DEWINNER Dining and Office Chairs (Set of 6, Blue) - Instruction Manual

1. Product Overview

Thank you for choosing DEWINNER Dining and Office Chairs. This set of 6 retro-style chairs is designed for comfort and durability, suitable for various indoor environments such as dining rooms, kitchens, living rooms, and offices. Each chair features a padded seat and robust beech wood legs.

• Dimensions: Overall Height: 83 cm, Overall Depth: 45 cm. Seat height: 39 cm, Seat width: 46 cm, Seat depth: 43 cm, Backrest height: 44 cm. Please allow for a 1-2 cm manual measurement difference.
• Comfort & Easy Cleaning: Features a thick artificial leather cushion for comfort and simple maintenance.
• Stability & Durability: Constructed with robust, shock-resistant beech wood legs, ensuring greater durability compared to standard chairs.
• Versatile Design: The simple design and arched seat shell allow these Scandinavian-style chairs to complement various room decors.

2. Assembly Instructions

The DEWINNER chairs require assembly. The process is straightforward and typically takes 5-15 minutes per chair. Please ensure all components are present before beginning assembly.

2.1. Package Contents

Before starting, verify that your package contains the following:

• Chair seats (6 units)
• Leg frames (6 sets)
• Assembly hardware (screws, washers, Allen key)
• Instruction manual

2.2. Step-by-Step Assembly

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Attach Legs to Seat: Align the leg frame with the pre-drilled holes on the underside of the chair seat. Insert the screws and washers, then tighten them using the provided Allen key. Do not overtighten initially.
3. Ensure Stability: Once all screws are in place, gently place the chair on a flat surface. Apply light pressure to ensure all legs are evenly touching the ground. Then, fully tighten all screws.
4. Repeat for Remaining Chairs: Follow the same steps for the other chairs in the set.

3. Usage and Operation

These chairs are designed for comfortable seating in various indoor settings. To ensure longevity and safety, please observe the following:

• Intended Use: Use the chairs for seating purposes only. Avoid standing on them or using them as ladders.
• Weight Capacity: While robust, avoid exceeding a reasonable weight limit to prevent damage.
• Placement: Place chairs on a flat, stable surface. Avoid placing them near heat sources or in direct prolonged sunlight to prevent material degradation.

4. Maintenance and Care

Proper care will extend the life and appearance of your DEWINNER chairs.

• Cleaning: Wipe the chair surfaces (seat and legs) with a soft, damp cloth. For stubborn stains on the artificial leather, use a mild soap solution and wipe dry immediately. Avoid abrasive cleaners or harsh chemicals.
• Wood Care: The beech wood legs can be cleaned with a damp cloth. Avoid excessive moisture. Periodically check and tighten any loose screws to maintain structural integrity.
• Protection: Use furniture pads on the bottom of the legs to protect floors and reduce noise when moving chairs.

5. Troubleshooting

If you encounter any issues with your chairs, please refer to the following common solutions:

• Wobbly Chair:
  • Ensure all assembly screws are fully tightened.
  • Check if the chair is on an even surface. Adjust floor protectors if necessary.
• Squeaking Noise:
  • Retighten all screws. Sometimes, a slight loosening can cause friction and noise.
• Scratches on Floor:
  • Ensure furniture pads are attached to the bottom of each leg. Replace worn pads as needed.

6. Product Specifications

7. Warranty and Support

DEWINNER stands by the quality of its products. For any warranty claims, missing parts, or technical support, please contact your retailer or DEWINNER customer service directly. Please retain your proof of purchase for warranty validation.

For further assistance, visit the official DEWINNER store: DEWINNER Store