ETA Stephany Handheld Garment Steamer User Manual

1. Introduction

This user manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your ETA Stephany Handheld Garment Steamer, Model ETA227090000. Please read this manual thoroughly before first use and keep it for future reference.

2. Important Safety Instructions

• Always ensure the voltage indicated on the appliance corresponds to your mains voltage.
• Do not immerse the appliance, power cord, or plug in water or other liquids.
• Keep the appliance out of reach of children and pets.
• Never direct steam at people, animals, or electrical appliances.
• Unplug the steamer from the power outlet when filling with water, emptying, or when not in use.
• Use only distilled or demineralized water to prevent mineral buildup.
• Do not open the water tank cap during operation.
• Allow the appliance to cool completely before cleaning or storing.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.

3. Product Overview

The ETA Stephany Handheld Garment Steamer is designed for quick and effective wrinkle removal, fabric refreshing, and sanitization. It features a ceramic surface with 7 nozzles and adjustable steam intensity.

Figure 3.1: Front view of the ETA Stephany Handheld Garment Steamer, showcasing its ergonomic design and steam head.

Components:

• Steam Head with Ceramic Surface and 7 Nozzles
• Steam Trigger
• Water Tank (380 ml capacity)
• Water Tank Cap
• Power Cord
• Base Unit
• Measuring Cup (for filling)
• Fabric Brush Attachment (for thicker fabrics, lint, and pet hair removal)
• Mesh Attachment (for delicate fabrics)

Figure 3.2: Overview of the steamer highlighting key features such as adjustable steam intensity, 380 ml tank capacity, ceramic surface with 7 nozzles, and 1400W power.

Figure 3.3: The steamer shown with the fabric brush attachment, ideal for removing lint, hair, and dirt from various textiles.

4. Setup and First Use

1. Unpack the Steamer: Carefully remove all packaging materials and inspect the steamer for any damage.
2. Fill the Water Tank:
   • Ensure the steamer is unplugged.
   • Open the water tank cap located on the base unit.
   • Use the provided measuring cup to fill the 380 ml water tank with distilled or demineralized water. Do not overfill.
   • Close the water tank cap securely.
   

   Figure 4.1: Illustration of filling the removable water tank using the provided measuring cup.
3. Attach Accessories (Optional): If using, attach the fabric brush or mesh attachment to the steam head. Ensure it clicks into place.
4. Power On: Plug the power cord into a suitable electrical outlet.

5. Operating Instructions

1. Preheating: Once plugged in, the steamer will begin to heat up. Wait for the indicator light (if present) to signal readiness, typically within a few seconds.
2. Steaming Garments:
   • Hang the garment on a hanger.
   • Hold the steam head close to the fabric, but not touching it directly, especially for delicate materials.
   • Press and hold the steam trigger to release steam.
   • Move the steamer slowly over the fabric, from top to bottom, allowing the steam to penetrate and relax the fibers.
   • For stubborn wrinkles, gently pull the fabric taut with your free hand while steaming.
   • For thicker fabrics or to remove lint/pet hair, use the fabric brush attachment.
   

   Figure 5.1: Close-up of the steam trigger, used to activate steam release during operation.
3. Adjustable Steam Intensity: If your model features adjustable steam intensity, use the control (refer to Figure 3.2 for potential location) to select the appropriate steam level for your fabric type.
4. Finishing: Once steaming is complete, release the steam trigger and unplug the appliance. Allow the garment to cool and dry before wearing or storing.

6. Maintenance and Cleaning

Regular cleaning ensures optimal performance and extends the lifespan of your steamer.

1. Before Cleaning: Always unplug the steamer and allow it to cool completely.
2. Empty Water Tank: Remove the water tank and empty any remaining water.
3. Clean Exterior: Wipe the exterior of the steamer with a soft, damp cloth. Do not use abrasive cleaners or solvents.
4. Clean Steam Head: Use a cotton swab or soft brush to gently clean around the steam nozzles if any residue is visible.
5. Descaling (if necessary): If you notice reduced steam output or mineral buildup, a descaling solution designed for steamers can be used. Follow the descaling product's instructions carefully. Using distilled water regularly minimizes the need for descaling.
6. Storage: Store the steamer in a dry, cool place, preferably in its original packaging or a protective bag. Ensure the water tank is empty before storage.

7. Troubleshooting

If you encounter issues not listed here or if the problem persists, please contact customer support.

8. Technical Specifications

9. Warranty and Customer Support

For warranty information, please refer to the warranty card included with your product or visit the official ETA website. For technical support, spare parts, or service inquiries, please contact your local ETA customer service center. Keep your purchase receipt as proof of purchase.