Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Cecotec Power Black Titanium Blender 1800 GB. Please read it thoroughly before first use and keep it for future reference.

Image: The Cecotec Power Black Titanium Blender 1800 GB, showcasing its main unit, glass jug, and portable bottle, surrounded by various fruits like bananas, mangoes, and berries, indicating its use for blending. The blender features a black finish and a clear jug with measurement markings.
Safety Instructions
- Always ensure the blender is unplugged before assembly, disassembly, or cleaning.
- Do not immerse the motor base in water or any other liquid. Clean with a damp cloth only.
- Keep hands and utensils out of the blending jug while the appliance is operating to prevent serious injury.
- Ensure the lid is securely in place before operating the blender.
- Do not blend hot liquids that exceed the maximum fill line, as this may cause scalding.
- Avoid blending extremely hard ingredients that could damage the blades or motor.
- This appliance is for household use only. Do not use outdoors.
- Supervise children when the appliance is in use.
Product Components
Your Cecotec Power Black Titanium Blender 1800 GB includes the following main components:
- Motor Base: Contains the powerful 1800W motor and control dial.
- Glass Jug: 1.8 L capacity, made of high-impact resistant molten glass.
- Blade Assembly: Features 6 titanium-coated sheets for efficient blending.
- Lid with Dosing Cap: Ensures a secure seal and allows adding ingredients during operation.
- Portable Bottle (600ml): Accessory with an airtight lid for on-the-go shakes.
- Pulp Filter: For making juices without pulp.

Image: A close-up view of the Cecotec Power Black Titanium Blender, showing the black motor base, the clear glass jug with measurement lines, and the separate portable blending bottle. This image highlights the main unit and its accompanying bottle.
Setup
- Unpack: Carefully remove all components from the packaging.
- Clean: Before first use, wash the glass jug, blade assembly, lid, and portable bottle with warm soapy water. Rinse thoroughly and dry. The blades are easily removable and dishwasher safe.
- Assemble Jug: Ensure the blade assembly is securely attached to the bottom of the glass jug.
- Place on Base: Position the glass jug onto the motor base. The Security Check System ensures operation only if the bowl is properly placed.
- Connect Power: Plug the power cord into a suitable electrical outlet (220V).
Operating Instructions
Using the Main Blender Jug
- Add Ingredients: Place your desired ingredients into the glass jug. Do not exceed the maximum fill line.
- Secure Lid: Place the lid firmly onto the jug. Ensure the dosing cap is also in place.
- Select Speed: Turn the control dial to select one of the 5 adjustable speeds. Start with a lower speed and gradually increase if needed.
- Turbo Function: For maximum speed and crushing ice, turn the dial to the "Turbo" setting. Use in short bursts for best results.
- Add During Blending: If necessary, remove the dosing cap to add ingredients while the blender is running.
- Stop: Turn the dial back to "0" to stop the blending process.
Using the Portable Bottle Accessory
- Add Ingredients: Place ingredients directly into the 600ml portable bottle.
- Attach Blade: Screw the blade assembly onto the open end of the portable bottle.
- Invert and Place: Invert the bottle and place it onto the motor base, ensuring it locks securely.
- Blend: Operate the blender using the speed settings or turbo function as described above.
- Remove and Enjoy: Once blended, remove the bottle from the base, unscrew the blade assembly, and attach the airtight lid for portability.
Using the Pulp Filter
The included filter can be inserted into the main jug before adding ingredients to create pulp-free juices. Ensure it is properly seated before blending.
Maintenance and Cleaning
- Unplug: Always unplug the blender from the power outlet before cleaning.
- Jug and Blades: The glass jug, blade assembly, lid, and portable bottle are dishwasher safe. For manual cleaning, rinse immediately after use. For stubborn residue, fill the jug with warm water and a drop of dish soap, then run the blender on a low speed for a few seconds. Rinse thoroughly.
- Motor Base: Wipe the motor base with a damp cloth. Do not immerse it in water.
- Storage: Store the blender in a dry place, away from direct sunlight and heat.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Blender does not turn on. | Not plugged in; Jug not properly seated; Overload protection activated. | Ensure power cord is securely plugged in. Check that the jug is correctly placed on the motor base (Security Check System). Unplug, wait 15 minutes for motor to cool, then try again. Reduce load if overloaded. |
| Ingredients are not blending smoothly. | Too little liquid; Too many ingredients; Ingredients are too large. | Add more liquid. Reduce the amount of ingredients. Cut ingredients into smaller pieces. Use the turbo function for tougher ingredients. |
| Loud noise or burning smell. | Overload; Motor malfunction. | Immediately turn off and unplug the blender. Reduce ingredients. If the issue persists after cooling, contact customer support. |
| Leakage from the bottom of the jug. | Blade assembly not tightened; Seal damaged. | Ensure the blade assembly is securely tightened to the jug. Check the rubber seal for damage and replace if necessary. |
Specifications
- Model: 04310
- Power: 1800 W
- Voltage: 220 V
- RPM: 22000 rpm
- Jug Capacity: 1.8 L (molten glass)
- Blade Material: 6-sheet titanium-coated stainless steel
- Speeds: 5 adjustable speeds + Turbo function
- Dimensions: 22 x 21.5 x 50.5 cm
- Weight: 4.93 kg
- Special Features: Portable bottle accessory, pulp filter, Metaluxe gear, Security Check System, non-slip base.
Warranty and Support
Your Cecotec Power Black Titanium Blender 1800 GB is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Cecotec website.
For technical support, spare parts, or any inquiries regarding your product, please contact Cecotec customer service. Contact details can typically be found on the Cecotec website or on the product packaging.
Note: Keep your purchase receipt as proof of purchase for warranty claims.





