VIDONN Heated Vest for Men with Battery Pack 12000mAh User Manual

1. Introduction

Thank you for choosing the VIDONN Heated Vest. This electric lightweight heating vest is designed to provide warmth and comfort in cold conditions, featuring a powerful 12000mAh battery pack and multiple heating settings. Please read this manual thoroughly before using the product to ensure safe and optimal operation.

2. Safety Information

Important Safety Instructions:

• Do not use the vest if it is wet.
• Do not use if the heating elements or wiring appear damaged.
• Avoid folding the vest tightly when in use to prevent damage to heating elements.
• Keep the battery pack away from water and extreme temperatures.
• Do not puncture, disassemble, or modify the battery pack.
• Consult a physician before use if you have a medical condition, are pregnant, or have a pacemaker.
• This product is not intended for use by individuals with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety.
• Always disconnect the battery pack before cleaning or storing the vest.

3. Package Contents

Please check the package contents upon receipt:

• 1 x VIDONN Heated Vest
• 1 x 12000mAh Battery Pack
• 1 x USB Charging Cable (for battery pack)
• 1 x User Manual

4. Setup

4.1 Charging the Battery Pack

Before first use, fully charge the 12000mAh battery pack. Connect the provided USB charging cable to the battery pack and a suitable USB power adapter (not included). The indicator lights on the battery pack will show the charging status.

4.2 Connecting the Battery Pack to the Vest

1. Locate the USB cable inside one of the vest's battery pockets.
2. Connect the USB cable from the vest to the output port of the fully charged 12000mAh battery pack.
3. Place the battery pack securely into the vest's pocket and zip it closed.

5. Operating Instructions

5.1 Powering On/Off and Adjusting Heat Settings

The vest features a control button, usually located on the chest, to manage power and heat levels.

1. To Power On: Press and hold the control button for 3-5 seconds until it illuminates. The vest will typically start on the highest heat setting (Red light).
2. To Adjust Heat Setting: Briefly press the control button to cycle through the heat levels:
   • High (Red Light): Provides maximum warmth.
   • Medium (White Light): Provides moderate warmth.
   • Low (Blue Light): Provides gentle warmth.
3. To Power Off: Press and hold the control button for 3-5 seconds until the light turns off.

5.2 Estimated Battery Life

The 12000mAh battery pack provides the following approximate heating durations:

• Low Setting: Up to 10 hours
• Medium Setting: Up to 6 hours
• High Setting: Up to 4 hours

Note: Actual battery life may vary based on ambient temperature, vest fit, and battery condition.

6. Maintenance

Proper care will extend the life of your heated vest.

1. Disconnect Battery: Always remove the battery pack before cleaning the vest.
2. Washing:
   • Hand Wash: Gently hand wash the vest in cold water with mild detergent.
   • Machine Wash: If machine washing, place the vest inside a mesh laundry bag to protect the heating elements and wiring. Use a gentle cycle with cold water.
3. Drying: Drip dry the vest in a cool, well-ventilated area. Ensure the vest is completely dry before reconnecting the battery or storing.
4. Do NOT: Bleach, iron, or dry-clean the heated vest. These actions can damage the heating elements and fabric.

7. Troubleshooting

If you encounter issues with your VIDONN Heated Vest, please refer to the following common solutions:

• Vest not heating:
  • Ensure the battery pack is fully charged.
  • Verify the battery pack is securely connected to the vest's USB cable.
  • Press and hold the power button on the vest for 3-5 seconds to ensure it is powered on.
  • Check if the USB cable or battery pack shows any visible damage.
• Short battery life:
  • Ensure the battery pack is fully charged before each use.
  • Operating on higher heat settings consumes battery faster. Try a lower setting for extended use.
  • Extreme cold temperatures can affect battery performance.
• Control button not responding:
  • Ensure the battery is connected and charged.
  • Try disconnecting and reconnecting the battery pack.
  • If the button is stuck or damaged, contact customer support.

If these steps do not resolve the issue, please contact VIDONN customer support for further assistance.

8. Specifications

9. Warranty and Support

VIDONN products are manufactured to high-quality standards. For any product support, warranty inquiries, or technical assistance, please contact our customer service team. Refer to your purchase documentation for specific warranty terms and contact information.

You can typically find support contact details on the retailer's website where you purchased the product or on the official VIDONN website.