This manual provides comprehensive instructions for the BOSS RC-600 Loop Station Looper Pedal, covering setup, operation, maintenance, and specifications. The RC-600 is an advanced floor looper designed for guitarists, singer-songwriters, and multi-instrumentalists, offering six stereo tracks, premium 32-bit sound, and extensive customization options.
Key Features
- Stereo Loop Pedal with 6 Stereo Phrase Tracks
- 2 XLR Microphone Inputs with Phantom Power
- 2 Stereo Instrument/Line Input Pairs
- 99 Phrase Memory Presets
- Rhythm Guide
Product Overview
Front panel view of the BOSS RC-600 Loop Station. It features a central display screen, control knobs for output level and menu navigation, and nine assignable footswitches. The top row of footswitches includes controls for Track Select, Undo/Redo, and All Start/Stop. The bottom row provides six footswitches for Record/Play and Stop functions across multiple tracks. Inputs and outputs are located on the rear panel.
Setup
Power Connection
Connect the included AC adapter to the DC IN jack on the rear panel of the RC-600. Ensure the power adapter is securely connected before powering on the unit. The RC-600 operates on 9 Volts (Corded Electric).
Audio Connections
The RC-600 offers a variety of input and output options:
- Instrument Inputs: Connect your guitar, bass, or other instruments to the INST 1 (L/MONO, R) and INST 2 (L/MONO, R) input jacks.
- Microphone Inputs: Use the two XLR microphone inputs (MIC 1, MIC 2) for vocal or acoustic instrument recording. These inputs provide phantom power for condenser microphones.
- Main Outputs: Connect the MAIN OUTPUT (L/MONO, R) jacks to your amplifier, mixer, or audio interface.
- Sub Outputs: Utilize the SUB OUTPUT 1 (L/MONO, R) and SUB OUTPUT 2 (L/MONO, R) for routing specific tracks or effects to separate destinations.
- Phones Output: Connect headphones to the PHONES jack for monitoring your performance.
Initial Configuration
Upon first power-up, the unit may guide you through basic settings. Refer to the on-screen prompts for initial setup. Ensure all cables are connected correctly before starting operation.
Operating Instructions
Basic Looping Functions
The RC-600 allows for recording, playing, and overdubbing loops across six stereo tracks. Use the dedicated REC/PLAY and STOP footswitches for each track (labeled 1-6) to control individual loops.
- Record: Press a REC/PLAY footswitch to start recording on an empty track.
- Play/Overdub: Press the REC/PLAY footswitch again to stop recording and begin playback. Pressing it during playback will start overdubbing.
- Stop: Press the corresponding STOP footswitch to halt playback or recording on a track.
- Undo/Redo: The UNDO/REDO footswitch allows you to reverse or reapply the last recording action.
- All Start/Stop: The ALL START/STOP footswitch controls playback for all tracks simultaneously.
Track Management
The RC-600 features 99 Phrase Memory Presets, allowing you to save and recall entire loop setups. Use the central display and navigation buttons (MENU, EXIT, ENTER, PAGE) to access and manage these presets.
Effects and Customization
The unit includes a wide range of built-in effects for both input signals and individual tracks. These can be accessed and adjusted via the menu system. The RC-600 also offers features like Half Speed and Reverse, accessible via dedicated footswitches, to creatively manipulate your loops.
Footswitch Assignment
All nine footswitches on the RC-600 are assignable, allowing you to customize their functions to suit your performance style. This flexibility enables you to configure the pedal for optimal workflow. Consult the detailed menu options for footswitch assignment.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the unit. Avoid abrasive cleaners or solvents.
- Storage: Store the RC-600 in a dry, dust-free environment when not in use. Protect it from extreme temperatures and humidity.
- Firmware Updates: Periodically check the BOSS website for firmware updates to ensure optimal performance and access to new features.
Troubleshooting
- No Power: Ensure the AC adapter is correctly connected and the power outlet is functional.
- No Sound: Check all audio cable connections. Verify input and output levels. Ensure tracks are playing and not muted.
- Distorted Sound: Adjust input levels to prevent clipping. Check cable integrity.
- Footswitches Not Responding: Verify footswitch assignments in the system settings.
- "Too Busy" Error: This may indicate excessive processing load. Try reducing the number of active effects or tracks, or simplify complex routing.
Specifications
- Model Number: RC-600
- Brand: BOSS
- Item Weight: 2 Kilograms (4.4 pounds)
- Product Dimensions: 17.13"L x 6.42"W x 2.6"H
- Body Material: Metal
- Power Source: Corded Electric
- Voltage: 9 Volts
- Connector Type: USB
- Hardware Interface: USB
- Signal Format: Digital
Warranty and Support
For warranty information and technical support, please refer to the official BOSS Store or contact BOSS customer service directly. Keep your proof of purchase for warranty claims.
