SideTrak Swivel Tablet Mount Instruction Manual

Introduction

The SideTrak Swivel Tablet Mount is designed to enhance your productivity and viewing experience by securely attaching your tablet or phone to your laptop, countertop, or other surfaces. Its patented swivel hinge allows for versatile positioning, enabling you to extend your display or mirror content with ease. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance of your device.

Image: The SideTrak Swivel Tablet Mount shown attached to a laptop, with a tablet displaying an extended desktop.

What's Included

Please ensure all components are present before proceeding with setup:

• SideTrak Swivel Tablet Mount
• Device-safe adhesive stickers
• Steel plate for laptop attachment
• Alcohol wipe

Image: A detailed diagram illustrating the various components included with the SideTrak Swivel Tablet Mount.

Setup Instructions

Attaching the Mount to Your Laptop or Surface

The SideTrak Swivel Tablet Mount uses a magnetic plate system for secure attachment.

1. Prepare the Surface: Ensure the back of your laptop screen or desired surface is clean and dry.
2. Apply Steel Plate: Peel the backing from the device-safe adhesive stickers and apply them to the steel plate. Then, firmly press the steel plate onto the desired location on your laptop or surface. Allow adhesive to set for a few minutes.
3. Attach Mount: Align the SideTrak Swivel Tablet Mount with the steel plate. The magnets will securely attach the mount to the plate.

Image: Visual guide demonstrating the three key steps for attaching the SideTrak Swivel Tablet Mount to a laptop.

Inserting Your Device (Tablet/Phone)

1. Loosen Knobs: Gently loosen the thumbscrews on the mount to widen the clamp.
2. Clean Bumpers: Use the included alcohol wipe to clean the rubber bumpers inside the clamp. This ensures a secure grip.
3. Insert Device: Carefully insert your tablet or phone into the widened clamp.
4. Tighten Knobs: Slowly tighten the thumbscrews until your device is held firmly in place. Do not overtighten.

Operating the Swivel Tablet Mount

Adjusting Viewing Angle

The SideTrak Swivel Tablet Mount features a patented hinge that allows for flexible positioning:

• 360° Vertical Swivel: Rotate your device vertically to achieve the perfect eye-level alignment.
• 270° Horizontal Rotation: Swivel your device horizontally for landscape or portrait viewing, or to share your screen with others.

Image: The SideTrak Swivel Tablet Mount in use, showcasing its ability to rotate 360 degrees for collaborative viewing.

Extending and Mirroring Display

Utilize your tablet as a secondary display for enhanced multitasking:

• Extend Display: Position your tablet next to your laptop to extend your desktop, providing more screen real estate for applications and content.
• Apple Sidecar Compatibility: If you are using an iPad, you can seamlessly integrate it with your Apple device using Sidecar to mirror or extend your display wirelessly. Refer to Apple's official documentation for Sidecar setup.

Image: A typical setup showing a laptop and a tablet connected via the SideTrak mount, used for extending the display.

Compatibility

The SideTrak Swivel Tablet Mount is designed to accommodate a wide range of devices:

• Device Types: Compatible with most phones and tablets.
• Weight Capacity: Your device must weigh less than 1.2 lbs (approximately 0.54 kg).
• Clamp Capacity: The clamp accommodates devices with a thickness between 0.25 inches and 0.5 inches.
• Note: Not compatible with SideTrak Solo series monitors.

Image: Examples of the SideTrak Swivel Tablet Mount's versatility, including use with a phone, as a standalone kickstand, and for dual-screen setups.

Care and Maintenance

To ensure the longevity and optimal performance of your SideTrak Swivel Tablet Mount, follow these care instructions:

• Cleaning: Wipe the mount with a soft, dry cloth. For stubborn marks, use a slightly damp cloth and dry immediately. Avoid abrasive cleaners or solvents.
• Storage: When not in use, store the mount in a clean, dry place away from extreme temperatures.
• Handle with Care: While durable, avoid dropping the mount or applying excessive force to the hinge mechanism.

Troubleshooting

If you encounter any issues with your SideTrak Swivel Tablet Mount, please refer to the following common solutions:

• Device Not Holding Securely:
  • Ensure the thumbscrews are tightened sufficiently.
  • Verify your device's weight is within the 1.2 lb limit.
  • Check that the rubber bumpers are clean and free of debris.
• Mount Not Attaching Firmly to Laptop:
  • Ensure the steel plate is securely attached to your laptop surface.
  • Verify the magnetic connection between the mount and the steel plate is clean and unobstructed.
• Hinge Feels Stiff or Loose:
  • The hinge is designed for smooth, controlled movement. If it feels unusually stiff, ensure no foreign objects are obstructing it. If it feels too loose, contact support.

Product Specifications

Warranty and Support

SideTrak products are designed for quality and durability. For information regarding product warranty, returns, or technical support, please visit the official SideTrak website or contact their customer service directly. Please have your model number (STTLMTBL) and purchase details ready when contacting support.

You can find more information and support resources at the SideTrak Store on Amazon.