Heller 2000W Low Profile Fan Heater

1. Introduction

This manual provides important information for the safe and efficient operation of your Heller 2000W Low Profile Fan Heater. Please read it thoroughly before use and retain it for future reference.

The Heller 2000W Low Profile Fan Heater delivers powerful warmth in a sleek and unobtrusive design. It is perfect for use in small to medium-sized rooms, such as bedrooms, living rooms, or home offices, rapidly warming up your space for a comfortable environment during colder months.

Key Features:

• Low-profile construction ideal for discreet placement in any room.
• Multiple heat and fan speed settings for customized warmth.
• Overheat protection and tip-over safety switch.
• Silent performance suitable for bedrooms or living spaces.
• Lightweight and easy to move from room to room.

2. Safety Information

IMPORTANT SAFETY INSTRUCTIONS: Read all instructions before using this heater.

• Do not use this heater in bathrooms, laundry areas, or similar indoor locations where water may be present.
• Do not operate any heater with a damaged cord or plug, or after the heater malfunctions or has been dropped or damaged in any manner.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
• To disconnect heater, turn controls to OFF, then remove plug from outlet.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
• A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater.
• Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
• Always unplug heater when not in use.

3. Product Overview

Familiarize yourself with the components of your Heller Fan Heater.

Figure 3.1: Front view of the Heller 2000W Low Profile Fan Heater, showing the main grille and control knobs on top.

Figure 3.2: Side view of the Heller 2000W Low Profile Fan Heater, illustrating its dimensions: 28.2cm height, 21.7cm width, and 13.7cm depth.

Components:

1. Power Indicator Light
2. Thermostat Control Knob
3. Function Selector Knob (Off/Fan/Low Heat/High Heat)
4. Air Outlet Grille
5. Power Switch (On/Off)
6. Base

4. Setup

1. Unpacking: Carefully remove the heater from its packaging. Retain the packaging for storage or future transport.
2. Placement: Place the heater on a firm, level surface. Ensure there is at least 1 meter (3 feet) of clear space around the heater from walls, furniture, curtains, and other flammable materials.
3. Power Connection: Ensure the heater is switched OFF (Function Selector Knob to 'OFF' and Power Switch to 'O'). Plug the power cord into a standard 220-240V AC, 50Hz electrical outlet. Do not use extension cords or power boards.

5. Operating Instructions

1. Power On: Turn the Power Switch to the 'I' (On) position. The power indicator light will illuminate.
2. Select Function:
   • Fan Only: Turn the Function Selector Knob to the fan symbol (usually a fan blade icon). The heater will operate as a fan without heat.
   • Low Heat (1000W): Turn the Function Selector Knob to 'I' or 'Low Heat'.
   • High Heat (2000W): Turn the Function Selector Knob to 'II' or 'High Heat'.
3. Set Thermostat: Turn the Thermostat Control Knob clockwise to increase the desired temperature setting. Turn it counter-clockwise to decrease. The heater will cycle on and off to maintain the set temperature. For continuous heating, turn the thermostat to its maximum setting.
4. Power Off: To turn off the heater, first turn the Function Selector Knob to 'OFF', then turn the Power Switch to 'O'. Finally, unplug the heater from the wall outlet.

6. Maintenance

Cleaning:

• Always unplug the heater from the power outlet and allow it to cool completely before cleaning.
• Use a soft, damp cloth to wipe the exterior surfaces of the heater. Do not use abrasive cleaners or solvents.
• Use a vacuum cleaner with a brush attachment to remove dust from the air intake and outlet grilles.
• Never immerse the heater in water or any other liquid.

Storage:

• When not in use, store the heater in a cool, dry place.
• It is recommended to store the heater in its original packaging to protect it from dust and damage.
• Do not wrap the power cord tightly around the heater.

7. Troubleshooting

8. Specifications

9. Warranty and Support

This Heller product comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and coverage details.

For technical support, troubleshooting assistance, or warranty claims, please contact Heller customer service. Contact details can typically be found on the product packaging or the official Heller website.

Please have your model number (HLPFH2) and proof of purchase ready when contacting support.