Introduction
Thank you for purchasing the Naxa Electronics ND-863 2.1 Channel Home Theater DVD Speaker System. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new home theater system. Please read this manual thoroughly before use to ensure proper operation and to maximize your enjoyment of the product.
Included Components:
- DVD Player
- 2 Satellite Speakers
- Subwoofer
- Remote Control
- A/V Cable
- User Manual
Figure 1: Naxa ND-863 2.1 Channel Home Theater DVD Speaker System
Setup
1. Placement
Position the DVD player on a stable, flat surface with adequate ventilation. Place the two satellite speakers equidistant from your primary listening position, ideally at ear level. The subwoofer can be placed on the floor, preferably in a corner or near a wall for enhanced bass response.
Figure 2: Example setup of the Naxa ND-863 system in a home environment.
2. Connections
Ensure all components are powered off before making any connections.
- Speaker Connection: Connect the two satellite speakers to the corresponding speaker outputs on the DVD player unit. Connect the subwoofer to the dedicated subwoofer output.
- Video Output to TV: Choose one of the following video connection methods to your television:
- Component Video (Y/Pb/Pr): For best video quality, connect the Y, Pb, and Pr output jacks on the DVD player to the corresponding input jacks on your TV using a component video cable.
- S-Video: Connect the S-Video output jack on the DVD player to the S-Video input on your TV.
- Composite Video: Connect the VIDEO output jack on the DVD player to the VIDEO input on your TV using an RCA video cable (yellow connector).
- Audio Output to External Audio System (Optional): If connecting to an external amplifier or receiver, use the Coaxial Digital Audio output or the RCA 2.1 channel audio output.
- Power Connection: Once all audio and video connections are made, connect the power cord of the DVD player to a standard AC power outlet.
Figure 3: Back Panel Connections
Operating
1. Power On/Off
Press the POWER button on the front panel of the DVD player or on the remote control to turn the system on or off.
2. DVD Playback
- Press the OPEN/CLOSE button on the front panel or remote to open the disc tray.
- Place a DVD or CD disc gently into the tray with the label side facing up.
- Press the OPEN/CLOSE button again to close the tray. The disc will begin playing automatically or display the disc menu.
- Use the PLAY/PAUSE, STOP, REV, FWD, PREV, and NEXT buttons on the remote control to manage playback.
3. Audio Control
Use the VOL + and VOL - buttons on the remote control to adjust the overall volume. Press the MUTE button to temporarily silence the audio.
4. Remote Control Functions
The included remote control provides full functionality for your home theater system. Familiarize yourself with the button layout and their corresponding functions.
Figure 4: Remote Control Layout
- POWER: Turns the unit on/off.
- OPEN/CLOSE: Opens and closes the disc tray.
- MUTE: Mutes/unmutes the sound.
- OSD: Displays On-Screen Display menu.
- SUBTITLE: Selects subtitle language.
- LANGUAGE: Selects audio language.
- REPEAT: Repeats current track/chapter/title.
- ANGLE: Changes camera angle (for compatible DVDs).
- ZOOM: Zooms in/out on the picture.
- SETUP: Accesses the system setup menu.
- Navigation Buttons (UP, DOWN, LEFT, RIGHT, ENTER): Used for menu navigation and selection.
- MENU/PBC: Accesses disc menu or Playback Control.
- TITLE: Returns to the disc title menu.
- PLAY/PAUSE: Starts or pauses playback.
- STOP: Stops playback.
- RETURN: Returns to the previous menu or screen.
- REV/FWD: Fast reverse/forward playback.
- PREV/NEXT: Skips to previous/next track or chapter.
- VOL +/-: Adjusts volume level.
- PROG: Programs playback order.
- DVD/FM: Switches between DVD and FM radio mode (if applicable).
- RESET: Resets system settings.
Maintenance
Proper care and maintenance will ensure the longevity and optimal performance of your Naxa ND-863 system.
- Cleaning the Unit: Use a soft, dry cloth to wipe the exterior of the DVD player and speakers. For stubborn marks, slightly dampen the cloth with water. Avoid using abrasive cleaners, waxes, or solvents.
- Disc Care: Handle discs by their edges. Keep discs clean and free of scratches. Store discs in their cases when not in use.
- Ventilation: Ensure the DVD player has adequate ventilation. Do not block ventilation openings or place the unit on soft surfaces that may impede airflow.
- Environmental Conditions: Avoid exposing the unit to extreme temperatures, humidity, direct sunlight, or dusty environments.
Troubleshooting
If you encounter issues with your Naxa ND-863 system, refer to the following common problems and solutions before seeking professional service.
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power | Power cord not securely connected; Power outlet not active. | Check power cord connection; Try a different power outlet. |
| No Sound | Volume is too low or muted; Speaker cables not connected properly; Incorrect audio output selected on TV. | Increase volume and check mute status; Verify speaker connections; Select correct audio input on your TV. |
| No Video | Video cable not connected properly; Incorrect video input selected on TV. | Check video cable connections; Select correct video input on your TV. |
| Disc Not Playing | Disc is dirty or scratched; Disc is inserted incorrectly; Disc format not supported. | Clean the disc; Insert disc with label side up; Ensure disc is a supported format (DVD, CD). |
| Remote Control Not Working | Batteries are dead or inserted incorrectly; Obstruction between remote and unit. | Replace batteries, ensuring correct polarity; Remove any obstructions. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | ND-863 |
| Mounting Type | Floor Standing, Wall Mount, Tabletop Mount |
| Speaker Type | Surround Sound Speaker System |
| Special Feature | Hi Res Audio |
| Recommended Uses | Home Theater |
| Compatible Devices | Television, Projector, Desktop, Laptop |
| Controller Type | Remote Control |
| Surround Sound Channel Configuration | 2.1 |
| Color | Black |
| Product Dimensions | 2"D x 9.4"W x 0.79"H |
| Item Weight | 5.01 Pounds |
| Control Method | Remote |
| Speaker Size | 4.7 Inches |
| Power Source | Corded Electric |
| Woofer Diameter | 6 Inches |
| Audio Driver Type | Dynamic Driver |
| Subwoofer Connectivity Technology | Wired |
| Connectivity Technology | RCA |
| Speaker Maximum Output Power | 120 Watts |
| Frequency Response | 4 Hz |
| Audio Output Mode | Stereo |
Warranty and Support
The Naxa ND-863 Home Theater System comes with a Limited Warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the duration and coverage details.
For technical support, service, or further inquiries, please refer to the contact information provided in the user manual included with your product or visit the official Naxa Electronics website.
