Active Pixel 2MP 1080P Wireless 4-Channel NVR Kit User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Active Pixel 2MP 1080P Wireless 4-Channel NVR Kit. This system is designed for reliable indoor and outdoor surveillance, offering high-definition video recording and remote access capabilities. Please read this manual thoroughly before using the product to ensure proper setup and functionality.

Image 1.1: Overview of the Active Pixel NVR Kit highlighting key features such as wireless connectivity, remote access, motion detection, scheduled recording, easy DIY setup, weatherproof design, and 2-megapixel IP cameras.

2. Package Contents

Verify that all components are present in your package:

• 1x NVR (Network Video Recorder) Unit
• 4x 1080p Wireless IP Security Cameras
• 4x Power Adapters for Cameras
• 1x Power Adapter for NVR
• 1x USB Mouse
• 1x Network Cable

Note: A hard drive for video storage, an HDMI/VGA cable for monitor connection, and a monitor are not included and must be purchased separately. The NVR supports up to 4TB hard disk capacity.

3. Product Overview

3.1 NVR Unit

The Network Video Recorder (NVR) is the central unit for managing and recording video footage from your wireless cameras. It features ports for power, network, USB mouse, and video output (VGA/HDMI).

3.2 Wireless IP Cameras

The kit includes four 2MP 1080P wireless IP cameras designed for both indoor and outdoor use. They are IP66 weatherproof rated and feature infrared night vision capabilities.

Image 3.1: Detailed diagram of an Active Pixel IP Camera, showing the location of its Wi-Fi antenna, microphone, IR sensor, 2MP lens, array LEDs, white LEDs, reset button, SD card slot, and speaker.

4. Setup Guide

The Active Pixel NVR Kit is designed for easy plug-and-play installation. Follow these steps to set up your surveillance system:

1. Install Hard Drive (Optional but Recommended): If you wish to record video, install a compatible 3.5-inch SATA hard drive (up to 4TB) into the NVR unit. Refer to the NVR's internal diagram for hard drive installation instructions.
2. Connect NVR to Power: Connect the provided power adapter to the NVR unit and plug it into a power outlet.
3. Connect Cameras to Power: Connect each wireless IP camera to its respective power adapter and plug them into power outlets. The cameras will automatically pair with the NVR.
4. Connect Mouse: Plug the USB mouse into one of the USB ports on the NVR.
5. Connect Monitor: Connect a PC monitor or TV to the NVR using a VGA or HDMI cable (not included).
6. Connect NVR to Router: For remote viewing and network access, connect the NVR's WAN port to your internet router's LAN port using the provided network cable.
7. Power On: Ensure all devices are powered on. The video feed from the cameras should appear on your connected monitor.

Image 4.1: Illustration of the simple plug-and-play setup, demonstrating the wireless connection between the camera and the NVR, and the wired connections for power and display.

5. Operating Instructions

5.1 Live View and Remote Access

After initial setup, you can view live camera feeds directly on the monitor connected to the NVR. For remote viewing:

• Download the dedicated mobile application (available for iPhone and Android) from your device's app store.
• Register an account and add your NVR device by scanning the QR code displayed on the NVR's interface or by manually entering its ID.
• Once connected, you can view live feeds, access recorded footage, and receive notifications from anywhere with an internet connection (Wi-Fi, 2G/3G/4G).

5.2 Recording Modes

The NVR supports multiple recording modes to suit your surveillance needs:

• Manual Recording: Start and stop recording manually at any time.
• Motion Detection Recording: The system records only when motion is detected, saving disk space and highlighting important events.
• Scheduled Recording: Set specific times or days for continuous recording. The NVR will automatically record during these periods.

Image 5.1: Explanation of the three primary recording modes: Manual, Motion Detection, and Scheduled, detailing how each mode functions to capture video.

5.3 Motion Detection and Alerts

Configure motion detection settings via the NVR interface or mobile app. When motion is detected, the system can:

• Start recording automatically.
• Send smart notifications with images to your smartphone.

Image 5.2: A smartphone displaying a motion detection alert, indicating an object moving within the camera's view, providing enhanced security.

5.4 Playback

Access recorded footage for review:

• Local Playback: Use the NVR interface with a connected monitor and mouse to navigate and play back recordings stored on the hard drive.
• Remote Playback: Use the mobile application to access and play back recorded videos from your smartphone or tablet.

Image 5.3: A visual representation of the playback feature, showing a timeline with recorded events, allowing users to conveniently check footage at any time.

6. Key Features

• Full HD 1080P Resolution: Capture clear and sharp images with 2-megapixel cameras.
• IP66 Weatherproof: Cameras are designed to withstand outdoor conditions, suitable for both indoor and outdoor installation. Working temperature range: -0°C to 55°C.
• Infrared Night Vision: Automatic IR-cut filter provides clear visibility in low-light conditions, ensuring surveillance day and night.

Image 6.1: A comparison demonstrating the effectiveness of infrared night vision, providing clear black and white images in complete darkness.

Image 6.2: An Active Pixel IP camera shown in rainy conditions, illustrating its IP66 weatherproof rating for reliable outdoor performance.

7. Maintenance

Regular maintenance ensures optimal performance and longevity of your security system:

• Clean Camera Lenses: Periodically wipe camera lenses with a soft, damp cloth to remove dust and smudges that may affect image clarity.
• Check Connections: Ensure all power and network cables are securely connected to prevent interruptions.
• Firmware Updates: Check the manufacturer's website or mobile app for available firmware updates to enhance system stability and features.
• Hard Drive Health: If using a hard drive, monitor its health through the NVR interface and consider replacing it if errors are detected.
• Power Supply: Ensure stable power supply to both NVR and cameras. Avoid using damaged power adapters.

8. Troubleshooting

If you encounter issues with your Active Pixel NVR Kit, refer to the following common troubleshooting steps:

• No Video Display:
  • Check if the NVR and monitor are powered on.
  • Ensure the VGA/HDMI cable is securely connected between the NVR and the monitor.
  • Verify the correct input source is selected on your monitor.
• Cameras Not Showing Video:
  • Confirm that each camera is receiving power from its adapter.
  • Ensure cameras are within the wireless range of the NVR.
  • If a camera loses connection, try restarting both the camera and the NVR.
• No Remote Access:
  • Verify the NVR is connected to your router via the network cable and has internet access.
  • Check your mobile device's internet connection.
  • Ensure the mobile app is updated to the latest version.
• No Recording:
  • Confirm a hard drive is installed and properly formatted in the NVR.
  • Check recording schedules and motion detection settings.
  • Ensure the hard drive has sufficient free space.

9. Specifications

10. Warranty and Support

Your Active Pixel NVR Kit comes with a 1-year quality warranty. Active Pixel is committed to providing lifetime technical support for this product. For any technical assistance, troubleshooting, or warranty claims, please contact Active Pixel customer support through their official channels.