Pursalt 5.5 Inch Himalayan Salt Lamp Night Light with Remote Control

Introduction

This manual provides essential information for the safe and effective use of your Pursalt 5.5 Inch Himalayan Salt Lamp. This unique lamp is crafted from 100% natural Himalayan crystal rock salt, offering a soothing ambiance with its color-changing LED light. It features a multi-function remote control for personalized lighting experiences.

What's in the Box

• 100% Original Hand-selected Himalayan Crystal Rock Salt Lamp (approx. 1.65 lbs & 5.5 inches)
• Multi-function Remote Control
• Taly Wooden Base
• 3 Watt Fixed Multicolor Bulb
• USB Cable

Note: Due to the natural properties and handcrafted nature of the salt rock, there may be slight differences in weight and height. The package does not include an AC adapter or power bank.

Setup Instructions

1. Unpack the Lamp: Carefully remove the Himalayan salt lamp from its packaging. Ensure all components listed in "What's in the Box" are present.
2. Remove Protective Wrapping: Locate and remove any plastic polybag or shrink wrap covering the salt rock before plugging in the lamp.
3. Place the Lamp: Position the lamp on a stable, flat surface. It is recommended to place it on a placemat or coaster to protect furniture, as salt lamps can sometimes retain moisture.
4. Connect Power: Insert the USB cable into the lamp's base and connect the other end to a compatible USB power source (e.g., a USB wall adapter, computer USB port, or power bank - not included).
5. Initial Use: For the first 24 hours of use, turn on the lamp to help dry out any moisture it may have retained during transit.

Image: The salt lamp is powered via a USB cable, which can be connected to various USB power sources like a laptop, power bank, or wall adapter.

Operating Instructions

Your Pursalt Himalayan Salt Lamp comes with a multi-function remote control to customize your lighting experience.

Image: The remote control features buttons for power, brightness adjustment, 16 individual color selections, and four dynamic light modes.

Remote Control Functions:

• Power ON/OFF: Use the OFF and ON buttons to turn the lamp on or off.
• Brightness Adjustment: Use the Brightness +/- buttons (sun icons) to increase or decrease the light intensity.
• Color Selection (Monochrome Mode): Choose from 16 distinct colors by pressing the corresponding color buttons on the remote.
• Dynamic Light Modes:
  • FLASH: The light flashes at a constant speed, cycling through colors.
  • STROBE: The light will be in strobe mode, rapidly changing colors.
  • FADE: The light will fade in and out gradually between colors.
  • SMOOTH: The light changes slowly, transitioning smoothly between colors.

Maintenance

• Cleaning: To clean the lamp, switch it off and wipe it with a slightly damp sponge or dry towel. Do not use excessive water.
• Moisture Management: Himalayan salt lamps are hygroscopic, meaning they absorb moisture from the air. If the lamp feels damp or appears to be "sweating," turn it on for several hours to allow the heat from the bulb to dry the salt.
• Placement: Always keep the lamp on a placemat or coaster to prevent moisture from damaging furniture.
• Storage: If not using the lamp for an extended period, disconnect the power cable and store it in a dry, airtight bag to prevent moisture absorption.
• Handling: The salt rock is fragile; handle with care to avoid breakage.

Image: The natural Himalayan salt rock lamp, which requires careful handling and maintenance.

Troubleshooting

• Lamp Not Lighting Up:
  • Ensure the USB cable is securely connected to both the lamp and the power source.
  • Verify that the USB power source is functional (e.g., try plugging another device into the same port).
  • Check if the remote control battery needs replacement.
• Remote Control Not Responding:
  • Ensure there are no obstructions between the remote and the lamp.
  • Replace the remote control battery if the issue persists.
  • Try operating the remote closer to the lamp.
• Lamp is "Sweating" or Damp:
  • This is normal for salt lamps in humid environments. Turn the lamp on for several hours to allow the heat from the bulb to dry the salt.
  • Ensure the lamp is placed in a dry area, away from excessive humidity.

Specifications

Warranty and Support

For warranty information or product support, please refer to the contact details provided with your purchase or visit the official Pursalt website. Keep your proof of purchase for any warranty claims.