your TELLUR VOX 60 Bluetooth Headset. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.
Image 1.1: TELLUR VOX 60 Bluetooth Headset and included car charger.
2. Package Contents
Verify that all items are present in the package:
- 1 x TELLUR VOX 60 Bluetooth Headset
- 1 x USB-C Charging Cable
- 1 x Car Charger
- 1 x User Manual (this document)
Image 2.1: Front view of the TELLUR VOX 60 packaging.
3. Device Overview
The TELLUR VOX 60 is a lightweight Bluetooth headset designed for hands-free communication. It features Bluetooth v5.2 connectivity, multipoint pairing, and a noise-cancelling microphone.
Image 3.1: Exploded view illustrating the internal components of the headset.
4. Setup
4.1. Charging the Headset
- Connect the provided USB-C charging cable to the charging port on the headset.
- Connect the other end of the USB-C cable to a USB power source (e.g., computer, wall adapter, or the included car charger).
- The LED indicator on the headset will show charging status.
- A full charge takes approximately 2 hours.
Image 4.1: Connecting the USB-C cable to the headset for charging.
4.2. Wearing the Headset
The headset features a 360° adjustable ear hook, allowing it to be worn on either the right or left ear for comfort.
- Adjust the ear hook to fit securely around your ear.
- Position the earpiece comfortably in your ear canal.
Image 4.2: Proper placement of the headset on the ear.
4.3. Pairing with a Device
The VOX 60 uses Bluetooth v5.2 for quick and easy connection.
- Ensure the headset is charged and powered off.
- Press and hold the Multi-function button until the LED indicator flashes red and blue, indicating pairing mode.
- On your smartphone, tablet, or other Bluetooth-enabled device, enable Bluetooth.
- Search for available devices and select "Tellur Vox 60" from the list.
- Once connected, the LED indicator will flash blue slowly.
Image 4.3: Initiating Bluetooth pairing with a mobile device.
4.4. Multipoint Connectivity
The headset supports connecting to two Bluetooth devices simultaneously.
- Pair the headset with the first device as described in section 4.3.
- Disable Bluetooth on the first device.
- Put the headset back into pairing mode and pair it with the second device.
- Re-enable Bluetooth on the first device. The headset should automatically connect to both devices.
Image 4.4: The headset connected to two separate mobile devices simultaneously.
5. Operating Instructions
5.1. Power On/Off
- Power On: Press and hold the Multi-function button for approximately 3 seconds.
- Power Off: Press and hold the Multi-function button for approximately 5 seconds.
5.2. Call Management
- Answer Call: Press the Multi-function button once.
- End Call: Press the Multi-function button once during a call.
- Reject Call: Press and hold the Multi-function button for 2 seconds during an incoming call.
- Redial Last Number: Double-press the Multi-function button.
5.3. Volume Control
- Use the volume buttons on the side of the headset to adjust the audio level.
5.4. Voice Assistant
Activate your device's voice assistant (Siri, Google Assistant) by pressing the Multi-function button for 2 seconds when not on a call.
5.5. Battery Status (iOS)
For iOS users, the headset provides low battery notifications directly on your device.
Image 5.1: Using the headset for hands-free communication, promoting safer driving.
6. Maintenance
6.1. Cleaning
- Wipe the headset with a soft, dry cloth.
- Do not use abrasive cleaners or solvents.
6.2. Storage
- Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
6.3. Water Resistance
The headset is water repellent. Avoid submerging it in water or exposing it to heavy rain.
7. Troubleshooting
- Headset does not power on: Ensure the headset is fully charged.
- Cannot pair with device:
- Ensure the headset is in pairing mode (flashing red and blue LED).
- Make sure Bluetooth is enabled on your device.
- Move the headset closer to your device.
- Try restarting both the headset and your device.
- Poor sound quality:
- Ensure the headset is within range of your device.
- Check for interference from other wireless devices.
- Adjust the volume on both the headset and your connected device.
- Multipoint connection issues: If one device disconnects, try re-enabling Bluetooth on that device or re-pairing if necessary.
8. Specifications
| Feature | Specification |
|---|---|
| Model Name | Vox 60 |
| Item Model Number | TLL511381 |
| Bluetooth Version | 5.2 |
| Wireless Range | Up to 10 meters |
| Frequency | 2.4GHz |
| Supported Profiles | A2DP, AVRCP, HFP |
| Microphone Sensitivity | -44dBm ±3dB |
| Speaker Rated Power | 10mW |
| Speaker Impedance | 16 Ohm |
| Talk Time | Up to 8.5 hours |
| Standby Time | Up to 130 hours |
| Charging Time | Approximately 2 hours |
| Charging Port | USB-C |
| Features | Voice alerts, iOS battery state monitor, car charger (1A) |
| Product Dimensions | 54 x 18 x 23.5mm |
| Product Weight | 11g |
| Material | Plastic |
| Water Resistance Level | Water Repellent |
9. Warranty and Support
For warranty information and technical support, please refer to the official TELLUR website or contact customer service. You can also find additional resources by scanning the QR code on the product packaging.
Image 9.1: Product packaging showing the QR code for user manuals and support. For direct access, visit tellur.com/manual-tll511381.
