XSPANDER Shaver Cutter & Foil Screen Replacement Manual

Introduction

This manual provides instructions for the proper installation and maintenance of your XSPANDER replacement shaver cutter and foil screen. Regular replacement ensures optimal shaving performance and comfort.

Compatibility: This replacement part is compatible with various Panasonic electric shaver models, including but not limited to: ES-GA20, ES8255, ES8162, ES8101, ES-LC62, ES8249, ES8243, ES101, ES8103, ES8109, ES-GA2, ES-GA21S, ES-LT41, ES-LT71, ES-SL41, ES-ST23, WES9068, ES8103S, S8161, ES-LA92, ES-LA62, ES-LA90, ES-LA12, ES8119, ES8111, ES8253, ES-LA50, ES-LA10, ESLF70, ESLF50, ES-LA84, ES8163, ES8113, ES8116, ES8251, ES8258, ES-LT20, ESLT40, ESLA70, ESLC60, ES8103, ES8103S.

Package Contents

Your package should contain the following items:

• 1 x Shaver Replacement Foil Screen
• 2 x Shaver Replacement Inner Cutters

Image: The XSPANDER replacement foil screen and two inner cutters, ready for installation.

Installation Instructions

1. Preparation: Before installing the new replacement parts, ensure your electric shaver is turned off and unplugged. Thoroughly clean the shaver head area to remove any hair clippings or debris.
2. Remove Old Parts: Carefully remove the existing foil screen and inner cutters from your shaver. Refer to your shaver's original manual for specific removal instructions if needed.
3. Install New Inner Cutters: Place the two new XSPANDER inner cutters onto their respective posts within the shaver head. Ensure they are seated correctly and securely.
4. Install New Foil Screen: Align the new XSPANDER foil screen over the inner cutters and press it down gently until it clicks into place. Ensure it is firmly attached and does not wobble.
5. Verify Installation: Once installed, gently shake the shaver to confirm that all parts are secure.

Maintenance and Care

To maintain optimal performance and hygiene of your shaver, follow these recommendations:

• Regular Cleaning: After each use, clean the shaver head and blades to remove hair clippings. Most Panasonic shavers are waterproof and can be rinsed under running water.
• Replacement Schedule: It is recommended to replace the shaver cutter and foil screen every 18 months. This ensures the blades remain sharp, providing a close and comfortable shave while reducing skin irritation.

Image: A visual reminder to replace shaving heads every 18 months to maintain sharp blades and reduce skin friction, illustrating the difference between normal use and dull blades.

Troubleshooting

If you experience issues after replacing the cutter and foil screen, consider the following:

• Poor Shaving Performance: Ensure the foil screen and inner cutters are correctly seated and locked into place. A loose component can affect cutting efficiency.
• Skin Irritation: Verify that the replacement parts are clean and free of debris. If irritation persists, ensure the parts are fully compatible with your specific shaver model.
• Unusual Noise: Check for any foreign objects or misaligned parts within the shaver head. Re-install the components if necessary.

Specifications