Introduction
Thank you for choosing the Lamshaw Magnetic Smartwatch Charger. This product is designed to provide a reliable and convenient charging solution for your compatible smartwatch. Featuring a magnetic connection for easy alignment and built-in safety features, this charger ensures efficient and secure power delivery. Please read this manual carefully to understand the proper use and maintenance of your new charger.
Safety Information
- Do not expose the charger to water or excessive moisture.
- Avoid extreme temperatures. Do not use or store the charger in very hot or very cold environments.
- Keep out of reach of children and pets.
- Do not disassemble, modify, or attempt to repair the charger. This may void the warranty and pose safety risks.
- Ensure the charging pins are clean and free of debris before connecting to your smartwatch.
- Unplug the charger from the power source when not in use or during electrical storms.
- Dispose of the product responsibly according to local regulations.
Product Overview
The Lamshaw Magnetic Smartwatch Charger is a compact and durable charging cable designed for specific smartwatch models. It features a USB-A connector on one end and a magnetic charging interface with two contact pins on the other.
Image: Two Lamshaw magnetic smartwatch charging cables, showing both the USB-A connector and the magnetic charging head.
Image: A detailed view of the charging cable, illustrating its construction with a Pure Copper Probe for stable conduction, durable ABS+PC material, and a flexible PVC cable for easy handling. The cable length is approximately 3.3 feet (1 meter).
Setup
Before first use, ensure your smartwatch is compatible with this charger. This charger is specifically designed for Stiive 1.28 Inch Smartwatch LCW01, Lovtutu Watch, Moowhsh Watch 1.28, NiUFFiT LW36, and ManiGoo 1.28 Watch models.
Image: Visual representation of compatible smartwatches, including the Stiive 1.28 Inch Smartwatch LCW01 and Lovtutu Smartwatch, confirming the charger's intended use.
- Unpack the charger from its packaging.
- Connect the USB-A end of the charging cable to a compatible power source such as a USB wall adapter, computer USB port, laptop USB port, or power bank.
- Ensure the power source is active and providing power.
Operating Instructions
To charge your smartwatch, follow these steps:
- With the USB end connected to a power source, bring the magnetic charging head close to the charging contacts on the back of your smartwatch.
- The magnetic connection will automatically align the charger with the smartwatch's charging pins. Ensure the pins on the charger make proper contact with the smartwatch's charging points.
- If the magnets repel, flip the charging head 180 degrees and try again. The magnetic connection should attract, not repel.
- Once connected correctly, your smartwatch should display a charging indicator (e.g., a battery icon with a lightning bolt or a percentage increase).
- Allow the smartwatch to charge until it reaches full capacity.
- Once charging is complete, gently detach the magnetic charger from your smartwatch and unplug the USB end from the power source.
Image: Demonstrates various compatible power sources for the charger, including a computer, laptop, power bank, and wall charger, highlighting the versatility of the USB-A connection.
Image: Illustrates the correct and incorrect ways to connect the magnetic charger. It shows that if the magnets repel, the device will not charge, but if they attract, charging will proceed correctly, indicated by the smartwatch's charging display.
Maintenance
- Cleaning: Use a soft, dry cloth to wipe the charger and its magnetic contacts. Do not use liquid cleaners or abrasive materials.
- Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tangling the cable.
- Inspection: Periodically inspect the cable and connectors for any signs of damage, such as fraying or bent pins. If damage is found, discontinue use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Smartwatch not charging. | Incorrect magnetic alignment. | Flip the charging head 180 degrees to ensure proper magnetic attraction. |
| Smartwatch not charging. | Loose connection to power source. | Ensure the USB-A connector is fully inserted into the power source. Try a different USB port or power adapter. |
| Smartwatch not charging. | Dirty charging contacts. | Clean the magnetic contacts on both the charger and the smartwatch with a soft, dry cloth. |
| Charging is slow. | Low power output from source. | Use a wall adapter with sufficient power output (e.g., 5V/1A). Avoid using unpowered USB hubs. |
| Charger feels warm. | Normal operation. | A slight warmth during charging is normal. If it becomes excessively hot, discontinue use and contact support. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Lamshaw |
| Connector Type | Micro USB (Magnetic) to USB-A |
| Cable Type | USB |
| Compatible Devices | Stiive 1.28 Inch Smartwatch LCW01, Lovtutu Smartwatch, Moowhsh Watch 1.28, NiUFFiT LW36, ManiGoo 1.28 Watch |
| Special Feature | Magnetic, Short-circuit protection IC |
| Cable Length | Approx. 3.3 feet (1 meter) |
| Color | Black |
| Material | ABS+PC, Flexible PVC Cable, Pure Copper Probe |
| Number of Pins | 2 (magnetic contacts) |
Warranty and Support
This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the product packaging or contact your retailer. If you encounter any issues or have questions regarding the use of your Lamshaw Magnetic Smartwatch Charger, please contact customer support through the platform where you purchased the product. Please have your order number and product details ready for faster assistance.