Bell + Howell TacLight Lantern Portable LED Collapsible Camping & Outdoor Torch Instruction Manual

Introduction

Thank you for choosing the Bell + Howell TacLight Lantern. This portable LED lantern is designed for various outdoor and indoor lighting needs, offering bright illumination in a compact, collapsible form. Please read this manual thoroughly before using your lantern to ensure proper operation and to maximize its lifespan.

Safety Information

• Do not look directly into the LED light when illuminated, as it may cause temporary vision impairment.
• Keep the lantern away from water and excessive moisture. This product is not water resistant.
• Do not attempt to disassemble or modify the lantern. This may void the warranty and cause damage.
• Ensure batteries are inserted with correct polarity.
• Remove batteries if the lantern will not be used for an extended period to prevent leakage.
• Keep out of reach of children.

Package Contents

• Bell + Howell TacLight Lantern (Quantity as purchased)

Setup

Battery Installation

1. Locate the battery compartment cover at the bottom of the lantern.
2. Twist the cover counter-clockwise to open.
3. Insert three (3) AAA batteries (not included) into the compartment, ensuring correct polarity (+/-) as indicated inside.
4. Replace the battery compartment cover and twist clockwise to secure it.

This image displays two Bell + Howell TacLight Lanterns. On the left, the lantern is in its collapsed, compact state, showing its blue exterior and the Bell+Howell logo. On the right, the same lantern is shown in its expanded state, revealing the clear light-emitting diode (LED) panel and the metal carrying handles extended upwards. Both lanterns are blue.

Operating Instructions

Turning On/Off and Adjusting Brightness

• To turn on the lantern, gently pull the top section upwards from the base. The LED light will illuminate as it expands.
• To adjust brightness, continue to pull the top section further upwards for brighter light, or push it downwards to dim the light.
• To turn off the lantern, fully collapse the top section back into the base until it clicks into place.

Using the Carrying Handles

The lantern features two metal carrying handles. These handles can be used to carry the lantern, hang it from a hook, or place it on a flat surface for stable illumination.

Maintenance

Cleaning

Wipe the exterior of the lantern with a soft, dry cloth. Do not use abrasive cleaners or immerse the lantern in water.

Storage

Store the lantern in a cool, dry place when not in use. If storing for an extended period, remove the batteries to prevent corrosion.

Troubleshooting

Lantern Not Turning On

• Ensure batteries are inserted correctly with the proper polarity.
• Check if the batteries are fresh and fully charged. Replace if necessary.
• Confirm the lantern is fully expanded to activate the light.

Dim Light Output

• Expand the lantern fully to achieve maximum brightness.
• Replace batteries with fresh ones if the light remains dim.

Specifications

Warranty and Support

For warranty information or customer support, please refer to the product packaging or contact Bell + Howell customer service directly. Keep your purchase receipt for any warranty claims.