Anker 335 Wireless Charger Stand (A2598) Instruction Manual

Introduction

The Anker 335 Wireless Charger Stand (Model A2598) is a versatile 3-in-1 charging solution designed to power your iPhone, AirPods, and Apple Watch-compatible devices simultaneously. Its foldable design enhances portability, making it suitable for both home and travel use. This manual provides essential information for proper setup, operation, and maintenance of your charging stand.

Image: The Anker 335 Wireless Charger Stand in use, charging an iPhone, AirPods, and an Apple Watch.

What's in the Box

Verify that all components are present in your package:

• Anker 335 Wireless Charger (3-in-1 Station)
• 18W Quick Charge 3.0 Charger
• 5 ft (1.5 m) USB-A to USB-C charging cable
• Welcome Guide

Image: The Anker 335 Wireless Charger Stand, including the charging station, USB-A to USB-C cable, and 18W power adapter.

Unboxing Video

Setup Instructions

1. Prepare the Apple Watch Charging Module: The Anker 335 Wireless Charger Stand requires your original Apple Watch USB-A charging cable (1 ft / 0.3 m or 3.3 ft / 1 m, not included).
2. Open the Base: Slide open the back panel of the charging stand to reveal the cable routing slot.
3. Thread the Cable: Carefully thread your Apple Watch charging cable through the designated hole.
4. Wrap the Cable: Wrap the cable counterclockwise around the internal channels to manage excess length.
5. Plug In: Plug the USB-A end of the Apple Watch cable into the USB-A port located within the base. Ensure the Apple Watch charging puck is securely seated in its designated spot.
6. Connect Power: Connect the provided USB-A to USB-C charging cable to the Anker 335 Wireless Charger Stand and the 18W Quick Charge 3.0 Charger. Plug the adapter into a wall outlet.

Image: A visual guide demonstrating the four steps to install the Apple Watch charging cable into the stand's base.

Setup and Demo Video

Operating Instructions

To charge your devices:

• Phone Charging: Place your compatible smartphone on the adjustable charging stand. For optimal charging, ensure the phone's wireless charging coil is precisely aligned with the center of the charging surface. Phone cases should be less than 5mm thick.
• Earbuds Charging: Place your wireless charging case for earbuds (e.g., AirPods 3, AirPods Pro, AirPods 2 with wireless charging case) on the flat charging pad.
• Apple Watch Charging: Place your Apple Watch (Series 1-6) on the installed charging puck.

The stand features an adjustable surface angle of 54° or 60°, allowing you to view content on your phone while it charges.

Image: The Anker 335 Wireless Charger Stand showing a phone charging on the adjustable stand, highlighting the ability to adjust for viewing.

Product Demonstration Video

Compatibility

The Anker 335 Wireless Charger Stand is compatible with a range of devices:

• Phones:
• 10W Charging: Samsung Note10+, 10, 9; Samsung S20+, S20, S20 Ultra, S10+, S10, S10e
• 7.5W Charging: iPhone 13, 13 Pro Max, 12, 12 Pro, 12 Pro Max, 11 Pro, SE (2nd Generation), XS, XS Max, XR, X, 8, 8 Plus
• 5W Charging: Google Pixel 6 Pro / 6 / 5 / 4 / 3 / 6XL / 5XL / 4XL / 3XL (may display "Charging slowly"); LG V30, V30+, G7, V35, V40
• Wireless Earbuds: AirPods 3, AirPods Pro, AirPods 2 (with wireless charging case), and other true wireless earbuds with wireless charging cases.
• Apple Watch: Apple Watch Series 1-6 Only (Not compatible with Apple Watch Series 7, SE, or later models). Requires original USB-A Apple Watch charging cable (not included).

Image: A diagram illustrating the wide compatibility of the charging stand with various phones, wireless earbuds, and Apple Watch models.

Safety Information

The Anker 335 Wireless Charger Stand incorporates multiple safety features to protect your devices and ensure safe operation:

• Phone Battery Safety: Integrated circuits protect your phone's battery during charging.
• Radiation Shielding: Designed to minimize electromagnetic radiation.
• Foreign Object Detection (FOD): Automatically detects and prevents charging if foreign metal objects are placed on the charging surface.
• Temperature Control: Monitors and regulates the charging temperature to prevent overheating.

Image: An illustration detailing the advanced safety features including phone battery safety, radiation shielding, foreign object detection, and temperature control.

Troubleshooting

• Device Not Charging:
  • Ensure the charging stand is properly connected to the 18W Quick Charge 3.0 adapter and a functional wall outlet.
  • Verify that your device is placed centrally on the charging surface. Misalignment can prevent charging.
  • Remove any phone cases thicker than 5mm, or cases containing metal, magnets, or pop sockets, as these can interfere with wireless charging.
  • Check for foreign objects (e.g., coins, keys) between your device and the charging surface.
  • For Apple Watch, ensure your original USB-A charging cable is correctly installed and plugged into the internal USB-A port.
• Slow Charging:
  • Confirm you are using the provided 18W Quick Charge 3.0 adapter. Using a lower wattage adapter may result in slower charging speeds.
  • Ensure optimal device placement for efficient power transfer.
  • Some devices, like certain Google Pixel models, may display "Charging slowly" even when receiving standard wireless charging power.
• Flashing Indicator Light: A flashing blue light typically indicates a charging error, such as improper device placement, a foreign object detected, or an incompatible device. Re-position your device or remove any obstructions.

Specifications

Warranty and Support

The Anker 335 Wireless Charger Stand comes with an 18-month warranty. For any product inquiries, technical assistance, or warranty claims, please contact Anker's customer service. Refer to the welcome guide included in your package for specific contact details or visit the official Anker support website.