OnLyee Projection Alarm Clock User Manual

1. Introduction

The OnLyee Projection Alarm Clock is a versatile digital clock designed to enhance your bedroom experience. It features an ultra-clear LED display, a 180° rotatable projector for time display on your ceiling or wall, dual alarms with snooze, adjustable brightness and volume, and a convenient USB charging port. This manual provides comprehensive instructions for setup, operation, and maintenance to ensure optimal performance of your device.

2. Package Contents

Please check the box for the following items:

• 1 x Projection Alarm Clock
• 1 x Power Adapter
• 1 x USB Charging Cable
• 2 x Black Brackets (for stable upright positioning)
• 1 x User Manual

Figure 2.1: Package contents including the alarm clock, power adapter, USB cable, and black brackets.

3. Components Overview

Familiarize yourself with the main components and controls of your Projection Alarm Clock:

Figure 3.1: Front and side view of the Projection Alarm Clock with key features labeled.

3.1 Top Panel Controls

• SET TIME: Press to enter time setting mode.
• HOUR/MIN: Adjust hour and minute during time setting.
• DIMMER: Adjust display brightness (5 levels).
• DST: Activate/deactivate Daylight Saving Time.
• SNOOZE/OK: Press for snooze function (9 minutes) or to confirm settings.
• ALARM1/ALARM2: Set or activate/deactivate Alarm 1 and Alarm 2.
• ALARM ON/PAUSE: Turn alarm on/off or pause.
• PROJECTION ON/FLIP/OFF: Control projection display (on/off, 180° flip).

3.2 Side & Rear Components

• Projection Arm: 180° rotatable arm for projecting time.
• ROTATE CLARITY (Focus Ring): Adjust projection clarity.
• USB Charging Port: For charging external devices (e.g., smartphones).
• DC IN: Power input port.
• Battery Compartment: For 2 AAA batteries (not included) for backup settings.
• VOL+/-: Adjust alarm volume.

4. Setup

4.1 Power Connection

1. Connect the provided USB Charging Cable to the DC IN port on the back of the alarm clock.
2. Plug the Power Adapter into a standard 100-240V AC power outlet.
3. The clock display will light up, indicating it is powered on.

4.2 Battery Backup Installation

For backup of your personal settings and to ensure alarms work during power outages, install 2 AAA batteries (not included) into the battery compartment on the bottom of the clock. This will save your time and alarm settings.

5. Operating Instructions

5.1 Setting Time

1. Press and hold the SET TIME button until the hour digits start flashing.
2. Press the HOUR button to adjust the hour.
3. Press the MIN button to adjust the minute.
4. Press SET TIME again to confirm and exit time setting mode.
5. To switch between 12-hour and 24-hour format, press the 12/24H button.

5.2 Setting Alarms (Dual Alarms)

The clock supports two independent alarms (ALARM1 and ALARM2).

1. Press and hold ALARM1 or ALARM2 button until the hour digits flash.
2. Press HOUR to set the desired alarm hour.
3. Press MIN to set the desired alarm minute.
4. Press ALARM1 or ALARM2 again to confirm the alarm time.
5. To activate or deactivate an alarm, short press ALARM1 or ALARM2. An alarm icon will appear/disappear on the display.

Figure 5.1: Dual alarm functionality for personalized wake-up times.

5.3 Snooze Function

When the alarm sounds, press the large SNOOZE/OK button on the top to activate snooze. The alarm will pause for 9 minutes and then sound again.

Figure 5.2: Activating the snooze function for an extra 9 minutes of sleep.

5.4 Projection Display

1. To turn the projection on/off, slide the PROJECTION ON/FLIP/OFF switch.
2. Rotate the projection arm 180° to adjust the projection angle on your ceiling or wall.
3. Adjust the ROTATE CLARITY (focus ring) on the projection arm until the image is clear. Optimal projection distance is 1.64-11.4ft (0.5-3 meters).
4. To flip the projected time 180° (useful if the projected image is upside down), press the PROJECTION ON/FLIP/OFF switch again while the projection is on.

Figure 5.3: Projecting ultra-clear time onto the ceiling or wall.

Video 5.1: Official product video demonstrating how the time is projected and can be adjusted for optimal viewing.

5.5 Display Brightness Adjustment

Press the DIMMER button repeatedly to cycle through 5 levels of display brightness, allowing you to adjust it to your comfort level.

Figure 5.4: Adjusting the 5-level brightness of the 7-inch LED screen.

5.6 Volume Adjustment

Use the VOL+/- buttons on the side of the clock to adjust the alarm volume to your preference (5 levels available).

5.7 USB Charging Port

The clock features a USB charging port on the back, allowing you to conveniently charge your mobile phone, tablet, or other electronic devices.

Figure 5.5: Utilizing the integrated USB charging port.

5.8 Daylight Saving Time (DST)

Press the DST button to activate or deactivate Daylight Saving Time. The clock will automatically adjust the time by one hour.

6. Maintenance

• Clean the clock's surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Keep the projection lens clean to ensure clear time display. Use a soft, lint-free cloth.
• Ensure the clock is placed on a stable, flat surface to prevent accidental falls.

7. Troubleshooting

8. Specifications

9. Warranty and Support

OnLyee products come with a one-year manufacturer's warranty, a 30-day money-back guarantee, and 24-hour customer response. For any inquiries or assistance, please contact OnLyee customer service.

10. Additional Resources

For a detailed PDF version of this manual, please refer to the official User Manual (PDF).