Product Overview
The FINGERS 2D-QuickScan WL5 is a versatile barcode scanner designed for efficient data capture. It offers 3-in-1 connectivity options: Wireless (2.4 GHz USB Receiver), Bluetooth, and Wired (Type-C Cable), providing flexibility for various environments. Equipped with Quick Scan and CMOS Image Technology, it accurately reads both 1D and 2D barcodes at a rapid rate of 200 scans per second. The scanner features a robust design, a large internal battery for extended use, and 4 MB of in-built memory for offline storage.
Image: The FINGERS 2D-QuickScan WL5 barcode scanner, shown with its charging stand and a USB receiver, highlighting its compact and ergonomic design.
Package Contents
Upon unboxing, please verify that all components are present:
- 1 N - FINGERS 2D-QuickScan WL5 Barcode Scanner
- 1 N - USB Receiver (for 2.4 GHz Wireless connection)
- 2 N - USB Type-C Cable (for charging and wired connection)
- 1 N - Quick Start Guide
- 1 N - Brand Note
Image: A visual representation of the items included in the FINGERS 2D-QuickScan WL5 product box, showing the scanner, receiver, cables, and documentation.
Setup and Connectivity
The FINGERS 2D-QuickScan WL5 offers three primary connection methods:
1. Wireless (2.4 GHz USB Receiver)
- Insert the provided USB Receiver into an available USB port on your computer or host device.
- The system will automatically detect and install the necessary drivers.
- Turn on the barcode scanner. It should automatically pair with the receiver.
- A successful connection is indicated by a specific LED light and/or beep from the scanner.
2. Bluetooth Connection
- Ensure your host device (mobile phone, tablet, laptop) has Bluetooth enabled.
- Put the scanner into Bluetooth pairing mode (refer to the Quick Start Guide for specific button presses, typically a long press of the trigger or a dedicated Bluetooth button).
- On your host device, search for available Bluetooth devices and select "FINGERS 2D-QuickScan WL5" from the list.
- Confirm the pairing. The scanner will indicate a successful connection.
- The wireless Bluetooth transmission range is approximately 30-50 meters in open space.
3. Wired Connection (Type-C Cable)
- Connect one end of the provided USB Type-C cable to the scanner's Type-C port.
- Connect the other end of the USB cable to an available USB port on your computer or host device.
- The scanner will function as a wired device and also charge its internal battery simultaneously.
Image: A diagram visually explaining the three connectivity modes: Wireless (2.4 GHz with receiver), Bluetooth, and Wired (with Type-C cable), along with the scanner's stand.
Operating Instructions
Once connected, the FINGERS 2D-QuickScan WL5 is ready for operation.
Scanning Barcodes
- Point the scanner's window at the barcode you wish to scan.
- Press and hold the trigger button. A red aiming beam will appear.
- Align the aiming beam across the entire barcode.
- Upon a successful scan, the scanner will emit a beep and/or the LED indicator will flash. The scanned data will be transmitted to your connected device.
The scanner is capable of interpreting various 1D and 2D codes, including QR codes, Data Matrix, and PDF417, among others.
Image: A user operating the FINGERS 2D-QuickScan WL5 scanner to read a large 2D QR code displayed on a screen, demonstrating its 2D scanning capability.
Indicators
- Beeper: Provides audible feedback for successful scans, connection status, and low battery warnings.
- LED Indicator: Displays visual cues for power status, charging, and successful data transmission.
Offline Storage Mode
The scanner features 4 MB of in-built memory, allowing it to store up to 512,000 characters (approximately 20,000 barcodes) in offline/inventory storage mode. This is useful when working out of range or without a direct connection to a host device. Refer to the Quick Start Guide for instructions on enabling and offloading data from offline storage mode.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your FINGERS 2D-QuickScan WL5 barcode scanner.
Cleaning
- Use a soft, lint-free cloth slightly dampened with water or a mild, non-abrasive cleaning solution to wipe the exterior of the scanner.
- For the scanning window, use a lens cleaning cloth or a soft, dry cloth to gently remove dust and smudges. Avoid harsh chemicals or abrasive materials that could scratch the window.
- Do not immerse the scanner in any liquid.
Storage
- Store the scanner in a cool, dry place away from direct sunlight and extreme temperatures.
- When not in use for extended periods, ensure the battery is partially charged (around 50%) to preserve its lifespan.
Battery Care
- The scanner is equipped with a large capacity battery designed to scan up to 20,000 barcodes on a single charge.
- Charge the scanner using only the provided Type-C cable and a compatible power source.
- Avoid completely draining the battery frequently, as this can reduce its overall lifespan.
Troubleshooting
If you encounter issues with your FINGERS 2D-QuickScan WL5, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Scanner not turning on or responding. | Low battery; power button not pressed correctly; internal fault. | Charge the scanner for at least 2 hours. Ensure the power button is pressed firmly. If still unresponsive, contact support. |
| Cannot connect via Wireless (2.4 GHz) or Bluetooth. | Receiver not plugged in; Bluetooth not enabled on host; scanner not in pairing mode; out of range. | Ensure USB receiver is securely plugged in. Enable Bluetooth on your device and put scanner in pairing mode. Move scanner closer to the host device. |
| Scans are slow or inconsistent. | Poor barcode quality; improper scanning angle/distance; dirty scanning window. | Ensure barcode is clear and undamaged. Adjust scanning angle and distance. Clean the scanning window as per maintenance instructions. |
| No data transmitted after scanning. | Not properly connected to host device; scanner in offline storage mode. | Verify connection status (LED/beep). Check if scanner is in offline mode and switch to real-time transmission if needed (refer to Quick Start Guide). |
| Charging issues. | Faulty cable or power adapter; dirty charging port. | Try a different USB port or power adapter. Ensure the Type-C cable is fully inserted and the port is clean. |
Specifications
Key technical specifications for the FINGERS 2D-QuickScan WL5 Wireless Barcode Scanner:
| Feature | Detail |
|---|---|
| Brand | FINGERS |
| Model Name | 2D-QuickScan WL5 |
| Connectivity Technology | Bluetooth, 2.4 GHz Wireless (USB Receiver), USB Type-C Wired |
| Scan Rate | 200 fps (frames per second) |
| Compatible Devices | Laptop, Mobile Phones, Tablets, other Bluetooth-enabled devices |
| Product Dimensions | 1.7 x 0.8 x 0.7 cm |
| Item Weight | 205 g |
| Special Features | CMOS Image Technology, 1.5m drop resistance, Beeper & LED indicators, 4 MB in-built memory (512,000 characters), Battery capacity for up to 20,000 barcodes per charge. |
| Power Source | Corded Electric (via USB Type-C for charging) |
| Manufacturer | FINGERS, Dynamic Conglomerate Pvt. Ltd. |
| Country of Origin | India |
| First Available Date | 8 October 2021 |
Warranty and Support
FINGERS products are designed for reliability and performance. For any assistance or inquiries regarding your 2D-QuickScan WL5 barcode scanner, please contact the manufacturer's support.
- Manufacturer: Dynamic Conglomerate Pvt. Ltd.
- Contact Number: 9137141796
- Address: 4th Floor, Simba Tower, Vishveshwar Nagar, Goregaon, Mumbai, Maharashtra 400063, India
- Extended Warranty: An optional 1-Year Extended Warranty may be available for purchase. Please refer to your purchase details or contact the seller for more information.
For the latest information and support resources, visit the official FINGERS website or their Amazon brand store: FINGERS Amazon Store.
