Introduction
The Waterpik PowerPulse XPP-703E Flexible Neck Shower Head is designed to provide a customizable showering experience. Its unique 18-inch flexible neck arm allows for easy adjustment of shower height and spray angle, accommodating various user needs and shower pipe installations. This shower head features 7 distinct spray settings, including the patented PowerPulse Therapeutic Massage, engineered to deliver a powerful and soothing massage.
Key Features
- Flexible Shower Head: The 18-inch flexible neck arm adjusts for different heights and spray angles, moving and staying in desired positions.
- Adjustable Shower Height: Easily accommodates various heights, suitable for both low and high shower pipe installations, and different users including children.
- 7 Spray Settings: Offers a range of modes including PowerPulse Massage spray, full body spray, power spray, combination massage power spray, combination massage full body spray, and water saving.
- Therapeutic Strength Shower Massage: Features patented PowerPulse Massage spray, clinically shown to help soothe muscle tension, increase flexibility, and promote restful sleep.
- DIY Easy Installation: Designed for quick installation on any standard shower arm without requiring a plumber or pipe tape.
The flexible neck allows for easy height and angle adjustments.
Setup and Installation
- Prepare the Shower Arm: Ensure your existing shower arm is clean and free of debris. Remove any old shower head.
- Inspect Components: Verify all components are present: 18-inch Flexible Neck Arm, 7-Mode Shower Head, and any included washers.
- Attach Flexible Neck Arm: Screw the flexible neck arm onto your standard shower arm. Hand-tighten only. Do not overtighten.
- Attach Shower Head: Screw the 7-mode shower head onto the flexible neck arm. Hand-tighten only.
- Check for Leaks: Turn on the water and check for any leaks. If leaks occur, ensure connections are hand-tightened properly. Pipe tape is generally not needed but can be used if necessary for a secure seal.
Optional: Water Flow Optimization
Some users may find the factory-set water flow restrictive. The shower head contains internal components designed to regulate water flow for efficiency. If you experience significantly low water pressure, you may consider inspecting these components. This modification may void your warranty.
- Locate Restrictors: Inside the end of the flexible neck arm that attaches to the shower pipe, you may find a white filter and a blue flow restrictor disc.
- Removal (Optional): Carefully remove the washer holding the white filter. Then, using a small tool like a dental pick or a straightened paper clip, gently pry out the blue flow restrictor disc. Ensure the black washer is re-seated correctly before reattaching the shower head.
- Test Flow: After reassembly, test the water flow.
Installation is designed to be quick and simple.
Operating Instructions
To select a spray setting, rotate the dial on the face of the shower head. The Waterpik PowerPulse XPP-703E offers 7 distinct spray settings:
- PowerPulse Massage Spray: A concentrated, high-intensity massage.
- Full Body Spray: A broad, encompassing spray for general showering.
- Power Spray: A strong, focused spray.
- Combination Massage Power Spray: Combines the PowerPulse massage with a strong power spray.
- Combination Massage Full Body Spray: Blends the PowerPulse massage with a full body spray.
- Water Saving Spray: A reduced flow setting for water conservation.
- Mist Spray: A fine, gentle mist.
Adjust the flexible neck arm to direct the spray to your desired height and angle. The arm will hold its position once set.
The shower head offers multiple spray patterns for a personalized experience.
Official Waterpik video demonstrating the PowerPulse Flex shower head's adjustable height and various spray settings.
Maintenance
Regular cleaning will help maintain the performance and appearance of your Waterpik shower head.
- Cleaning Nozzles: To remove mineral deposits, gently rub the rubber nozzles on the shower head face.
- General Cleaning: Clean the shower head and flexible neck arm with a soft cloth and mild soap. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
- Deep Cleaning (if needed): For stubborn mineral buildup, you can soak the shower head in a solution of equal parts white vinegar and water for a few hours, then scrub and rinse thoroughly.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow/Pressure | Mineral buildup in nozzles or internal flow restrictors. | Clean nozzles as described in Maintenance. If flow remains low, refer to the "Optional: Water Flow Optimization" section under Setup and Installation for information on internal flow restrictors. |
| Leaking at Connection Points | Loose connections or improperly seated washers. | Ensure all connections are hand-tightened. Check that washers are correctly seated. Apply plumber's tape if necessary. |
| Flexible Neck Does Not Hold Position | Insufficient water pressure or internal issue. | Ensure adequate water pressure. If water flow restrictors were removed, this issue is less likely. If the problem persists, contact customer support. |
Specifications
- Brand: Waterpik
- Model Number: XPP-703E
- Style: PowerPulse Massage
- Shape: Round
- Material: Plastic
- Finish Type: Chrome
- Installation Type: Wall Mounted
- Flow Rate: 1.8 GPM (Gallons Per Minute)
- Number of Settings: 7
- Item Dimensions (L x W): 21.25"L x 4.25"W
- Hose Length (Flexible Neck): 18 Inches
- UPC: 073950305792
Warranty and Support
The Waterpik PowerPulse XPP-703E Shower Head comes with a Lifetime Limited Manufacturer Warranty.
For any product questions or support needs, please contact Waterpik's Fort Collins, Colorado support team. Refer to the product packaging or the official Waterpik website for current contact information.
Note: Modifying the product, such as removing flow restrictors, may affect warranty coverage.