Introduction
This manual provides comprehensive instructions for the safe and efficient use of your Lamshaw Magnetic USB Smartwatch Charger. This charger is designed for specific smartwatch models, including Hamile, Dirrelo GT01, LETSCOM GT01 1.55", and Fitpolo GT01 smartwatches. Please read this manual thoroughly before use.
Package Contents
- Lamshaw Magnetic USB Smartwatch Charger (2 Pack - Black)
Setup
Before charging your smartwatch, ensure you have a compatible USB power source (e.g., computer USB port, USB wall adapter, power bank). The charger features a magnetic connector designed for easy attachment.
Figure 1: Close-up view of the magnetic charging connector, showing the three contact pins for secure connection to the smartwatch.
- Connect to Power: Insert the USB-A end of the charging cable into a compatible USB power source.
- Prepare Smartwatch: Ensure the back of your smartwatch, where the charging contacts are located, is clean and dry.
- Attach Charger: Align the magnetic charging connector with the charging contacts on the back of your smartwatch. The magnets will automatically snap the connector into place.
Operating (Charging Your Smartwatch)
Once the charger is properly connected to both the power source and your smartwatch, the charging process will begin automatically. The smartwatch display will typically show a charging indicator or battery percentage.
Figure 2: A smartwatch connected to the magnetic charger, displaying the current battery charge level and charging animation.
- Charging Time: A full charge typically takes approximately 2.5 hours when using a 1A output current power source.
- Safety Features: The charger includes a built-in short-circuit protection IC to prevent overvoltage and overcurrent. If a short-circuit occurs, the protection IC will automatically cut off the circuit to ensure safety.
- Monitoring: Monitor your smartwatch display to confirm charging is active and to check the battery status.
Video: Usage Method of Magnetic Smartwatch Chargers
Video 1: This video demonstrates the correct method for connecting and using the magnetic smartwatch charger.
Maintenance
- Storage: The flexible PVC cable is designed for easy rolling and convenient storage. Store the charger in a cool, dry place when not in use.
- Cleaning: Keep the magnetic contacts on both the charger and your smartwatch clean and free from dust or debris to ensure optimal connection. Use a soft, dry cloth for cleaning.
- Portability: The compact design makes it easy to carry in a bag, making it suitable for use at home, in the office, in a car, or while traveling.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Smartwatch not charging. |
|
|
| Slow charging. |
|
|
Specifications
Figure 3: Detailed diagram illustrating the construction materials and dimensions of the charging cable.
- Brand: Lamshaw
- Model Compatibility: Hamile Smartwatch, Dirrelo GT01 Smartwatch, LETSCOM GT01 1.55" Smartwatch, Fitpolo GT01 Smartwatch
- Connector Type: Magnetic (Smartwatch end), USB-A (Power source end)
- Cable Type: USB
- Cable Length: Approximately 1 meter (3.3 feet)
- Material: ABS+PC (connector housing), Flexible PVC (cable jacket), Pure Copper (probes)
- Safety Features: Built-in Short-circuit protection IC
- Color: Black
Warranty and Support
For warranty information or technical support, please refer to the seller's policy on the platform where the product was purchased or contact Lamshaw customer service directly. Keep your purchase receipt for warranty claims.