Onbalance R-E1 Transcutaneous Neuromuscular Electro-stimulator User Manual

Introduction

This manual provides comprehensive instructions for the safe and effective operation of your Onbalance R-E1 Transcutaneous Neuromuscular Electro-stimulator. Please read this manual thoroughly before using the device and retain it for future reference.

The Onbalance R-E1 is designed for both TENS (Transcutaneous Electrical Nerve Stimulation) and EMS (Electrical Muscle Stimulation) therapies, offering a versatile solution for pain relief, muscle strengthening, and toning.

Safety Information

Important Safety Precautions:

• Do not use if you have a pacemaker, implanted defibrillator, or other implanted metallic or electronic device.
• Consult a physician before use if you have any pre-existing medical conditions, including but not limited to heart disease, epilepsy, or pregnancy.
• Do not apply electrodes over open wounds, rashes, swollen, red, infected, or inflamed areas.
• Keep out of reach of children.
• Use only as directed.

Product Overview

The Onbalance R-E1 is a compact and lightweight electro-stimulator featuring 4 independent channels, a clear LCD display, and a rechargeable battery. It offers 30 TENS programs and 20 EMS programs for a wide range of therapeutic applications.

Figure 1: Front view of the Onbalance R-E1 device, showing the LCD screen, control buttons (Power/Mode, S, T), and four channel outputs (CH1, CH2, CH3, CH4) with intensity adjustment buttons.

Figure 2: Angled view of the Onbalance R-E1 device, highlighting its compact design and the side profile.

Figure 3: Onbalance R-E1 device with its LCD display active, showing various program settings, intensity levels, and therapy modes (TENS/EMS).

What's Included

Your Onbalance R-E1 package includes the following components:

• 1 x Onbalance R-E1 Main Device
• 4 x Electrode Cables
• 4 x 5x5 cm Electrodes (Pads)
• 1 x Rechargeable Battery (pre-installed or separate)
• 1 x USB Charging Cable
• 1 x User Manual (this document)

Figure 4: Included accessories: electrode pads and electrode cables for the Onbalance R-E1 device.

Setup

1. Charge the Device: Connect the USB charging cable to the device and a suitable USB power source (e.g., computer USB port, wall adapter). The battery indicator on the LCD will show charging status. Ensure the device is fully charged before first use.
2. Attach Electrode Cables: Insert the pin connectors of the electrode cables into the corresponding channels (CH1, CH2, CH3, CH4) on the top of the device.
3. Connect Electrodes: Attach the self-adhesive electrode pads to the other end of the electrode cables. Ensure a secure connection.
4. Prepare Skin: Clean and dry the skin area where electrodes will be placed. Remove any lotions, oils, or dirt to ensure proper adhesion and conductivity.
5. Apply Electrodes: Carefully peel the electrodes from their protective film and apply them firmly to the desired treatment area on your skin. Ensure the entire surface of the electrode is in contact with the skin.

Operating Instructions

Power On/Off and Mode Selection

1. Power On: Press and hold the ⏻/M button for a few seconds to turn on the device. The LCD screen will illuminate.
2. Select Mode (TENS/EMS): Short press the ⏻/M button to switch between TENS and EMS modes. The selected mode will be displayed on the screen.
3. Select Program: Use the 'S' (Set) button to cycle through the available programs within the selected mode (30 TENS programs, 20 EMS programs).
4. Adjust Time: Use the 'T' (Time) button to set the treatment duration (5 to 90 minutes).
5. Adjust Intensity: For each channel (CH1-CH4), use the corresponding '+' and '-' buttons to increase or decrease the intensity level (0 to 40 levels). Start with a low intensity and gradually increase until a comfortable sensation is felt.
6. Power Off: Press and hold the ⏻/M button again for a few seconds to turn off the device. The device will automatically shut off after 1 minute of inactivity.

TENS Therapy (Transcutaneous Electrical Nerve Stimulation)

TENS therapy is primarily used for temporary pain relief. It works by sending small electrical impulses through electrodes placed on the skin, which can help block pain signals to the brain and stimulate endorphin production.

Figure 5: Example of electrode placement for TENS therapy on the knee for pain relief.

Common Applications: Neck pain, shoulder pain, back pain, joint pain, hip pain, hand pain, abdominal pain, foot pain, upper and lower limb pain due to tension from exercise, work, or domestic tasks.

EMS Therapy (Electrical Muscle Stimulation)

EMS therapy is used for muscle strengthening, toning, and rehabilitation. It works by causing muscles to contract, similar to how they would during physical exercise.

Figure 6: Example of electrode placement for EMS therapy on the chest for muscle strengthening.

Common Applications: Muscle rehabilitation, muscle strengthening, muscle toning, improving muscle performance.

Maintenance and Care

• Cleaning the Device: Wipe the device with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
• Electrode Care: After each use, reattach the electrodes to their protective film to preserve their adhesive properties. Store them in a cool, dry place. Replace electrodes when they lose their stickiness.
• Battery Care: Recharge the device regularly, even if not in frequent use, to maintain battery health. Avoid extreme temperatures.
• Storage: Store the device and accessories in their original packaging or a protective case in a cool, dry place, away from direct sunlight and moisture.

Troubleshooting

Specifications

Warranty and Support

The Onbalance R-E1 device comes with a 3-year manufacturer's warranty. Please retain your proof of purchase for warranty claims.

For technical support, warranty inquiries, or replacement parts, please contact Onbalance customer service through their official website or the retailer where you purchased the device.

Manufacturer: ONBALANCE