Arebos Workshop Trolley User Manual

1. Introduction

Thank you for choosing the Arebos Workshop Trolley. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool storage solution. Please read this manual thoroughly before assembly and use, and keep it for future reference.

Image: The Arebos Workshop Trolley, showcasing its robust design and organized tool storage.

2. Safety Instructions

Always observe the following safety precautions to prevent injury or damage to the product.

• Weight Capacity: Do not exceed the maximum weight capacity of 30 kg for the entire trolley. Distribute weight evenly across drawers and the top surface.
• Stability: Always engage the parking brakes on the swivel castors when the trolley is stationary to prevent unintended movement.
• Drawer Safety: The trolley features an interlock safety system, allowing only one drawer to be opened at a time. This prevents the trolley from tipping over when loaded. Do not attempt to force multiple drawers open simultaneously.
• Movement: When moving the trolley, ensure all drawers are closed and locked. Use the push handle for controlled movement.
• Surface: Place the trolley on a flat, stable, and level surface.
• Children and Pets: Keep children and pets away from the trolley, especially when drawers are open or when moving the unit.
• Maintenance: Regularly inspect the trolley for any signs of damage, loose parts, or wear. Do not use if damaged.

3. Product Overview

The Arebos Workshop Trolley is designed for efficient and organized storage of tools in workshops, garages, or home environments. It comes equipped with a comprehensive set of 81 tools.

Key Features:

• Robust steel construction for durability.
• Scratch-resistant worktop.
• Four smooth-gliding ball-bearing drawers.
• Anti-slip mats in drawers to keep tools in place.
• Large bottom storage compartment.
• Two fixed and two swivel castors with parking brakes for mobility and stability.
• Ergonomic push handle.
• Interlock safety system to prevent tipping.

Image: Detailed view of the trolley highlighting its key features and components.

Included Tools (81 pieces):

The trolley comes pre-filled with a variety of commonly used tools, organized in foam inserts within the drawers.

Image: A selection of the 81 included tools, neatly organized in their respective trays.

• Socket and Ratchet Set
• Pliers Set (e.g., combination pliers, diagonal pliers, long nose pliers)
• Screwdriver Set (various sizes and types)
• Combination Wrench Set
• T-handle Hex Key Set
• And other essential hand tools.

4. Setup

The Arebos Workshop Trolley comes largely pre-assembled. Follow these steps for final setup:

1. Unpacking: Carefully remove all packaging materials. Inspect the trolley for any shipping damage.
2. Castor Installation (if not pre-installed): Attach the two fixed castors to one end of the trolley and the two swivel castors with brakes to the other end. Ensure all bolts are securely tightened.
3. Handle Attachment: Securely attach the push handle to the side of the trolley using the provided hardware.
4. Drawer Contents: Verify that all 81 tools are present and correctly seated in their anti-slip foam inserts within the drawers.
5. Positioning: Move the trolley to its desired location. Engage the parking brakes on the swivel castors to secure it in place.

Image: The workshop trolley ready for use in a professional garage environment.

5. Operating Instructions

Using the Drawers:

• To open a drawer, gently pull the handle. The ball-bearing slides ensure smooth operation.
• Due to the interlock safety system, only one drawer can be opened at a time. If a drawer does not open, ensure all other drawers are fully closed.
• To close a drawer, push it firmly until it clicks into place.
• Always ensure tools are properly seated in their foam inserts before closing drawers to prevent damage or rattling.

Image: The ball-bearing system ensures smooth and effortless drawer operation.

Moving the Trolley:

• Before moving, ensure all drawers are securely closed.
• Release the parking brakes on the swivel castors.
• Use the push handle to guide the trolley. The swivel castors allow for easy maneuverability.
• When the trolley is in its new position, engage the parking brakes to prevent accidental movement.

6. Maintenance

Regular maintenance will ensure the longevity and optimal performance of your Arebos Workshop Trolley.

• Cleaning: Wipe down the exterior surfaces with a damp cloth and mild detergent. Avoid abrasive cleaners or solvents that could damage the finish.
• Drawer Slides: Periodically apply a small amount of silicone spray or light grease to the ball-bearing drawer slides to maintain smooth operation.
• Castors: Check the castors regularly for debris (e.g., hair, string) that might impede movement. Clean as necessary. Ensure castor bolts remain tight.
• Tool Organization: Keep tools organized in their designated slots to prevent damage to the tools or the drawer inserts.
• Storage: Store the trolley in a dry environment to prevent rust, especially if it is made of steel.

7. Troubleshooting

8. Specifications

Image: Dimensional drawing of the Arebos Workshop Trolley.

9. Warranty and Support

For warranty information or technical support, please contact Arebos customer service. Refer to your purchase documentation for specific warranty terms and contact details.

Manufacturer: Canbolat Vertriebs GmbH

Note: Information regarding spare parts availability is not provided in the product specifications.