User Guide for OnLyee models including: CR1018i, Alarm Clock with USB Charger
support@onlyee.com. CR1018i. Alarm Clock with USB Charger. CREATE YOUR PERFECT SLEEP ENVIRONMENT. Http://www.onlyee.com. Made in China. Version 2.0 View
support@onlyee.com. CR1018i. Alarm Clock with USB Charger. CREATE YOUR PERFECT SLEEP ENVIRONMENT. Http://www.onlyee.com. Made in China. Version 2.0. Chapter 1 LOCATION OF CONTROLS 1 2 3 4 5 6 7 8 9 10. DIMMER. HOUR. MINUTE. TIME 12H/24H. SNOOZE. ALARM 1...
Bed Shaker Alarm Clock for Heavy Sleepers Teens, Loud Alarm Clock for Bedroom with Phone Charger,8.7'' Mirror Digital Clock Large Display, Dimming & Snooze Mode,12/24 Hour Display, Metallic Gold : Home & Kitchen
Contact our experts support@onlyee.com CR1018i Alarm Clock with USB Charger CREATE YOUR PERFECT SLEEP ENVIRONMENT Http://www.onlyee.com Made in China Version 2.0 Chapter 1 LOCATION OF CONTROLS 1 2 3 4 5 6 7 8 9 10 DIMMER HOUR MINUTE TIME 12H/24H SNOOZE ALARM 1 ALARM 2 VOLUME DST ALARM OFF 11 AM 14 12 PM 15 13 DST 16 17 18 21 19 20 BUZZ BUZZ/VIB VIB 22 23 1. Dimmer Button 4. Time Button 7. Alarm 2 Button 10. Red Indicator Light 13. DST Indicator 16. Alarm 1 Indicator 19. DC Input Port 22. BUZZ/VIB Switch 2. Hour Button 5. Snooze Button 8. Volume Button 11. AM Indicator 14. Ring Indicator 17. Alarm 2 Indicator 20. USB Output Port 23. Vibrator Jack 3. Minute Button 6. Alarm 1 Button 9. Alarm OFF Button 12. PM Indicator 15. Vibrator Indicator 18. Speaker 21. Back Up Battery - 01 - Chapter 2 POWER RESOURCES 1. Pull out of the insulator at battery compartment to activate CR2032 coin cell backup battery. NOTE: Backup battery(included) doesn't support time display but can back up time & alarm setting. 2. Connect the adapter line to DC jack , then plug into a 100~240V AC wall power outlet. Chapter 3 TIME SETTING 1. Press TIME button once, display starts flashing. 2. Press HOUR button to set the hour. press MIN button to set the minute. 3. Press TIME button or SNOOZE button to save time or wait for another 10 seconds to confirm automatically. To change 12H/24H time format Hold press TIME button to change 12H/24H time format. - 02 - Chapter 4 ALARM SETTING 1. Press ALARM 1 button, the alarm indicator 1 will light up, the display starts flickering. 2. Press HOUR button to set the hour, press MIN button to set the minute. 3. Press ALARM 1 button or SNOOZE button to save alarm time or just wait for another 10 seconds to confirm automatically. Setting ALARM 2 is the same as ALARM 1. Set Alarm Ring Volume Repeat VOLUME button to adjust the alarm ring volume for your preference. There is 7 levels, The sequence is as follows: 03-04-05-06-07-06-05-04-03-02-01-02........ Turn off Alarm When alarm goes off: 1. Press SNOOZE button to temporarily turn off alarm for 9 minutes. Alarm will ring every next 9 minutes. 2. Press ALARM OFF button to turn off alarm for 24 hours. The alarm indicator 1 or 2 is still on, which means alarm is still activated and will ring after 24 hours. - 03 - Chapter 7 DIMMER Repeat DIMMER button to adjust the brightness of display for your preference. There is 8 levels, The sequence is as follows: 04(default)-05-06-07-06-05-04-03-02-01-OFF-01-02........ When the OFF level is selected, the display will be completely turned off and the Red Indicator light will turn on. Then if any button is pressed again, the display screen will be restored to 04 default level instead of complete off state, and the Red indicator light will also be turned off. NOTE: Hold press the DIMMER button, the display will be completely turned off directly. DIMMER DIMMER HOUR MINUTE TIME 12H/24H SNOOZE ALARM 1 ALARM 2 VOLUME DST ALARM OFF hold press or repeat Red Indicator Light DIMMER HOUR MINUTE TIME 12H/24H SNOOZE ALARM 1 ALARM 2 VOLUME DST ALARM OFF - 05 - Cancel Alarm 1. Hold press ALARM OFF button to turn off alarm1 and alarm 2 permanently. And corresponding indicator 1 and 2 will turn off. 2. Hold press ALARM 1 button, just turn off alarm 1 permanently. 1 indicator will turn off. 3. Hold press ALARM 2 button, just turn off alarm 2 permanently. 2 indicator will turn off. 4. If alarm 1 goes off, then hold press ALARM OFF or ALARM 1 , just turn off alarm1 permanently. 1 indicator will turn off . 5. If alarm 2 goes off, then hold press ALARM OFF or ALARM 2 , just turn off alarm 2 permanently. 2 indicator will turn off. Chapter 5 DST Hold press VOLUME button to switch DST function. DST indicator will turn on. Hold press VOLUME button again to turn off DST function. DST indicator will turn off. Chapter 6 USB CHARGING Plug charging cable into device such as phone or tablet. Device can charge both your phone or tablet at the same time. The maximum charge current is 1 Ampere. - 04 - Chapter 8 RED INDICATOR LIGHT 1. When the alarm goes offthe Red Indicator Light will flash 2. When the brightness of dispaly is set to OFF, the Red Indicator Light will stay on Chapter 9 Vibrator Insert the vibrator plug into the vibrator jack of the machine. A. Wake up only by bed shaker BUZZ: Speaker will ring BUZZ BUZZ/VIB: Speaker will ring BUZZ/VIB VIB Vibrator will vibrate VIB: Vibrator will vibrate set alarm on -- toggle switch to VIB -- indicator will light up. B. Wake up only by buzzer sound Set alarm on -- toggle switch to BUZZ -- indicator will light up C. Wake up by both Vibrator and Buzzer sound set alarm on -- toggle switch to BUZZ/VIB -- and indicator will light up. If you do not insert the vibrator plug into the vibrator jack of the machine, no matter you slide the switch button to VIB or BUZZ/VIB, the clock will have the buzz sound when alarm goes off. - 06 -Corel PDF Engine Version 18.1.0.661 CorelDRAW X8