1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Duravit D-Neo Vanity Sink, Model 236780. Please read these instructions carefully before beginning installation or use to ensure safety and optimal performance of the product. Retain this manual for future reference.
Figure 1: Duravit D-Neo Vanity Sink, front view. This image displays the white ceramic sink with a single faucet hole and an integrated overflow.
2. Safety Information
Always observe the following safety precautions during installation and use:
- Ensure all water supply lines are shut off before beginning any plumbing work.
- Wear appropriate personal protective equipment (PPE), such as safety glasses and gloves.
- If you are unsure about any part of the installation process, consult a qualified plumber.
- Do not overtighten plumbing connections, as this can damage the ceramic or fittings.
- The sink is heavy; use proper lifting techniques or seek assistance to prevent injury.
3. Package Contents
Verify that all components are present before starting installation:
- Duravit D-Neo Vanity Sink (Model 236780)
- Mounting hardware (if included with the specific model variant)
Note: Faucet, drain assembly, and P-trap are typically sold separately.
4. Tools Required
The following tools are generally required for installation:
- Adjustable wrench
- Screwdriver set (Phillips and flathead)
- Plumber's putty or silicone sealant
- Level
- Measuring tape
- Drill (if mounting to wall studs or vanity)
5. Setup and Installation
5.1 Pre-Installation Checks
- Inspect the sink for any damage before installation. Do not install a damaged product.
- Ensure the vanity cabinet or wall mounting surface is structurally sound and level.
- Confirm that water supply lines and drain rough-ins are correctly positioned according to local plumbing codes.
5.2 Dimensions and Planning
Refer to the dimension diagrams for precise measurements to ensure proper fit and rough-in planning.
Figure 2: Side view of the Duravit D-Neo Vanity Sink with imperial dimensions, showing height, depth, and faucet hole placement.
Figure 3: Top view of the Duravit D-Neo Vanity Sink with imperial dimensions, indicating width, depth, and basin measurements.
5.3 Mounting the Sink
- For Vanity Installation: Apply a bead of silicone sealant along the top edge of the vanity cabinet where the sink will rest. Carefully lower the sink onto the vanity, aligning it properly.
- For Wall-Mounted Installation: Mark the mounting points on the wall using the sink's dimensions and a level. Drill pilot holes and secure the mounting brackets (if applicable) or bolts into wall studs or appropriate anchors. Carefully lift the sink and secure it to the wall using the provided hardware.
5.4 Faucet and Drain Installation
- Install the faucet according to the manufacturer's instructions, securing it through the pre-drilled hole in the sink.
- Install the drain assembly into the sink's drain opening, using plumber's putty or silicone sealant under the flange to create a watertight seal. Connect the P-trap to the drain assembly and the wall drain pipe.
- Connect the hot and cold water supply lines to the faucet and the corresponding shut-off valves.
5.5 Leak Testing
- Once all connections are made, slowly turn on the water supply.
- Check all connections for leaks. Tighten any leaking connections gently.
- Fill the sink with water and then drain it, observing the drain assembly and P-trap for any leaks.
6. Operating Instructions
The Duravit D-Neo Vanity Sink operates like any standard bathroom sink. Turn the faucet handles to control water flow and temperature. The integrated overflow is designed to prevent minor overfilling, but it is not a substitute for supervision.
7. Maintenance
7.1 Cleaning
To maintain the appearance and longevity of your ceramic sink:
- Clean regularly with a soft cloth and mild, non-abrasive cleaner.
- Wipe with a dry cloth after cleaning to prevent water spots and mineral buildup.
- Avoid using harsh chemicals, abrasive cleaners, scouring pads, or steel wool, as these can damage the ceramic surface.
- For stubborn stains, consult the Duravit website for specific ceramic care recommendations.
7.2 Drain Maintenance
Periodically remove and clean the drain stopper to prevent hair and debris buildup that can lead to clogs.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Leaking at connections | Loose fittings, improper sealant, damaged washer | Tighten connections, reapply plumber's putty/sealant, replace washer |
| Slow draining | Clogged drain or P-trap | Remove and clean drain stopper, clear P-trap |
| Water spots/stains | Hard water, mineral buildup | Wipe dry after each use, use a mild descaling solution if necessary |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Duravit |
| Model Number | 236780 |
| Color | White |
| Material | Ceramic |
| Product Dimensions (D x W x H) | 6.5"D x 31.5"W x 6.5"H |
| Installation Type | Undermount (also suitable for vanity top installation) |
| Shape | Rectangular |
| Item Weight | 50.8 pounds |
| Drain Type | Pop-Up (compatible) |
10. Warranty Information
Duravit products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to your D-Neo Vanity Sink, please refer to the warranty documentation included with your purchase or visit the official Duravit website. Keep your proof of purchase for warranty claims.
11. Support
For technical assistance, replacement parts, or further inquiries, please contact Duravit customer support through their official website or the contact information provided with your product documentation.
Official Duravit Website: www.duravit.us
