NutriPro Juicer Mixer Grinder - Smoothie Maker - 500 Watts (3 Jar, Silver) User Manual

Product Overview

The NutriPro Juicer Mixer Grinder is a versatile kitchen appliance designed for efficient blending, mixing, and grinding. It features a powerful 500W copper motor and durable components to help you prepare a variety of foods and beverages quickly and easily.

Image: The NutriPro Juicer Mixer Grinder showing the main unit, two blade attachments, a small jar, and a sipper jar.

Safety Instructions

• Always ensure the appliance is unplugged before assembling, disassembling, or cleaning.
• Do not immerse the motor base in water or any other liquid. Clean with a damp cloth only.
• Keep hands and utensils out of the jar while blending to prevent injury.
• Ensure the jar and blade assembly are securely locked onto the motor base before operating.
• Do not operate the appliance continuously for more than 1 minute to prevent overheating. Allow a cool-down period between uses.
• Keep out of reach of children.
• Use only original NutriPro accessories and parts.

Components

The NutriPro Juicer Mixer Grinder comes with the following components:

• Motor Base: The main unit housing the 500W copper motor.
• 3 Jars: Various sizes for different blending and grinding needs.
• 2 Blade Attachments:
  • 4-Leaf Dry Grinding Blade: Ideal for nuts, spices, coffee beans, grains, and pulses.
  • 6-Leaf Wet Grinding Blade: Suitable for dips, juices, gravies, chutneys, and smoothies.
• Sipper Jar Lid: For easy portability of smoothies and juices.

Image: Visual representation of the NutriPro's powerful 500W copper motor, unbreakable jars, and 22000 RPM speed.

Image: Examples of food items that can be prepared using the NutriPro, including chutneys, smoothies, milkshakes, spices, and dry fruits.

Image: Close-up of the 4-leaf dry grinding blade and its recommended uses for nuts, spices, coffee beans, grains, and pulses.

Image: Close-up of the 6-leaf wet grinding blade and its recommended uses for dips, juices, gravies, chutneys, and smoothies.

Setup

1. Unpack: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
2. Clean: Before first use, wash all jars and blade attachments with warm soapy water. Rinse thoroughly and dry completely. Wipe the motor base with a damp cloth.
3. Placement: Place the motor base on a stable, flat, and dry surface. Ensure there is adequate ventilation around the unit.
4. Assemble Jar:
   • Fill the desired jar with ingredients. Do not overfill beyond the maximum fill line.
   • Attach the appropriate blade assembly (dry or wet) by twisting it onto the jar until securely tightened.
5. Attach to Base: Invert the assembled jar and blade, and place it onto the motor base. Twist clockwise until it locks securely into place.
6. Connect Power: Plug the power cord into a suitable electrical outlet (230 Volts).

Operating Instructions

1. Preparation: Ensure the unit is properly set up as per the "Setup" section.
2. Blending/Grinding:
   • Press the ON/OFF toggle switch located on the motor base to start the operation.
   • For best results, use short pulses rather than continuous operation, especially for tough ingredients.
   • Do not operate for more than 60 seconds continuously. If more processing is needed, allow the motor to rest for a few minutes before resuming.
3. Stopping Operation: Press the ON/OFF toggle switch again to turn off the appliance.
4. Removing Jar: Once the blades have stopped completely, twist the jar counter-clockwise to unlock it from the motor base and lift it off.
5. Serving: Remove the blade assembly by twisting it counter-clockwise from the jar. You can then attach the sipper lid to the jar for on-the-go consumption, or pour contents into a separate container.

Maintenance and Cleaning

• Cleaning Jars and Blades:
  • After each use, immediately rinse the jars and blade assemblies to prevent food from drying on them.
  • Wash with warm soapy water using a brush for hard-to-reach areas. Be cautious around the sharp blades.
  • Rinse thoroughly and allow to air dry or dry with a clean cloth.
• Cleaning Motor Base:
  • Unplug the motor base from the power outlet.
  • Wipe the exterior of the motor base with a soft, damp cloth. Do not use abrasive cleaners or immerse in water.
  • Ensure the motor base is completely dry before storing or next use.
• Storage: Store the appliance and its accessories in a clean, dry place.

Image: Key design features of the NutriPro, including heat dissipation, anti-slip base, and ease of cleaning.

Troubleshooting

Specifications

• Brand: nutripro
• Model: Nutri Blender
• Power: 500 Watts
• Motor Type: Copper Motor
• RPM: Up to 22,000 RPM
• Jars: 3 (various capacities)
• Blades: 2 (Stainless Steel, 4-leaf for dry, 6-leaf for wet)
• Voltage: 230 Volts
• Special Features: Anti-Slip Base, Easy to Clean, Heat Dissipation Design
• Product Dimensions: 30.3D x 13.3W x 22.4H Centimeters
• Item Weight: 1 kg 860 g
• Included Components: Mixers (Motor Base, Jars, Blades, Sipper Lid)
• Country of Origin: India

Warranty and Support

The NutriPro Juicer Mixer Grinder comes with a 2 Year Limited Warranty. For any service-related queries or support, please contact:

• Customer Care No.: 90225 90225
• Operating Hours: Monday to Sunday - 9:30 a.m. to 5:30 p.m.
• Service: 2 Year Pick and Drop Service Throughout India.

Image: Information regarding NutriPro's warranty, customer support, and service offerings.