Introduction
Thank you for choosing the Madesa Kit Bookshelf 6908 and Organizer 6906. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and keep them for future reference.
This product is designed for indoor use and is made from high-quality engineered wood sourced from renewable forests, reflecting Madesa's commitment to sustainability and durability.
Safety Information
- Always assemble the product on a soft, clean surface to prevent scratches.
- Ensure all hardware is securely tightened before use. Periodically check and re-tighten as necessary.
- Do not overload shelves. Each shelf is designed to hold up to 10 kg (22 lbs).
- For added stability and safety, especially in homes with children or in earthquake-prone areas, secure the unit to a wall using the provided anti-tip hardware.
- Keep small parts and hardware out of reach of children during assembly.
- Use appropriate tools for assembly.
Package Contents
Before starting assembly, verify that all components and hardware are present. Refer to the included parts list in your package. If any parts are missing or damaged, please contact Madesa customer support.
- Engineered wood panels for Bookshelf 6908 and Organizer 6906.
- Assembly hardware (screws, dowels, brackets, etc.).
- Anti-tip wall fixation kit.
- Assembly instructions (this manual).
Setup (Assembly)
Assembly is required for this product. Follow the step-by-step instructions provided in the package. It is recommended that two people assemble the unit for ease and safety.
- Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface. Identify each part using the provided diagrams.
- Assemble the Base: Begin by assembling the base structure of both the bookshelf and the organizer, following the numerical order in the diagram.
- Attach Side Panels and Shelves: Securely attach the side panels and then insert the shelves into their designated slots. Ensure all connections are firm.
- Install Back Panels: Attach the back panels. Note that some fasteners for the back panel may not have pre-marked positions, requiring careful alignment.
- Wall Fixation: For enhanced safety, especially to prevent tipping, secure the unit to a wall using the provided anti-tip hardware. This involves attaching a bracket to the top rear of the unit and then to the wall.
Operating (Usage)
The Madesa Kit Bookshelf and Organizer are designed for storing books, decorative items, and other personal belongings. Its versatile design makes it suitable for various rooms, including offices, living rooms, or bedrooms.
- Weight Distribution: Distribute weight evenly across the shelves. Avoid placing heavy items on only one side or at the very top.
- Shelf Capacity: Each shelf is designed to support a maximum weight of 10 kg (22 lbs). Do not exceed this limit to ensure stability and longevity of the unit.
- Placement: Place the unit on a level surface to prevent wobbling.
Maintenance
- Cleaning: Wipe the surfaces with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the finish.
- Dusting: Regularly dust the unit with a dry, soft cloth to prevent dust buildup.
- Hardware Check: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten if necessary to maintain structural integrity.
- Avoid Moisture: Do not expose the furniture to excessive moisture or direct sunlight, which can cause warping or fading.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit wobbles or is unstable. | Uneven floor; loose hardware; not properly secured to wall. | Ensure the unit is on a level surface. Check and tighten all screws. Install or verify wall fixation. |
| Difficulty during assembly. | Incorrect part orientation; missing hardware; unclear instructions. | Review the assembly diagrams carefully. Contact customer support if parts are missing or instructions are unclear. |
| Shelves appear to sag. | Overloaded shelves; improper assembly. | Reduce the weight on the shelves, ensuring it does not exceed 10 kg per shelf. Recheck assembly of shelf supports. |
Specifications
- Brand: Madesa
- Model Numbers: 6908 (Bookshelf), 6906 (Organizer)
- Material: Engineered Wood
- Color: Black
- Mounting Type: Floor Mount
- Bookshelf Dimensions (D x W x H): 30 x 37 x 204 cm
- Organizer Dimensions (D x W x H): 30 x 71 x 204 cm
- Total Dimensions (D x W x H, combined): 30 x 108 x 204 cm
- Item Weight: 49.4 Kilograms (combined)
- Assembly Required: Yes
- Origin: Mexico
- GTIN: 07891760880987
Warranty Information
Madesa products are manufactured with high-quality materials and craftsmanship. This product comes with a standard manufacturer's warranty covering defects in materials and workmanship under normal use. For specific warranty terms and duration, please refer to the documentation included with your purchase or contact Madesa customer support.
Additionally, a 30-day free return policy is typically offered for this product.
Extended warranty options may be available through third-party providers like Assurant. Please check with your retailer for details on purchasing extended protection plans.
Support
For assembly assistance, missing parts, or any other inquiries regarding your Madesa product, please contact Madesa customer support. You may find contact information on the Madesa official website or through your retailer.
Visit the official Madesa store for more information: Madesa Store on Amazon